SYNCO WAir G1T Digital Wireless Microphone User Manual

June 9, 2024
SYNCO

WAir G1T Digital Wireless Microphone
User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Caring For Your SYNCO Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanical damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, impact of external force.
  • Do not attempt to disassemble the product. Doing so voids warranty.
  • Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  • Failure to follow all the instructions may result in mechanical damage.
  • Warranty does not apply to human errors.

Package List

Product Instruction

TX Transmitter

  1. External Mic Input
  2. USB-C Port
  3. Power/Mute
  4. Reset (Help with Eject Pin)
  5. Low Cut
  6. Pairing
  7. Built-in Mic
  8. Pocket Clip
  9. Pairing/Muting Indicator
  10. Power Indicator

RX Receiver

  1. Vocal Effects
  2. Pairing/Gain Control
  3. USB-C Port
  4. Detachable Connector
  5. 3.5mm In-Ear Monitoring Jack
  6. Pairing Indicator

Indicator – TX Transmitter

| Pairing/Muting Indicator| Power Indicator
---|---|---
| | |
Slow flashes| System unpaired| |
Fast Flashes| System pairing| |
Keeps on| System paired| Muting| 1. Low battery
2. Charging, and is off after fully
charged
Fast flashes twice Low cut on| | |

Indicator – RX Receiver

Pairing Indicator

| |
Slow flashes| System unpaired| /
Fast flashes| System pairing| /
Keeps on| System paired| Vocal effects on

Operations

TX

  1. Power/Mute
    Long press 3s: turn on/off the system
    Short Press: mute/unmute the microphone

  2. Charging 5V/2A Please fully charge the product before use with USB-C charging cable.

  3. External Mic Input TRS Mic Only
    (Note: When using an external mic, please insert it into the mic input properly.)

  4. Mic Windshield & Device Installation

  5. Reset

  6. Low Cut Short Press: 150Hz Low Cut On
    Short Press again: Low Cut Off

  7. Pairing

The system will pair automatically after power on. Manual pairing: long press the pairing button on the TX and RX for 3 seconds. RX

  1. Vocal Effects
    Short press to switch sound effects: Original – Studio FX – KTV FX – Voice Amplification – EDM (Electronic Dance Music) – Baby FX – Male to Female – Female to Male – Monster FX

  2. Pairing/Gain Control
    The system will pair automatically after power on. Manual pairing: long press the pairing button on the TX and RX for 3 seconds. Gain Control: 0-3 level
    Each short press increase gain by one level.

  3. USB-C Port
    For charging phone device.

  4. Detachable Connector
    G1T: Type-C connector
    G1L: Lighting connector
    Extra Type-C or Lighting connector is available separately to adapt RX to more phone devices.

5.3.5mm In-Ear Monitoring Jack
For real-time monitoring mic recording and device’s backgrounding with headphones.

Specifications

TX Transmitter

Wireless Transmission Digital 2.4Ghz
RF Frequency Band 2400-2483.5MHz
Working Distance 492ft/150m(LOS area)

164ft/50m(NLOS area)
Sampling Rate| 48KHz
Bit Depth| 16Bit
SNR| > 75dB
Audio Input| 18/” / 3.5mm TRS Mic Input
RD Output Power| 20dB
Power Requirements| 3.3V-4.7V
Battery Type| Built-in Lithium Battery, 400mAh
Charging Port| USB-C
Battery Charging Time| 1.5H
Battery Life| 8H
Dimensions| 52 x 42 x 16mm
Material| ABS
Weight| 35g

RX Receiver

Wireless Transmission Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Working Distance 492ft/150m(LOS area)

164ft/50m (NLOS area)
Sampling Rate| 48KHz
Bit Depth| 16Bit
Antenna| Built-in
Number of Audio Channels| 2
Monitoring| 3.5mm In-Ear Monitoring
Audio Output| Lighting or Type-C Output
Gain| 0-3 Level
Power Requirements| 5V A1
Dimensions| 55x31x13mm
Material| ABS
Weight| 12g

Microphone

Form Factor Built-in Mic
Sound Field Mono
Polar Pattern Omnidirectional
Frequency Range 50Hz-20KHz
Sensitivity -42dB (±3dB, re 1V/Pa at 1KHz)
Maximum SPL 110dB SPL (at 1KHz)

Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440
Subject of the declaration:
Title: Wireless system
Model / Type: Synco G1T & G1L
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals