SERVICE FIRST Orion Series 6 Inch Adjustable Wall Mount Flagpole Instruction Manual
- June 3, 2024
- SERVICE FIRST
Table of Contents
SERVICE FIRST Orion Series 6 Inch Adjustable Wall Mount Flagpole
Veteran owned & Operated
Service First is owned and operated by Parker McCumber, an OEF Veteran, who
served with the 2nd Cavalry Regiment and 1st Cavalry Division as a Forward
Observer and Fire Support Section Chief. Parker has also served several years
in the Utah National Guard as a Targeting NCO, and is continuing his service
and transitioning to officership with the Utah National Guard. We know the
sacrifice service members make, and recognize their contributions to our great
nation as we pay respect to our flag and all it represents. “I believe every
American should be able to fly our nation’s flag proudly, and the mission of
ServiceFirstProducts.com is to make it easy and affordable for everyone to
have a beautiful flagpole in their yard and at their home.”
-Parker McCumber
PARTS
Parts List
The New 6’ Orion Wall Mount Flagpole is built from the highest quality materials. 1.5” diameter aluminum pole, stainless steel flag clips, High strength 180 degree adjustable mount and includes our premium 3‘x5’ sewn and embroidered USA flag. The Orion also carries our double-sided “Honoring Our Veterans” Badging. It is the perfect accessory to every home.
INSTRUCTIONS
Installing your Flagpole A complete installation video is available at www.ServiceFirstProducts.com.
-
Chose the location you wish to install your Flagpole. Make sure the installation location is sturdy and can support the weight and stress of a flagpole .
-
Using the Flagpole Mount (C) as a template mark the location of the 4 screws using a pencil. Use a level if necessary to make sure the mount is perfectly vertical. Depending on the material you are installing on, decide whether using anchors are necessary. Your kit includes basic expansion anchors, however these may not be appropriate depending on the surface you are installing the flagpole on. For individual installation questions and different anchor options please visit your local hardware store or consult a professional.
-
Choose the proper hardware for the material you are installing on and secure mount to the surface.
-
Build your flagpole..
Connect Sections (A) and (B). Use screw (D) to secure the pieces together
- Install Flag Clips (F) to the swivels on the pole. Install the Gold Finial (E) to the top of your pole. Your Orion Flagpole comes with a sewn & embroidered 3×5 USA Flag (G). Clip this Flag to the pole using the Flag Clips (F).
- Use the Flag Size Adjuster to hold the bottom of the 3×5’ Flag in place. Different Flags will have slightly different dimensions. The Size adjuster will allow you to compensate for these variables. IMPORTANT Do not set the Adjuster position too snug. If the flag is too tight it will not swivel properly and the flag will tangle. If you find your flag tangling occasionally, loosen the Flag Size Adjuster slightly.
- Take your completed Orion flagpole and slip it into your previously installed mount (C). Adjust the angle of the mount as preferred. Tighten the set screw on the side of the flagpole mount to keep the flagpole in place.
OPTIONAL SOLAR LIGHT
Light your Flag correctly with our new Solar Light designed exclusively for your Orion Wall Mount Flagpole.
Available now at www.ServiceFirstProducts.com
Other Flagpole Accessories Available
T: 385-985-7244
e: Contact@weareservicefirst.com
Designed in the USA, Made in P.R.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>