Fanttik C8 Ultra Duo Dash Cam Front Rear User Manual

Fanttik C8 Ultra Duo Dash Cam Front Rear

Product Information

Product Usage Instructions

1. Ensure that the product is placed on a stable and level surface.
2. Connect the power cord to the designated power outlet.
3. Press the power button to turn on the product.
4. Wait for the product to initialize and display the main menu on the screen.
5. Use the provided remote control to navigate through the menu options.
6. To select an option, press the OK button on the remote control.
7. Adjust the settings according to your preference using the navigation buttons on the remote control.
8. To exit the menu, press the menu or exit button on the remote control.
9. To turn off the product, press and hold the power button until it shuts down.

Read this manual carefully before use and keep it for future reference.

SPECIFICATIONS

• Product Name: Dash Cam
• Product Model: CB ULTRA DUO
• Size: 106•37•26mm
• Product specification: 12V/1A
• Storage: Built-in eMMC with a storage capacity of 32G, external Micro SD Card can support 256G at the maximum (adaptive to Class 10 above)
• Operating Temperature: -20″C-70″C (-4°F -158°F)

PACKAGE CONTENTS

PRODUCT OVERVIEW

1. Holder for the main device
2. Parking monitoring indicator light
3. Front recorder camera
4. Micro SD Card slot
5. Function button
6. Reset button
7. Speaker
8. Type-C port
9. Operating light
10. Microphone
11. Lens angle adjustment handle
12. Rear camera

LED INDICATOR INSTRUCTION

Work

indicator

| Normal recording: Blue light is always on.
Parking monitoring: Red light is always on
Abnormal state/Upgrading: Red light flashes quickly
Eventvideo/Emergencyvideo/Photo video: Buie light flashes quickly.
USB data transmission mode: Purple light is always on.
Name| Description
---|---

Power button

| Click to open or close recording Long press 5S to power on and off Long press 70S forced restart
Reset button| Reset function

Specification

Sensor

| Front :SONY IMX415
Rear. SONY IMX307

Resolution

| 2160P @25fps+ 10B0P @25fps
1600P@25fps + 1080P@25fps
1080P@85fps + 1080P@25fps
Front lens| 7 Glass+ASPH,FOV 140″, F1.8
Rear lens| 4 Glass,FOV 130″, F2.2
Video Compression| H.264/H.265
WDR| Support
WiFi| 5G
GPS| Support
Recording| Support
Voic e Command| Support,”Take photo;

Turn on audio; Turn off audio.”

---|---
ADAS| Support
SR| Support
G – sensor| Six axis
Memory| eMMC 32G + Micro SD Card (adaptive to Class 10 above)
Max Memory| 256G
Woking Voltage| 12V
Working Currency| 1A
Capacitor| 2.5F, 5V
Operating

Temperature

| (-20″C-70″C)(-4°F-158″F)
Storage

Temperature

| (-40″C-85″C)(-40°F-185°F)
Size|

Installation

There are two ways to connect and install the recorder:

1. Charge via cigarette lighter:
   Insert the car charger into the cigarette lighter and connect the car charger and recorder through the power cord (3M). Most of the power cord will be embedded in the automobile plastic shield, a small part of it will be exposed in the car, the wiring operation could be simple and easy.

2. Connecting the Hardwire kit cable to the fuse box to get electricity through the step-down wire:
   using the dark wire can ensure the neatness and appearance of the car. This wiring and electricity installation­methodcan realize the function of parking monitoring. The wiring operation is relatively complicated.In order to avoid vehicle damage caused by misoperation, please complete the installation at a professional car service point.
   Note: The Hardwire kit needs to be purchased separately or a package that includes the hardwire kit cable .

The following describes the installation operation of the cigarette lighter.

1. Wipe the front windshield clean Wipe the front windshield with a clean, soft cloth to ensure the brackets are securely attached.

2. Insert the recorder into the bracket and fix it Take out the recorder and bracket insert the recorder into the bracket sleeve, there is a magnet inside the bottom
   of the bracket which can attract the recorder to fix it.

3. Turn on the power

4. Insert the Type-C end of the power cord into the recorder,and tighten the screw corresponding to the screw hole of the recorder.

5. Connect the other end of the power cable of car charger, and plug the car charger into the cigarette lighter.

6. After the car is started, the recorder is powered on and automatically starts up, and a start-up prompt sound is issued, and the recorder starts recording at this time.

7. Determine the installation position of the recorder and adjust the lens angle Refer to the mobile phone Fanttik Cam App to connect the recorder.

8. After connecting the Fanttik Cam App with the recorder , enter the Fanttik Cam App, select “Device > Enter the Recorder”, enter the “Now & Back” interface, and the level will be displayed on the screen. midline and vertical midline .

