bluebuilt Premium Stacking Kit User Guide
- June 3, 2024
- bluebuilt
Table of Contents
bluebuilt Premium Stacking Kit
In the box
- Stacking kit,
- strap,
- strap tensioner,
- anti-slip components (8x),
- plastic protective cover.
Your own tools
Spirit level.
CHECKLIST
You’re 50% there.
Placing it level.
Make sure the washing machine is level before placing the stacking kit.
Worktop load capacity.
The worktop is only suitable for a maximum weight of 10 kilograms.
Follow all instructions as described here and only use the included tools. Only use the worktop for your laundry basket or to fold your laundry. If you fail to do so, the warranty will be voided and Coolable won’t be liable. That would be a waste of your purchase.
-
Stick four of the the anti-slip components 4 on the bottom of the stacking kit.
Samsung washing machine? Push them against the outer edge. Turn the stacking kit over and place it on the middle of the washing machine. -
Roll out the strap 2 and make sure the lever of the strap tensioner 3 is pointing outwards.
Pull the strap down through the slot on the right side of the stacking kit 1 . -
Pull the strap 2 underneath the washing machine, keeping it straight in the middle.
Next, pull the strap up through the slot on the left side of the stacking kit 1 . Leave the strap hanging for now. -
Apply 4 of the anti-slip components 4 onto the corners of the stacking kit. Next, place your dryer in the middle of the stacking kit.
-
Tighten the strap 2 around the top or side of your dryer as follows:
Open the strap tensioner 3 and pull the strap through the middle slot. Next, pull the strap all the way through the strap tensioner. -
Pull the strap 2 and tighten it around your washing machine and dryer until it’s fixed in place. Do this by pulling the lever of the strap tensioner 3 up and down.
Finally, place the plastic protective cover 5 on top of the strap tensioner.