Fanttik V10 Mate Pivot Car Vacuum Cleaner User Manual

Fanttik V10 Mate Pivot Car Vacuum Cleaner

Quick Start Guide

Thank you for choosing Fanttik
Thank you for purchasing Fanttik vacuum cleaner. This is a cordless hand held vacuum cleaner with strong suction and multi-functional brush

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire or injury: All the safety and operating Instructions should be read before use and should befollow to avoid Injury, fire, electric shock, property loss, and other risks.

1. These appliances are intended for household use only.

2. This product has an internal battery. Do not put the device into fire or heat it. Do not charge, use, place it under high temperature conditions, and do not store it in the car in case of overheating, ignition or explosion.

3. It is recommended to charge.use or store the device between 32°F and 104 °F.

4. People with physica~ mental or sensory disabilities should not use the device for your safety.

5. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

6. Do not use the device with wet hands to avoid injury.

7. Do not use this device to vacuum up any liquid such as water and cola.

8. Do not vacuum smoking or burning things such as cigarette butts,matches,or hort ashes.

9. Do not vacuum hard or sharp objects to avoid injury when cleaning the dust bowl.

10. Do not use scented products on this equipment to avoid fire caused by the flammable chemicals in them.

11. Do not modify or repair the internal battery.

12. Do not use it in heated or moist places such as heating room and bathroom.

13. When the vacuum cleaner’s service life is over, please give it to the recycling location designated by the government because the internal battery cannot be taken out.

14. If the charging wire is damaged or broken, please stop using it immediately.

15. If you don’t use it for a long time, please unplug the charging cable after full charge and place it in a cool dry place. Charge it at least once every 3 months to avoid battery loss.

16. If the device needs to be transported, it is recommended to use the original packaging box and keep it in the “OFF” state.

17. Unplug from outlet when not in use and before servicing.

18. Do not allow to be used as a toy.Close attention is necessary when used near children.

19. Use only as described in this manual.Use only manufacturer’s recommended attachments.

20. If appliance is not working as it should.has been dropped,damaged,left outdoors.or dropped into water.return it to a service center.

21. Do not pull or carry by cord.use cord as a handle.close a door on cord.or pull cord around sharp edges or corners.Keep cord away from heated surfaces.

22. Do not put any object into openings. Do not use with any opening blocked.

23. Keep hair, loose clothing, fingers ,and all parts of body away from openings and moving parts.

24. Use extra care when cleaning on stairs.

25. Do not use to pick up flammable or combustible liquids.such as gasoline, or use in areas where they may be present.

26. Do not use without dust bag and/or filters in place.

27. Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

28. Recharge only with the charger specifired by the manufacture.

29. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs.flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

30. Do not use an appliance that is damaged or modified. Damaged or modifired batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

31. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130″C may cause explosion.

32. Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

33. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

34. Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.

35. Use only with Listed/Certified Information Technology{Computer) Equipment, or Listed/Certified ITE Power Supply, or Listed Class 2 Power Unit.

36. This appliance contains batteries that are non-replaceable.
    SAVE THESE INSTRUCTIONS

37. Please save the safety and operating instructions.We assume no responsibility for your property loss caused by improper use.

PRODUCT OVERVIEW

PACKAGE CONTENTS

HOW TO USE

How to assemble

Take out the main machine and press the pivot button to adjust the nozzle to the desired angle. Select the accessories(hard bristle brush and soft bristle brush) as required and install it on the front port. If you do not use a brush, there is a brush storage seat at the rear housing. You can put the brush here to avoid loss.

