MEAN WELL GC330 Series 330W Single Output Battery Charger Owner’s Manual

June 3, 2024
MEAN WELL

MEAN WELL GC330 Series 330W Single Output Battery Charger

MEAN-WELL-GC330 Series-330W Single-Output-Battery-Charger-FIG-
\(2\)

Features

  • Charger for lead-acid batteries
  • (flooded,Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese) (Note. 1)
  • 2 stage charging characteristic
  • Universal AC input/ Full range
  • Built-in active PFC function, PF>0.95
  • 3 pole AC inlet IEC320-C14
  • Class I power (with earth pin)
  • Protections: Short circuit / Over voltage/ Over temperature
  • Fanless design, cooling by free air convection
  • Fully enclosed plastic case
  • No load power consumption<1W
  • 2 color LED indicator for charging status
  • Approvals: UL/CUL/TUV/ EAC/ CB/FCC /CE/UKCA
  • 2 years warranty

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

MEAN-WELL-GC330 Series-330W Single-Output-Battery-Charger-FIG-
\(3\)

SPECIFICATION

ORDER NO. GC330A36- C4P GC330A48- C4P




OUTPUT

| SAFETY MODEL NO.| GC330A36| GC330A48
DC VOLTAGE (Typ.)| 40.8V| 54.4V
RECOMMENDED BATTERY CAPACITY Note.3| 20 ~ 65Ah| 20 ~ 65Ah
PEAK CURRENT(Typ.) Note 5| 8A| 6A
CONTINUOUS OUTPUT

CURRENT (Typ.) Note 6

| 6.4A| 4.8A
OUTPUT POWER RANGE| 261.1 ~ 326.4W| 261.1 ~ 326.4W
LED INDICATOR| Charging(CC) : RED           Floating charging(CV) : GREEN




INPUT

| VOLTAGE RANGE Note.4| 90 ~ 264VAC  127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.95 / 230VAC           PF>0.98 / 115VAC at full load
EFFICIENCY (Typ.)| 93.5%| 93.5%
AC CURRENT (Typ.)| 4A / 115VAC           2A / 230VAC
INRUSH CURRENT (max.)| 120A / 230VAC
LEAKAGE CURRENT(max.)| 1.5mA / 240VAC



PROTECTION

| SHORT CIRCUIT| Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE| 105 ~ 135% rated output voltage
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| 100℃±10℃(RTH2)
Protection type : Shut down o/p voltage, re-power on to recover



ENVIRONMENT

| WORKING TEMP.| -30 ~ +60℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03% / ℃ (0~40℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes


SAFETY & EMC

(Note. 7)

| SAFETY STANDARDS| UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P: 3KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032 class B, BS EN/EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CAN ICES-3(B)-NMB-(B), EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, light industry level, EAC TP TC 020


OTHERS

| MTBF| 1624.8K hrs min.       Telcordia SR-332 (Bellcore) ; 209.5K hrs min.        MIL-HDBK-217F (25℃)
DIMENSION| 2209546mm (LWH)
PACKING| 1.25Kg; 12pcs/16Kg/1.09CUFT
CONNECTOR| PLUG| See page 2
CABLE| See page 2
NOTE| 1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature.
3. This is MeanWell’s suggested range, please consult your battery manufacturer for their suggestions about maximum charging currentlimitation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
Test condition is at 25C the charging current vary with the ambient and components temperature. The lower temperature, the higher charging current.
5. Maximum charging current ill be in the range of 85-110% rated output Current.
7. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that whole system complies with the
EMC directives.
8. The ambient temperature derating of 3.5 C/1000m with fanless models and of 5 C1000m with fan models for operating altitude higher than 2000m(650oft).
xProduct Liability Disclaimer For detailed information., please refer to https://www.meanvwell.com/serviceDisclaimer.aspx

Mechanical Specification

MEAN-WELL-GC330 Series-330W Single-Output-
Battery-Charger-FIG- \(4\)

Plug Assignment

Standard male plug(power supply side): AMP 1-480702-0 equivalent

Female plug(customer side, not provide with the power supply):AMP 1-480703-0 equivalent

Charging Curve

Suitable for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese)

 |
---|---
GC330A36| 20-65Ah
GC330A48| 20-65Ah

**Derating Curve

MEAN-WELL-GC330 Series-330W Single-Output-Battery-
Charger-FIG- \(7\)**

Static Characteristics

Documents / Resources

| MEAN WELL GC330 Series 330W Single Output Battery Charger [pdf] Owner's Manual
GC330A36-C4P, GC330A48-C4P, GC330 Series 330W Single Output Battery Charger, GC330 Series, 330W Single Output Battery Charger, Single Output Battery Charger, Output Battery Charger, Battery Charger, Charger
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MEAN WELL User Manuals

Related Manuals