BlueBuilt 935446 Adjustable Stand For Sonos Installation Guide
- June 1, 2024
- bluebuilt
Table of Contents
BlueBuilt 935446 Adjustable Stand For Sonos
In the box
- Ground plate
- Tube
- Mounting plate
- Speaker stand
- Spikes
- Stands
- Screws
- Bolts
From your own toolbox
- 9 Hex key 1.5mm
- 10 Hex key 3mm
- 11 Cross-head screwdrivers
CHECKLIST.
Does the tick.
- Suitable surfaces : J All floors
- Horizontal setup: Make sure that the speaker stand is at spirit level. This improves the sound quality of the speaker.
- Load: Use the stand only for speakers with a maximum weight of 3kg.
- Do you have a question? Coolblue.nl/en/customer-service
Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation.
ASSEMBLY INSTRUCTION
-
STEP 1.
Tighten the stands 6 at the bottom of the ground plate 1 . Installing your stand on carpet? Use the spikes 5 . -
STEP 2.
Attach the tube 2 with the slit to the back with the bolts 8 and the included hex key 10 to the ground plate 1 . -
STEP 3.
Take out the bottom screw from the tube 2 . You don’t have to place it back and can throw it away. Loosen the upper 2 screws into the tube 2 with the hex key 9 to adjust the tube in height. Tighten the 2 screws again when you’ve reached the desired height.
-
STEP 4.
Place the mounting plate 3 on the tube and tighten the screws 7 . -
STEP 5.
Attach the speaker stand 4 with the screws. -
STEP 6.
Attach the speaker with screws to the speaker mount. Feed the cable through the gutter at the back of the tube. Place the installed speaker and speaker stand in the desired spot.
