bluebuilt Era 100 Adjustable Stand for Sonos User Guide

Blue-built Era 100 Adjustable Stand for Sonos

INSTALL SPEAKER STAND

In the box

1. Ground plate

2. Tube

3. Mounting plate

4. Speaker Stand

5. Spikes

6. Stands

7. Screws

8. Bolts
   From your toolbox

9. Hex key 1.5mm

10. Hex key 3mm

11. Cross-head screwdrivers

CHECKLIST

Suitable surfaces
All floors

Horizontal setup
Make sure that the speaker stand is at the spirit level. This improves the sound quality of the speaker.

Load
Use the stand only for speakers with a maximum weight of 3kg.

Do you have a question?
Coolblue.nl/en/customer-service
Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation.

STEP 1
Tighten the screws of the stands. Tighten stand 6 at the bottom of the ground plate 1 . Installing your stand on the carpet? Use the spikes 5.

STEP 2
Attach tube 2 with the slit to the back with the bolts 8 and the included hex key 10 to the ground plate 1.

STEP 3
Adjust the tube in height. Take out the bottom screw from the tube 2. You don’t have to place it back and can throw it away. Loosen the upper 2 screws into the tube 2 with the hex key 9 to adjust the tube in height. Tighten the 2 screws again when you’ve reached the desired height.

STEP 4
Place the mounting plate Place mounting plate 3 on the tube and tighten the screws 7.

STEP 5
Attach the speaker stand Attach the speaker stand 4 with the screws.

STEP 6
Attach the speaker. Attach the speaker with screws to the speaker mount. Feed the cable through the gutter at the back of the tube. Place the installed speaker and speaker stand in the desired spot.

BlueBuilt is a registered trademark of Coolbue B.V.
Weena 664, 3012 CN Rotterdam, The Netherland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>