bluebuilt Era 300 Wall Mount for Sonos User Guide
- June 1, 2024
- bluebuilt
Table of Contents
bluebuilt Era 300 Wall Mount for Sonos
Product Information
Specifications:
- Product Name: Wall Mount for Sonos Era 300
- Model Number: 935444 – BBWMSE300W
- Version: V1.0
- Time Required for Installation: 30 minutes
- Recommended Number of Persons: 1
Product Usage Instructions
Installation Steps:
- Place the Speaker: Position the speaker on the speaker stand.
- Mark the Height: Use a spirit level to determine and mark the correct height on the wall mount.
- Drill Holes: Depending on the wall type:
- For wooden walls: Drill 3.5mm wide and 50mm deep holes and attach the wall mount using screws.
- For stone walls: Drill 8mm wide and 50mm deep holes, insert plugs around screws, and attach the wall mount.
- Attach the Speaker: Connect the speaker stand to the wall mount and manage cables with the provided zip tie.
- Adjust the Speaker: Tilt or move the speaker to customize sound direction according to your preference.
FAQ:
Can I install this product by myself?
We recommend following the provided installation instructions carefully. If
you are unsure or uncomfortable, it’s advisable to seek assistance from a
professional installer to avoid any potential issues.
Where can I find additional support or assistance?
You can visit Coolblue’s customer service page at Coolblue.nl/en/customer-
service for further help or contact a
professional installer for expert guidance.
What should I do if I encounter difficulties during installation?
If you face any challenges or have questions, feel free to reach out to our
customer service team at Coolblue.nl/en/customer-
service for prompt assistance and
solutions.
Wall Mount for Sonos Era 300
INSTALL SPEAKER STAND
On a high note.
In the box:
-
Wall mount
-
Speaker stand
-
Zip tie velcro
-
Plugs
-
Screws
From your own toolbox: -
Cross-head screwdrivers
-
Pencil
-
Spirit level
-
Drill
CHECKLIST.
Does the tick.
Suitable surfaces:
- Wood
- Drywall
- Concrete
- Brick
Do you have a question?
Coolblue.nl/en/customer-service
Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation. Not sure if you can do this yourself? Ask a professional installer.
INSTRUCTION
STEP 1.
Place the speaker.
Place the speaker on the speaker stand 2 and tighten the screws at the bottom.
Feed the cable through the hole in the speaker stand.
STEP 2.
Mark the height.
With the spirit level, measure the height of the wall mount 1 . Make sure that
it’s straight. Mark the drill holes with the pencil.
STEP 3.
Mark the height.
- Wooden wall: drill a 3.5mm wide and 50mm deep whole and screw the wall mount 1 with the screws 5 to the wall.
- Stone wall: drill a 8mm wide and 50mm deep hole. Place the plugs 4 around the screws 5 and screw the wall mount 1 to the wall.
STEP 4.
Attach the speaker.
Attach the speaker stand 2 to the wall mount 1 and optionally store away the
cables with the zip tie 3 .
STEP 5.
Adjust the speaker.
Tilt the speaker upwards or downwards or move it from the left to the right to
adjust the sound to your liking.
BACKSIDE.
Turn over for use.
BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>