BORMANN BRL8000 10W Rechargeable LED User Manual
- June 3, 2024
- BORMANN
Table of Contents
BORMANN BRL8000 10W Rechargeable LED
Box Contents
- 1x10W Rechargeable LED Work light
- 1X USB Charging Cable
- Operating Voltage: AC100-240 V adaptor. 2X 3.7 V 2200maH (18650)
Charging:
- Connect the cable provide to the USB charging input on the back of the work light.
- Connect the USB plug to a USB mains power adaptor or a USB charging port on a computer.
- Charging will take between 5 and 10 hours depending on if you’re using a 5V 1A power supply or a computer USB port which is only 500mA.
- When the product is charging the red light flashing, then it stops flashing the charge is over, you can now disconnect the USB charging cable.
- The product can use 2pcs 18650 Li-ion batteries or 4pcs AA dry batteries.
Modes
Press the power/mode button to use each of modes on the work light. High light – low light –flash-off.
Safety
- Place the LED work light in a well ventilated area and keep distance of at least 0.5m if placed near a wall.
- Do not open the equipment or touch any of its internal parts.
- Do not expose charging input socket or cable to water or any other liquids.
| Technical Data | |
|---|---|
| Led type: | 10W COB LUMEN:700-800LM |
| Switch modes: | 100% ON->50% ON->FLASH>OFF |
| Battery: | Lithium 4400MAH |
| Charging time: | 5h |
| Light time: | 3.5h |
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Read User Manual Online (PDF format)
Loading......