novasina nLink+ MR IP And EC Humidity Measurement Analog Signal Transmitter User Guide
- June 15, 2024
- Novasina
Table of Contents
novasina nLink+ MR IP And EC Humidity Measurement Analog Signal
Transmitter
Product Information
Specifications
- Transmitter Model : nLink+ MR
- Interface : RS485
- Manufacturer : Novasina AG
- Address : Neuheimstrasse 12, 8853 Lachen, Switzerland
- Telephone : +41 55 642 67 67
- Fax : +41 55 642 67 70
- Email : sales@novasina.ch
- Website : www.novasina.com
**Description
**
The nLink+ MR transmitter is a reliable device designed to work with nSens probes that provide an RS485 interface. This transmitter has undergone quality assurance testing and can be used straight out of the box.
Product Usage Instructions
Quick Guide for nLink+ MR EC
- Connect the 3-wire nSens cable to the corresponding terminal (nBus-P) based on the provided color coding.
Quick Guide for nLink+ MR IP
- The nSens probe can be connected directly to the transmitter.
- Alternatively, you can use an extension cable for flexible installation.
Configuration
To change the settings of the nLink+ MR transmitter, follow these steps:
- Use the nlink-USB cable (Art-No 2601818) to connect the transmitter to your computer.
- Download and install the configuration software nSoft-ACT-T.
- Open the nSoft-ACT-T software and make the desired changes to the settings.
Note : For detailed instructions and safe handling, please refer to the instruction manual available on our website.
Thank you for buying the nlink+ MR transmitter. You obtained a reliable transmitter for your nSens probes providing an RS485 interface. As the transmitters have passed quality assurance testing you can use them out of the box.
Read the instruction manual (available on the website) for detailed instructions and safe handling
Quick Guide
-
nLink+ MR EC:
Connect the 3-wire nSens cable to the corresponding terminal (nBus-P) according to the colour coding. -
nLink+ MR IP:
The nSens can be connected directly to the transmitter or use an extension cable for flexible installation.
Configuration
Use link-USB cable (Art-No 2601818) and configuration software nSoft-ACT-T to change these settings anytime.
Technical information and other information are subject to change without notice For further information, please get in touch with your sales representative. Check our website www.novasina.ch for the instruction manual, software download, and distributor contact information.
FAQ’s
Where can I find the instruction manual, software download, and distributor contact information?
You can find the instruction manual, software download, and distributor contact information on our website at www.novasina.ch.
How can I get further information or assistance?
Please get in touch with your sales representative for further information or assistance.
References
- Novasina AG - water activity measurement and climate data
- Novasina AG - water activity measurement and climate data
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>