Fanttik E1 Max 3.7V Mini Electric Screwdriver User Manual
- July 15, 2024
- Fanttik
Table of Contents
Fanttik E1 Max 3.7V Mini Electric Screwdriver
Thank you for purchasing the Fanttik NEX E1 Max Electric Precision Screwdriver Kit Please read this manual carefully before use, and retain it for future reference.
Product Overview
- Type-C charging port
- Torque Knob
- Charging Indicator
- Forward/Reverse rotation button
- LED Lights
- Bit Holder
Storage
- Inner Box of Storage Box
- Screwdriver Bit
- Electric Precision Screwdriver
- The casing of the Storage Box
How to open/close the storage box
- Press down the top surface (avoid the screwdriver) of the inner storage box, and the storage box will pop up, meanwhile, the screwdriver will pop up from the storage box.
- Press the top surface of the inner storage box again to close the storage box, then press down the screwdriver for storage
Note: after pressing the inner box, it will eject and easy to fall.
Storage of Screwdriver Bit
- Bits are stored in the magnetic holders in the inner box. A tweezer and a pry bar are included. After use, put the bit back to the magnetic holder and it will be attracted by a magnet.
How to Use
Forward/Reverse rotation button
- Press the V button to turn in or tighten the screws.
- Press the ^ button to loosen or remove screws.
Magnetizer and Demagnetizer
- Swipe bit tips a few times in the Magnetizer or Demagnetizer window for immediate magnetization or demagnetization.
Torque knob
- When the torque knob is set to level a, the device will shut down.
- When the torque knob is set to level L, it is in low torque mode.
- When the torque knob is set to level H, it is in high torque mode.
Bit Installation
- Remove the screwdriver bit from the inner box of the storage box, then insert the bit into the bit holder.
Indicator Status
- If the battery level is below 20% when the screwdriver is in use, the indicator will blink red quickly for 5 seconds, and it will turn off when the button is released. Please charge the battery in time.
- When charging, the indicator will slowly blink red.
- When the battery is fully charged, the indicator will stay white.
- Pressing the button will turn on LED lights simultaneously. The LED light will turn off automatically in 10 seconds without operation.
Specification
- Model : NEX E1 Max
- Item Dimensions : 178.6 × 43.8 × 43.8 mm
- Net Weight : 421g
- Screwdriver Dimensions : 159 × Ф16.4 mm
- Charging Time : 160-200 min
- Maximum Torque of Level L : 0.05 N•m
- Maximum Torque of Level H : 0.2 N•m
- Maximum Torque of Manual : 3 N•m
- Charging Power : 5 V = 0.14 A
- Rated Voltage : 3.7 V
- Lithium Battery Capacity : 350 mAh
- Rotation per Minute (Unloaded) : 200 rpm
Screwdriver Bit Parameters
- Bit Size: C4 × 28 mm, C4 × 45 mm
- Cross Head: PH0000/PH000/PHOO/PHO/PH1/PH2
- Hex: H0.7/H0.8/H0.9/H1.0/H1.3/H1.5/H2.0/H2.5/H3.0
- Flat Head: SL1.0/SL1.5/SL2.0/SL2.5/SL3.0/SL3.5
- Y Type: YO.6/Y1.0/Y2.0/Y2.5/Y3.0/Y1
- Torx: T2/13/14
- Squ: SO/S1
- Bit Material: S2 Steel
- Penta: P2/P5/P6
- W Type: W1.5
- SIM Ejector: 0.8
- Tri: 2.0/2.3/2.5
- U Type: U2.0/U2.6/U3.0
- Torx with holes: TR5/TR6/TR7/TR8/TR9/TR10/TR15
Note: PHO/PH1/SL2.0/TR8/TR10/H2.0 is C4 x 45 mm, the remaining is C4 × 28 mm.
Warranty
Your Warranty Include
-
30 Days Money Back Guaranty.
Within the first 30 days of your purchase, you are allowed to return your product for a full refund. -
30 Days to 3 Months.
We will replace the defective unit due to manufacture fault with a new one. 3 Months to 24 Months. -
Within 24 months, we will provide timely and effective online after-sales service after your purchase. Please note that accessories are free, and not included.
Please visit the official website for the Declaration of Conformity.
FAQs
What type of battery does the Fanttik E1 Max use?
The Fanttik E1 Max uses a rechargeable lithium-ion battery.
How many precision bits come with the Fanttik E1 Max?
The Fanttik E1 Max comes with 50 precision bits in 9 different categories.
What is the maximum torque of the Fanttik E1 Max?
The Fanttik E1 Max has a maximum torque of 0.2 Nm, with a manual torque of 3 Nm.
How long does it take to fully charge the Fanttik E1 Max?
It takes approximately 1 hour to fully charge the Fanttik E1 Max.
What material is used for the body of the Fanttik E1 Max?
The body of the Fanttik E1 Max is made from high-quality aluminum alloy.
Is the Fanttik E1 Max suitable for heavy-duty tasks?
The Fanttik E1 Max is designed for precision work and is best suited for delicate electronics and small projects.
What is the rotation speed of the Fanttik E1 Max?
The Fanttik E1 Max has a rotation speed of 200 RPM.
What is the rotation speed of the Fanttik E1 Max?
The Fanttik E1 Max comes with a magnetic case that keeps the screwdriver and bits organized and protected.
What type of charging port does the Fanttik E1 Max use?
The Fanttik E1 Max uses a USB Type-C charging port for convenient charging.
How many screws can the Fanttik E1 Max drive on a single charge?
The Fanttik E1 Max can drive up to 400 screws on a single charge.
What is the weight of the Fanttik E1 Max?
The Fanttik E1 Max weighs approximately 0.3 pounds.
Is the Fanttik E1 Max compatible with the Fanttik S1 Pro power screwdriver?
The Fanttik E1 Max can be purchased as a kit with the Fanttik S1 Pro power screwdriver.
Video- Fanttik E1 Max 3.7V Mini Electric Screwdriver
Download this Manual:Fanttik E1 Max 3.7V Mini Electric Screwdriver User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>