OKM Fusion Professional Plus Detector User Guide

OKM Fusion Professional Plus Detector

ASSEMBLY

1. Plug Charger into Control Unit to check charge status (fully charged = LED off) and recharge batteries (LED on).
2. Power on Probe. Hold Probe vertically in your hand OR clamp Probe horizontally to Telescopic Rod.
3. Install software, setup Bluetooth and connect notebook with Probe (see DATA TRANSFER).
4. Probe vertical: Operation via Probe or notebook.
5. Probe horizontal: Operation only via notebook.

OPERATING MODES

LIVE SOUND

Acoustic and visual magnetic field measurement to detect metal objects near the surface.

3D GROUND SCAN

Ground measurement with 3D visualization for detailed analysis on the notebook. Probe vertical or horizontal.

LIVE SCAN (horizontal)

Fast detection of objects in random scan direction (scan can not be saved). Probe in horizontal orientation.

LIVE SCAN (vertical)

Fast detection of anomalies in random scan direction (scan can not be saved). Probe in vertical orientation.

FIRST MEASUREMENT

Open Visualizer 3D Studio, start import and configure 3D Ground Scan:

• Field Length: 20 m
• Scan Mode: Parallel
• Probe Orientation: Vertical
• Search Coil: Yes

Start at bottom right of the scan field.

• Press the Trigger Button at the probe or in Visualizer 3D Studio to start scanning.

• Scan the line. The measurement of the line will end automatically.

• Repeat this procedure to measure further scan lines.

• Finish the scan by pressing and save the scan on the notebook .

Walk all scan lines at the same speed. Keep the probe straight and avoid pivoting or swinging.

DATA TRANSFER

SOFTWARE INSTALLATION

1. Download Visualizer 3D Studio or plug USB flash drive into notebook.
2. Setup.exe starten (Installation).
3. Follow the installation instructions on the screen.
4. Open the installed software Visualizer 3D Studio.

SOFTWARE ACTIVATION

1. Get Activation Code (valid Software Key required) and enter it.
2. Pair Bluetooth: Settings Devices + Add Bluetooth …
3. select Bluetooth and pair device (OKM Fusion Professional Plus).

DATA TRANSFER

1. Open Visualizer 3D Studio and start Import:
2. Select Fusion Professional Plus (version 2.0 or higher) and enter scan parameters in dialogs .
3. Perform measurement with Fusion Professional Plus. After finishing, save file on notebook .

FURTHER INFORMATION & SUPPORT

• USER MANUAL:WWW.OKMDETECTORS.COM/DOWNLOADS
• 3D GROUND SCAN GUIDE:WWW.OKMDETECTORS.COM/GROUND-SCAN-GUIDE
• VIDEOS & TUTORIALS:  WWW.OKMDETECTORS.COM/TUTORIALS

SUPPORT

For further questions please contact your dealer or directly OKM GmbH in Germany.

OKM GmbH

• Julius-Zinkeisen-Str. 7 04600 Altenburg Germany
• +49 3447 499 300 0
• info@okmdetectors.com

www.OKMDETECTORS.COM

References

• Downloads – OKM Detectors
• How to Achieve Best 3D Scan Images – OKM Detectors
• Software Activation – OKM Detectors
• Videos / Tutorials – OKM Detectors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>