ORNO OR-AE-1347 Disappearing Table Power 3X250 V AC Instruction Manual

: June 5, 2024
: ORNO

Table of Contents

Operating Instruction
INSTALLATION
TECHNICAL DATA
DESCRIPTION/MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Desktop extension socket with USB charter and clam’s holder

Operating Instruction

**** Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures, and components in the equipment. On the other hand, used equipment is valuable material from which we can recover raw materials such as copper, tin, glass, iron, and others. The weee sign placed on the equipment, packaging, or documents attached to it indicates the need for selective collection of waste electrical and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005.1t is the responsibility of the user to hand the used equipment to a designated collection point for proper processing. Used equipment can also be handed over to the seller if one buys a new product in an amount not greater than the newly purchased equipment of the same type. Information on the available collection system of waste electrical equipment can be found in the information desk of the store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for the environment and human health!

INSTALLATION

Before installing the device, drill a hole in the surface of a table or a desk. (1).
Once the hole is prepared, turn the mounting ring left and remove it.
Put the power wire and the body of the socket inside the hole (2).
Put the mounting ring through the power wire, and tighten it up to the body of the socket and underneath the desk or table (3).
Connect the power wire to the socket.

SAFETY NOTES

Before connecting and using the device, read this Operating Manual and keep it for future reference. In case something written herein is unclear, please contact the seller. The manufacturer is not responsible for any damage that can result from improper device installation or operation. Any repair or modification carried out by yourselves results in loss of guarantee. In view of the fact that the technical data are subject to continuous modifications, the manufacturer reserves a right to make changes to the product characteristics and to introduce different constructional solutions without deterioration of the product parameters or functional quality. Additional information about ORNO products are available at www.orno.pl. Orno-Logistic Sp. z o.o. holds no responsibility for the results of non-compliance with the provisions of the present Manual. Orno Logistic Sp. z o.o. reserves the right to make changes to the Manual – the latest version of the Manual can be downloaded from support.orno.pl. Any translation/interpretation rights and copyright in relation to this Manual are reserved.

Disconnect the power supply before any activities on the product.
Do not immerse the device in water or other fluids.
Do not operate the device when its housing or wire is damaged.
Do not repair it by yourselves.
Do not use the device contrary to its original purpose.
Suitable for indoor use only.
Keep out of reach of children.
Avoid contact with water and other electric conductors (e.g. metals).

Before you plug in the device, please make sure that the electric circuit parameters comply with its technical specification. In case of wire damage, safely unplug it straight off. Do not use the device when its wire is damaged. It should be replaced by a professional electrician.

TECHNICAL DATA

Power source: 230V-, 50 Hz
Protection level: IP 20
typ gniazd: French (typ E) lub Schuko (type F). Max. current: 16A
Max. rated load: 3680W
Cable type: HO5W-F 3×1,5mm2
Cable length: 1,8m

Model| Diameter of mounting
hole (mm):| Material:| No. of
USB ports:| USB
outputs:| Additional
information:| Socket
type| Net
weight:
---|---|---|---|---|---|---|---
OR-AE-1347| 60| plastic painted metal| | | blockage| E| 0,6 kg
OR-AE-1348| 60| plastidINOX| | | blockage
OR-AE-1349| 60| plastic/painted metal| 2| 5VDC, 2.1A| blockage| E| 0,65 kg
OR-AE-1350| 60| plastic/INOX| 2| 5VDC, 2.1A| blockage
OR-AE-1355| 80| plastic painted metal| | | | E| 0,65 kg
OR-AE-1356| 80| plasticlINOX| | |
OR-AE-1357| 80| plastic painted metal| 2| 5VDC, 2.1A| | E| 0,7 kg
OR-AE-1358| 80| plastic/INOX| 2| 5VDC, 2.1A|
OR-AE-1351| 100| plastic painted metal| | | | E| 1 kg
OR-AE-1352| 100| plastic/INOX| | |
OR-AE-1353| 100| plastic painted metal| 2| 5VDC, 2.1A| | E| 1,1 kg
OR-AE-1354| 100| plastidINOX| 2| 5VDC, 2.1A|
OR-AE-1347(GS)| 60| plastic painted metal| | | blockage| F| 1 kg
OR-AE-1348(GS)| 60| plastic/INOX| | | blockage
OR-AE-1349(GS)| 60| plastic painted metal| 2| 5VDC, 2.1A| blockage

DESCRIPTION/MAINTENANCE

This device is suitable for indoor installation, inside standard desk/table holes. Any maintenance shall be carried out after the power source has been switched off. Clean with dry cloths only. Do not use chemical cleansers. This product has a grounding pin and current circuit protection.