OKM Fusion Professional Ground Scanner User Guide
- June 3, 2024
- OKM
Table of Contents
Fusion Professional Ground Scanner
User Guide
ASSEMBLY
Plug Charger into Control Unit to check charge status (fully charged = LED off) and recharge batteries (LED on).
Hold Probe in your hand and power it on.
Install software, setup Bluetooth and connect notebook with Probe
(see DATA TRANSFER).
Operation via Trigger on the Probe or in the software Visualizer 3D Studio on the notebook.
OPERATING MODES
LIVE SOUND
Acoustic and visual magnetic field measurement to detect metal objects near the surface.
3D GROUND SCAN
BETRIEBSAR
Graphical ground measurement with visualization in 3D for detailed analysis on
the notebook.
FIRST MEASUREMENT
- Open Visualizer 3D Studio, start import and configure 3D Ground Scan:
- Field Length: 20 m
- Scan Mode: Parallel
- Probe Orientation: Vertical
Start at bottom right of the scan field.
- Press the Trigger Button at the probe or in Visualizer 3D Studio to start scanning.
- Scan the line. The measurement of the line will end automatically.
Repeat this procedure to measure further scan lines.
Finish the scan by pressing and save the scan on the notebook .
Walk all scan lines at the same speed. Keep the probe straight and avoid
pivoting or swinging.
DATA TRANSFER
- Download Visualizer 3D Studio or plug USB flash drive into notebook.
- Start Setup.exe (Installation).
- Follow the installation instructions on the screen.
- Open the installed software Visualizer 3D Studio.
- Get Activation Code (valid Software Key required) and enter it.
- Pair Bluetooth: Settings Devices Add Bluetooth …
- … select Bluetooth and pair device (OKM Fusion Professional).
- Open Visualizer 3D Studio and start Import:
- Select Fusion Professional (version 2.0 or higher) and enter scan parameters in the dialog windows.
- Perform measurement with Fusion Professional. After finishing, save file on notebook
SOFTWARE INSTALLATION
AKTIVIERUNGSCODE HIER:
GET ACTIVATION CODE:
www.okmdetectors.com/software-activation
+49 3447 499 300 0
SOFTWARE ACTIVATION
WEITERE INFOS & SUPPORT
FURTHER INFORMATION & SUPPORT
| USER MANUAL
WWW.OKMDETECTORS.COM/DOWNLOADS
---|---
| 3D GROUND SCAN GUIDE
WWW.OKMDETECTORS.COM/GROUND-SCAN-GUIDE
| VIDEOS & TUTORIALS
WWW.OKMDETECTORS.COM/TUTORIALS
| SUPPORT
For further questions please contact your dealer or directly OKM GmbH in
Germany.
OKM GmbH | Julius-Zinkeisen-Str. 7 | 04600 Altenburg | Germany
+49 3447 499 300 0 | info@okmdetectors.com
WWW.OKMDETECTORS.COM
References
- Downloads – OKM Detectors
- How to Achieve Best 3D Scan Images – OKM Detectors
- Software Activation – OKM Detectors
- Videos / Tutorials – OKM Detectors
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>