OKM GeoSeeker Water and Cavity Detector User Guide
- June 4, 2024
- OKM
Table of Contents
OKM GeoSeeker Water and Cavity Detector
ACTIVE SCAN (Accurate)
Very precise measurement – Most time consuming.
AKTIVE MESSUNG (Schnell)
ACTIVE SCAN (Quick
Quick measurement – Less accurate and with limited depth and
dimensions, less time consuming.
PASSIVE SCAN Use full if you expect floating water in the underground.
Recommended for very sloping terrain.
SCAN PROFILES
COMPLETE MEASUREMENT
Measurement of a rectangular field
SINGLE MEASUREMENT
Measurement of a single point only
LENGTHWISE MEASUREMENT
Scan of a single line (lengthwise).
CROSSWISE MEASUREMENT
Scan of a single line (crosswise
Connect Tablet and Controller via WLAN. Start GeoSeeker App, New Measurement and enter a project title.
Choose Scan Mode and Scan Profile:
We recommend Active Scan (Accurate) and Complete Measurement
Set the Depth Range (start and end depth), Resolution (distance between the scan points) and Field Dimensions (length and width
-
. Prepare scan field: Determine width and lengthand set single scan points .
-
Power Box und Controller Place Power Box and Controller at the first scan point and switch on both.
-
GeoSeeker App starten und Messung konfigurieren: ACTIVE Messing (Exact). Start Geo Seeker App an Configure Scan: Active Scan (Accurate).
-
Prepare Scan for the left and right side by placing Cable Drums and Electrodes.
-
Place the Power Box at the current scan point, open it and unfold antenna
-
Connect the Power Drums (red plugs/sockets).
-
Unroll Power Drums until you reach the cable markers (see App).
-
Place Power Electrodes and connect with Cable Drum via Extension cable.
-
Place the Controller at the scan point 1 m (3 ft) in front of the Power Box.
-
Unroll the Voltage Drum cables completely.
-
Make a U-turn and return the cable ends to its markers (see App).
-
Place and connect the Voltage Electrodes (black plugs/sockets).
Place the Cable Drums and Electrodes left and right of the current scan point: FOLLOW APP INSTRUCTIONS!
FURTHER INFORMATION & SUPPORT
USER MANUAL
www.okmdetectors.com/downloads
VIDEOS & TUTORIALS
www.okmdetectors.com/geoseeker-videos
SUPPORT
For further questions please contact your dealer or directly OKM GmbH in Germany