NEO Smartpen N2 Bluetooth Digital Pen User Guide

Neo smartpen A1
Quick Guide

What’s in the box

Part name

Get started

Turn on / off the pen

• When the pen is fully charged, press the Power button briefly.
  The pen will turn on, indicated by the LED.

• Press and hold the Power button for 2 seconds or longer while the pen is on to turn it off. The LED will flash in different colors before the pen is turned off.
  The pen will be automatically turned off after 5 minutes of inactivity.

• The power automatically will be turned on when you grip the pen.

• In case the pen ⓐ is not turning on, ⓑ is not charged or ⓒ does not work, press and hold the power button for 10 seconds to reset the pen.

Download the App & Pen connection

1. Download the app
   You can download NEO STUDIO from Google Play Store and App Store.
   Search “NEO STUDIO.”

2. App settings
   Enable the device’s “Bluetooth” and “GPS (location).”

3. Connect the app and the pen
   ① Open the app, and give required permissions.
   *The permission allowance is required to use the app without problems.
   ② Follow the instructions on screen to connect the app & the pen.
   (Once the connection between the app and the pen has been established, the pen’s LED will slowly blink in Green.)

How to use

• The location of the optical sensor greatly affects the handwriting recognition accuracy. Please note that your handwriting may not be recognized if you hold or use the pen at an incorrect angle or in the wrong direction.
• You can use the pen without connecting it to the app.
  You can connect it to the app afterward to automatically transfer the data.

How to hold the pen correctly
Make sure the pen point is up when you hold the pen.| Allowable Recognition Angle
Product’s acceptable recognitionangle is -20° ~ +40°. (90° verticalstandard)

Product specifications

Diameter: 11.3~13.9mm / 18.2g(without the pen cap)
Environment| Storage temperature : -10~50°C / Relative humidity: ~90%
Operating temperature: -10~50°C
Ink refills| C1 Gel 0.5mm(Only for Neo Smartpen)

LED indicator information

Precautions

• This product has a built-in optical sensor. The handwriting recognition may not work correctly in direct sunlight, outdoors, or under infrared light.
• Ensure the optical sensor is not blocked.
• Strong impact on the pen tip may cause damage to the pressure sensor.
• Leaving the product in places with a strong magnetic field, high temperature, or under direct sunlight for a long period of time may cause severe damage to the product.
• When not in use, close the pen cap. Lightly remove any dust or dirt from the input sensor with a cotton swab.
• Disassembling and reassembling the product will lead to product malfunction. In such cases, the warranty period will be void.
• You must use the recommended pen tip that is compatible with the product. We will not accept responsibility for any malfunction caused by non-compliance with this instruction.
• Parental supervision is required when children use this product.

Regulatory Compliance Information

FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT NOTE : FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

References

• Amazon
• 고객지원 | 네오랩컨버전스 기업 사이트

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>