9. Place the recorder in the middle of the front windshield,make the bottom of the bracket stick to the front windshield, with the lens facing outward and the power interface facing right.
   Move the recorder left and right according to the horizontal center line and vertical center line in the screen to ensure The center line of the front of the car is at the vertical center line, and then adjust the handle up and down to move the lens up and down to ensure that the disappearing line of the ground plane is at the horizontal center line of the screen.
   Notice: Please refer to the horizontal center line and vertical center line to determine the position of the recorder, otherwise some functions of the recorder will be affected.

10. Fixed recorder

11. After determining the installation position of the recorder,stick the electrostatic sticker on the installation position.

12. Tear off the 3M adhesive film on the bracket and stick the bracket to the center of the electrostatic sticker through 3M adhesive.

Note: Please pay attention to the direction and position when pasting. 3M adhesive is a one-time item, please make sure that the recorder is installed at the correct shooting angle.

6. Wiring
   Route the power cord from the cigarette lighter to the fixed position of the recorder as shown in the wiring diagram below. Use the included spudger to snap the power cord into the plastic car cover.

APP Program instructions

Install Fanttik Cam APP
Scan the QR code below or download the “Fanttik Cam” app through the iOS/Android APP market .

Pair Smart Phone to Dash Cam

1. Keep the Dash Cam and mobile phone within 2.5 meters.
2. Launch Fanttik Cam App, tap on “Device> Connect new devices”.
3. Choose your Fanttik Dash Cam from the network list (For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WLAN from “Settings->WLAN”}. The Dash Cam’s default SSID (or Wi-Fi name} is”WIFI_ Fanttik_XXXX.
4. Enter the password (the default password is ‘1234567890’}.
5. Enter Fanttik Cam App, wait a few seconds until the preview screen show.
6. If you forget the changed recorder Wi-Fi password, you can reset the recorder by holding down the 6S reset button to initialize the recorder Wi-Fi password. The initial Wi-Fi password of the recorder is 1234567890.

Preview

1. Open the FanttikCam App, and add your Dash Cam.
2. Select “Device> Entering” tab, this will bring you to the preview page.
3. Rotate your smartphone or press expand icon, turn the preview screen to landscape mode.
4. Click and drag the time line left and right at the bottom of the screen to create a preview of your desired recording starting point, then click on the thumbnail selection, or wait 5 seconds for buffering. you can watch the history.
5. Click” “to enter the rear camera screen
   • Yellow axis : Time-lapse video
   • Grey axis : Normal Record
   • Red axis: Emergency video
     Note: The recorder will stop recording when the app previews playback

Download Video Files

1. Tap and left/right drag time line bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
2. Tap onfrom preview screen to enter the download interface.
3. After the video has finished downloading, click “Complete”.
4. You can choose to open SR to download videos, which are more informative.
5. The recorder supports downloading video clips with a minimum of 5 seconds and a maximum of 3 minutes.
6. The downloaded video will be saved in the local album of the Fanttik Cam App, and will be synchronously saved in the local photo album of the mobile phone. You can enter the ”Video” interface of “Me> Local Album” of the Fanttik Cam App or enter the mobile phone View or delete from the local album .

Edit and Share Photos

1. Enter the Fanttik Cam App, click “Me> Local Album”, enter the “Local Album” page, select the photos you want to edit and share, and click “Share” at the bottom of the interface.
2. Enter the editing interface, “Filter”, “Cut”, “Subtitle” are displayed at the bottom of the interface, you can add filters, subtitles, and crop the screen.
3. After completing the above editing, click “Complete” in the upper right corner of the interface to enter the sharing interface. You can choose any social media platform to share the edited photo to Facebook, Twitter and other platforms.

Edit and Share Videos

1. Enter the Fanttik Cam App, click “Me> Local Album”, enter the “Local Album” page, select the photos you want to edit and share, and click “Share” at the bottom of the interface.

2. Enter the editing interface, the bottom of the interface displays “Crop”, “SR style “, “Background music “, you can cut, background music , and overlay SR effects on the video .

3. After clicking “Crop”, you can cut the desired video clip by dragging the white borders on both sides left and right. The video can be intercepted with a maximum of 30 seconds and a minimum of 5 seconds .

4. After clicking “Background music”, a variety of soundtracks will be displayed at the bottom of the interface , and you can choose according to your own preferences.

5. After completing the above editing, check “Original picture quality” at the bottom of the screen, and then click “OK” in the upper right corner of the interface.
   Note: If “Original picture quality” is not checked , the video will be compressed and the quality of the video will be poor.

6. After waiting for the video to be synthesized, enter the sharing interface, you can choose any social media platform to share the edited video to the Facebook Twitter, TikTok and other platforms.