How to charge

1. Open the silicone cap on the rear housing.
2. Please use a 5V 2A I 5V 3A I 9V 2A for V10 Mate and 5V 3A I 9V 2A I 12V 1 .5A (PD1 SW) for V10 APEX power adapter (not included) and the type-C charging cable(includedl to charge. The type-C charging cable can only be used for charging.
3. It takes about 2-2.5 hours to fully charge. You can use the device in high speed mode for about 13 minutes or in low speed mode for about 30-35 minutes (V10 Mate is 30 min. and V10 APEX is 35 min.) after full charge.
4. The lithium-ion battery must be FULLY charged before first use and after long-term storage.
5. If not used for a long time, It is recommended to charge the device every three months.
   • V10 Mate: 5V= 2A/ 5V=3A/ 9V =2A
   • V10APEX: 5V-3A/9V-2A/ 12V-1.5A(PD18W)

V10 different usage states

• In the storage state
• In use, the nozzle angle can be adjusted as required. There are a total of seven angles to choose.
• In special circumstances, the extension tube can be pulled out for use

When using, press the pivot button, rotate to the appropriate angle according to the need, and then select a different brush, and install on the port for use. If necessary, the extension tube can be pulled out for use.

How to assemble

Take out the machine and press the pivot button to adjust the nozzle to the desired angle. Select the brush as required and install it on the nozzle. Use a different brush to clean as needed.

On/Off button

• Press to turn on (light on), then press to turn off (light off)

Speed switch button:

• Short press the speed switch button to switch to high speed and press again to switch back to low speed (long press the button for 1.5 seconds to turn off the lamp).

CLEAN AND MAINTENANCE

LED Indicator

TOXIC AND HAZARDOUS SUBSTANCES

TROUBLESHOOTING

If the following operations can not solve your problems, please stop using the device and contact the manufacture with E-mail: [email protected].

Toe device stops working, 0% battery and battery icon flashing red three times

| Under Voltage| Please charge the device
Toe device stops working and E3 flashes three times| Full sealed| Clean the air vent and filter before turning on the device
After pressing the power button, the device cannot be turned on, and the 0% battery and battery icons are flashing red| Under Voltage| Please charge the device
No indicator light when charging| Toe chagring cable is loose| Plug in charging cable
Fully charged| Unplug the charging cable
E1 flashes three times during charging| The adapter is incompatible with the device| Please use a 5V/2A or 5V/3A or 9V/2A power adapter to charge for V10 Mate;

Please use a 5V/3Aor9V/2Aor 12V/1.5A (PD18W) power adapter to charge for V10 APEX

Technical Data

451135139mm(unfolded)
Weight(g)| 1115| 1160
Battery capacity| 32000mAh| 42000mAh
Rated power| 100W| 130W
Runtime| High speed=13min / Low speed=30min| High speed=13min / Low speed=35min
Charging voltage| 5V/9VDC| 5V/9V/12V DC(PD18W)
Dust cap capacity| 500mL

WARRANTY CARD

Your Warranty Includes

• 12-Month Coverage
  • Within 12 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault) within the warranty period.
• How to Return Your Fanttfk Product
  • Contact [email protected]. with your order number.
  • We will issue you a return label for your return.
  • Tear off the ‘Return Details’ page and fill in the details. Include this inside yourreturn package.
  • We will issue your replacement/refund on receiving the return package.
  • [email protected].

Return Details

• In order to process your return as quickly as possible, we require the following information. Please fill out this form and include it in your return package.

Purchase Name:|
---|---
Order Number:|
Date of Purchase:|
Your Email Address:|
Place of Purchase:|

• If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.

CONTACT

• [email protected].
• Distributor/Handler. METASEE LLC
• Address/Adresse: 5205 Broadway #634 Pearland Texas 77581
• Manufacturer/Hersteller. Suzhou EUP Electric Co.,Ltd.
• Address/Anschrift: 90 Jinshan Road,Newdistrict.Suzhou 215011,China

EC/REP

• SCHEUFER Technologies GmbH
• Hertleinstrasse 37, 91052, Erlangen,
• Germany Email: [email protected].
• Phone / Fax: +4991319402597

UK/REP

• VISHTEC UK Co…,Ltd
• 275 ISLINGTON SUITE 1405 NEW NORTH ROAD LONDON ENGLAND N1 7AA
• Email: [email protected].
• Phone/Fax: + 44 1584 879 384

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>