AUKEY EP-T27 Soundstream Bluetooth Headphone User Manual

AUKEY EP-T27 Sound stream Bluetooth Headphone

Thank you for purchasing the AUKEY EP-T27 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S/M/L}
USB-A to C Cable
User Manual
Quick Start Guide
Warranty Card

Product Diagram

Specifications

Earbuds

Charging Case

Getting Started

Charging

Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB-A to C cable. When the charging indicator light on the outside of the case is blue, the case is fully charged. Charging takes around 2 hours, and after being fully charged, the case can fully charge the earbuds 4 times. The earbuds should be stored in the case when not in use.

Turning On / Off

Turn On| Open the lid of the charging case or touch and hold on the touch- sensitive panels on both earbuds fo r 4 seconds when they are turned off
---|---
Turn Off| Return both earbuds to the charging case and close the lid or touch and hold on the touch-sensitive panels on both earbuds for 6 seconds when they are turned on

Pairing

Starting with the earbuds in the case:

1. Open the lid of the charging case. Both earbuds will tum on automatically and connect with each other
2. Turn on the pairing function on the device you want to pair with the earbuds
3. From the list of available devices, find and select “AUKEY EP-T27 L or AUKEY EP-T27 R”
4. If there is a pop-up asking you to confirm the connection, tap “Pair”

Note
Some devices don’t follow the Qualcomm True Wireless Master-Slave pairing protocol and may display a message that “The connection was not successful.” However, this won’t affect the use

Regular Use After Pairing

Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Open the lid of the charging case, and both earbuds will tum on and connect with each other automatically
• To power off, put the earbuds back in the charging case and close the lid, and they will begin charging

Using the Left/Right Earbud Only

Starting with the earbuds in the case:

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select “AU KEY EP-T27 L” or “AUKEY EP-T27 R”

Notes

• When you tum on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found
• In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired
• If one of the earbuds has no sound output, put both earbuds back into the charging case and close the lid, then follow the steps to clear the previous pairing list to reset
• The wireless operating range is 1 Om (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 2 minutes

Clearing the Pairing List

Starting with the earbuds in the case:

1. Take both earbuds out of the charging case, and the earbuds will turn on. Touch and hold on the touch-sensitive panels on both earbuds for 6 seconds to tum them back off
2. Touch and hold on the touch-sensitive panels on both earbuds for l O seconds. The earbuds will turn on, clear their pairing list, and then enter pairing mode

Controls & LED Indicators

Streaming Audio

Once paired, you can wirelessly stream audio from your device to the earbud s. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.

Taking Calls

** Answer or end a call| Double-tap the touch-sensitive panel an either earbud ta answer or end a call
---|---
Use Siri or other voice assistants|  While your device is connected, triple- tap the touch-sensitive panel on either earbud
LED Charging Indicator (Earbuds)| Status
---|---
Red| Earbuds charging
Blue| Earbuds fully charged
LED Charging Indicator (Case)| Status**
---|---
Red| Case charging
Blue| Case fully charged
Blue| 30%-100%
Red| :$30%

**FAQ

**

The earbuds are on, but not connecting to my device.
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.

I’ve connected the earbuds with my smartphone but can’t hear any sound.
Double-check the volume level on your smartphone and the earbud s. Some smartphones require you to set up the earbuds as on audio output device before the audio can be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile

The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbud s. Try moving closer to your smartphone to rule out the possibility of interference  or  wireless range-related issues.

What’s the wireless range of the earbuds?
The maximum range is /Om (33ft). However, the actual range depends on environmental fac tors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles {like reinforced steel walls) between the earbuds and your device .

The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in Warranty & Customer SUPP rt.

I put the earbuds back in the charging ca se , but the earbuds are still connected
The charging case is probably out of power r. Try charging it.

Product Care & Use

• Keep away from liquids and extreme heat
• Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number

mason US orders: support.us@oukey.com
Amazon EU orders:support.eu@oukey.com
Amazon CA orders:support.ca@oukey.com
Amazon JP orders:support.jp@aukey.com

*Please note. AUKEY can on lee provide after sales se vice for products purchased direct lee for m AUKEY. If you have purchased from a different seller. please contact them directly for service or warranty issues

CE Statement

Mox RF power level:
BT classic (2402-2480MHz): 2.1dBm
RF exposure assessment hos been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).

CAUTIO N: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Excessive sound pressure from earphones and headphones  can  cause  hearing loss

Hereby, Aukey Technology Co ., lt d. declares that the radio equipment type (True Wireless Earbuds, EP-T27) is in compliance with Directive 2014/53/EU.

Notice: Th is device may be used in each member st ate of the EU.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>