Function introduction

Parking monitoring
The recorder is connected to the fuse box through the hardwire kit cable to obtain power, which can realize the function of parking monitoring.
Parking monitoring, that is, when the vehicle is parked and turned off, the recorder is still in working state. Through the recorded video, you can check whether the vehicle has collided during the parking and turning off.
Note: The Hardwire kit cable cable needs to be purchased separately or a package including the hardwire kit cable ; the operation of connecting the fuse box to get electricity is complicated. To avoid vehicle damage caused by misoperation, please complete the installation at a professional car service point.
The default parking monitoring recording mode of the recorder is “time-lapse recording”, and supports three parking monitoring recording modes of “Time- lapse video”, “Normal Record” and “Sleep”.
Time-lapse video captures one frame per second, and plays at a speed of 30 frames per second. Time-lapse video can extend the recording time. The same memory card can extend the recording time by 30 times under the same state. Compared with ordinary video recording, time-lapse video takes up less memory and speeds up viewing.

Declare:

1. Select time-lapse video for parking monitoring video mode . After 15 minutes of parking, the Wi-Fi of the recorder will be turned off.
2. You can check how to set the collision sensitivity of the recorder in Setting Collision Sensitivity .
3. In normal recording, within the set recording duration, if a collision occurs, the recorder will not exit the parking monitoring, and the recorder will generate associated photos and associated videos_
4. In the time-lapse video recording, if there is a collision within the set recording time, the recorder will not exit the parking monitoring, and the recorder will generate an associated photo.
5. Select “Sleep” to turn off the parking monitoring function. After the flame is turned off, the recorder does not work and does not record video.if a collision occurs.the recorder was awakened.
6. Parking monitoring video mode selection time-lapse video/normal video, After the vehicle is parked and turned off, When the parking monitoring time reaches the set recording time, the recorder will enter standby dormancy. If the recorder turns on the collision sensitivity, when the vehicle collides, the recorder will be awakened, and it will go to sleep after working for 2 minutes.
7. You can check how to set the recording duration in Selling the recording duration of parking surveillance .
   • The default parking monitoring video duration of the recorder is “24 hours “, and supports five parking monitoring video duration options of “12 hour “, ” 24 hours “and” 48 hours”
   • When the vehicle battery voltage is lower than the set vehicle battery protection value, the recorder will automatical­ly shut down to protect the vehicle battery.
   • The default vehicle battery protection value of the recorder is” 12V “, and it supports the selection of vehicle battery protection value in three gears:” 12.4V “,” 12V” and” 11.BV “.
   • The lower the selected vehicle battery protection value, the longer the parking monitoring video time that the recorder can record; the higher the selected vehicle battery protection value, the shorter the parking monitoring video time that the recorder can record.

Collision Latch

• When the recorder is in working state, it detects a collision (such as emergency braking of vehicles or emergency situations such as collision), which will trigger a photo to generate an emergency photo and an emergency related video , which will be stored separately and will not be covered by the normal recording cycle.
• The higher the collision sensitivity of the recorder is, the easier it is to trigger the photo; the lower the sensitivity of the recorder, the less likely it is to trigger the photo.
• The default collision sensitivity of the recorder is “Middle”, which supports the choice of four gears of collision sensitivity : “High “, ” Middle “, ” Low” and “Off” .
• The default emergency associated video duration of the recorder is ” 1 Os”, and supports three emergency associated video duration options of ” 10s “, • 20s “and ” 30s “. You can switch the duration of the emergency link video by any of the following methods .

ADAS intelligent driving assistance
The ADAS intelligent auxiliary system only includes the function of the vehicle in front to start It is recommended that the dashcam be installed in the center as far as possible, otherwise the deviation of the function will be affected. If you don’t need this feature, you can turn it off.

Declare:

• If you need to change or have changed the installation position or lens angle of the recorder in order to obtain a more accurate ADAS intelligent driving assistance experience, you need to re- calibrate the ADAS intelligent driving assistance.
• The calibration reset method is: after the mobile phone App is connected to the recorder, enter the App preview interface, click the settings icon in the upper right corner, enter the “Recorder Settings” interface, select “ADAS intelligent assistant reminder> ADAS effect reset”, and complete the recording according to the on-screen prompts position adjustment and ADAS intelligent driving assistance calibration reset.

Voice command

• On by default it can be turned off. Only English is supported. The recorder supports three kinds of voice commands, which are: Take photo; Turn on audio; Turn off audio.
• Select the voice “take photo”o the MIC of the recorder, the recorder will capture a photo and generate an associated video. The video duration can be selected from “1 Os”, “20s”, “30s” and “Off”.lf “Off” is selected, the associated video will not be generated.

Recording
Open by default, you can choose voice open/close or APP open/close.
If the microphone recording is turned on, the sound will be recorded when the video is recorded; if the microphone recording is turned off, the sound will not be recorded during the video recording, and there is no sound in the video.

