NEO SMART BLINDS L-B200 Neo Blue Motors Installation Guide
- June 1, 2024
- NEO SMART BLINDS
Table of Contents
NEO SMART BLINDS L-B200 Neo Blue Motors
Product Specifications
- Product Name: Blue Link L-B200
- Compatibility : Compatible with Neo Smart Blinds motors with Blue Link port
- Connection: Blue Link cable connection
- Bluetooth : Requires Bluetooth-enabled smart device for pairing
Product Usage Instructions
Installation Steps
- Using the Blue Link cable, connect it to the Blue Link port on the motor’s head.
- Insert the other end of the Blue Link cable into the motor’s Blue Link port.
Blind Pairing Using Mobile Apps
- Ensure Bluetooth is activated on your smart device and is near the blind.
- Open the main app page and select the nearby Blue Link for pairing.
- Follow the app’s instructions to pair the blind with the app.
Note
Make sure to have the appropriate setup code and Smart Controller C-BR300 model added to the account for compatibility with Neo Smart Blinds motors.
FAQ
- Q : Which motors are compatible with the Blue Link L-B200?
- A : The Blue Link L-B200 is compatible with Neo Smart Blinds motors equipped with the Blue Link port on the motor’s head.
- Q : How do I know if my motor has a Blue Link port?
- A: Not all motor models come with the Blue Link port. Check your motor’s specifications or contact tech@neosmartblinds.com for more information.
Applicable to compatible Neo Smart Blinds motors
Compatible with the Blue Link port located on the motor’s head. Not all motor
models are equipped with this port.
Installation
Installation Steps
- Using the Blue Link cable, orient its connector to match the Blue Link connection located at one of its ends. Firmly grip each piece, align and push the cable connector. You may hear a muffled click, indicating it was properly connected.
- Locate the accessible side of the motorized blind with the Blue Link port on the motor’s head. Use the remaining Blue Link cable connector, align it with the motor’s port, and firmly insert it. Though a muffled click might not be audible, gently tug the cable to ensure the latch is securely in place.
Blind Pairing using mobile apps
Neo Smart Blinds Blue
Compatible to all motors with an internal or external Blue Link. Ensure your
smart device has Bluetooth activated and is near the blind. On the main app
page, you’ll find a list of nearby Blue Links available for pairing. Follow
the app’s instructions to proceed to pair the blind.
Neo Smart Blinds
Compatible with all motors with an internal or ex-ternal Blue Link as long as
they are equipped with a 433MHz RF module and a Smart ControllerC-BR300 model
is added to the account.
Note: All motors connected to a wand do not contain the 433MHz RF module
and therefore are not compatible.
- After creating the account with the appropriate setup code and adding the Smart Controller, you can pair the blind by tapping Menu > Add Blind and following the app instructions. If a remote control isn’t paired to the blind, select either of the two options on the left during the process.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>