Switch video resolution
The higher the resolution setting, the higher the video recording clarity and the shorter the recording time; the lower the resolution setting, the lower the video recording clarity and the longer the recording time.
The default video resolution of the recorder is 4K (2160P), and it supports three resolution options: 4K (2160P), 2K (1600P), and full HD (1080P). You can switch the video resolution by any of the following methods.

SR
Note:

1. The real-time effect of SR is viewed in the preview interface , not the final effect of SR_
2. The SR data is for reference only, and the accuracy of the data has a great relationship with the installation position of the recorder.

Dual memory
Recorder storage mode: 32G eMMC+ Max.256G TF Card When the recorder has no TF card: normal recording & parking monitoring video are stored in eMMC in chronologi­cal order, when the eMMC is full the video at the far end of the time is automatically deleted to realize loop recording; when the recorder has a TF card: normal recording & parking monitoring The videos are stored in eMMC in chronological order. When the eMMC is full the video files at the remote end of time are moved to the TF card.

One – click copy
Recorder supports one-click copying of video in eMMC to TF card.
To enter the “Recorder Settings” interface, click “Copy file to TF card”, select the file to be copied, and copy the photo or video stored in the eMMC to the TF card.

Note:

1. The eMMC video is moved into the TF card, and the video in the eMMC is deleted;
2. When the space in the TF card is sufficient it is moved and stored in the TF card in chronological order;
3. When the space in the TF card is insufficient, the time distance in the TF card is the farthest Delete the video to make room for the eMMC content, and the video in the eMMC is written to the TF card in order.

Format memory
For your better use of the recorder, it is recommended that you format the memory every one to three months. After the recorder is formatted in the memory, all the video and photo files in the recorder will be cleared . Please back up the data before formatting.

1. After connecting the recorder to the mobile phone Fanttik Cam APP , enter the Fanttik, select “Device > Enter Recorder”, and enter the “Now&Back” interface;
2. Click the setting icon in the upper right corner , enter the “Camera Settings” interface, open “Manage Dash Cam Storage”, click “Format” , and clear all the video and photo files in the recorder .

Upgrade Firmware
Upgrade via App
If there is a new version of firmware released, after the mobile phone Fanttik Cam App is connected to the recorder, and after entering the Fanttik Cam App, an upgrade prompt will pop up, and the firmware upgrade can be completed according to the prompt.

Note: If the upgrade prompt is popped up and the upgrade is not performed, the app will pop up the upgrade prompt again the next time the phone is reconnected to the recorder ; enter the main interface of the Fanttik Cam App , and select “Me > About Fanttik > New firmware available” , and firmware upgrade is also available.

Upgrade via eMMC memory

1. When the recorder is turned off, use the Type-C data cable to connect the recorder to the computer,

2. Download the compressed file of the firmware upgrade package, decompress the upgrade package, and copy the decompressed update folder to the root directory of the built-in memory card of the recorder;
   Note: When unzipping, please select “Extract to the current folder”. After completion, please put the entire update folder into the root directory of the memory card, and do not copy the files in the folder separately .

3. When the recorder is powered on, the recorder will be automatically upgraded, and the upgrade will be completed after restarting.
   Note: Do not plug or unplug the power supply during the upgrade process.

Upgrade via SD:

1. When the recorder is off, take out the TF card and connect the TF card to the computer through the card reader;

2. Download the compressed firmware upgrade package, decompress the package, and copy the decompressed update folder to the root directory of the TF card.
   Note: Select Extract to Current Folder when decompressing the file. After the decompression is complete, put the update folder into the root directory of the memory card. Do not copy the files in the folder separately.

3. Install the TF card into the recorder and switch on the power. The recorder will automatically upgrade, and the upgrade will be completed after restart.
   Note: Do not power off your Dash Cam until it begins continuous recording as it may cause permanent damage to the Dash Cam.

Other

1. Turn on ‘Time Watermark”, the time and recorder model will be displayed on the recording screen; if “Time Watermark” is turned off , the time and recorder model will not be displayed on the recording screen.
2. Turn on the GPS speed display , and the GPS real-time speed will be displayed on the recording screen; if the GPS speed display is turned off, the GPS real-time speed will not be displayed on the recording screen.
3. Switch to H.265 video encoding mode, the video will be recorded in higher definition, but it has certain requirements on the configuration of the mobile phone.
4. If the power-on prompt sound is turned on, the recorder will have a prompt sound when it is turned on and off; if the power-on prompt sound is off, the recorder will have no prompt sound when it is turned on and off.

Warranty Info

Your Warranty Includes

12-Month Coverage
Within 12 months of purchase, we will provide timely and effective on line after-sales service. We will repair or replace any defective product (due to manufacturing fault) within the warranty period.

How to Return Your Fanttik Product
Contact support@fanttik.com with your order number.

If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.

www.fanttik.com
support@fanttik.com

METASEE LLC
5205 Broadway #634 Pearland Texas 77581 Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>