SERVICE FIRST Dream Flagpole Christmas Tree Light Instruction Manual

June 10, 2024
SERVICE FIRST

SERVICE FIRST Dream Flagpole Christmas Tree Light Instruction Manual

SERVICE FIRST Dream Flagpole Christmas Tree Light

SERVICE FIRST

Veteran owned & Operated

Service First is owned and operated by Parker McCumber, an OEF Veteran, who served with the 2nd Cavalry Regiment and 1st Cavalry Division as a Forward Observer and Fire Support Section Chief.

Parker has also served several years in the Utah National Guard as a Targeting NCO, and is continuing his service and transitioning to officership with the Utah National Guard. We know the sacrifice service members make, and recognize their contributions to our great nation as we pay respect to our flag and all it represents.

“I believe every American should be able to fly our nation’s flag proudly, and the mission of ServiceFirstProducts.com is to make it easy and affordable for everyone to have a beautiful flagpole in their yard and at their home.”

-Parker McCumber

ServiceFirstProducts.com

PARTS

FIG 3 PARTS

INSTRUCTIONS

Installing your Dream light

A complete installation video is available at www.ServiceFirstProducts.com.

FIG 4 Installing your Dream light

FIG 5 Installing your Dream light

FIG 6 Installing your Dream light

ARRANGING LIGHTS

The Dream lights are designed to fit flagpoles up to 30’ tall. If they are installed on a flagpole shorter than 30’, there will be some of the strand left on the ground. The extra length can be bundled on the ground, arranged as a base around the pole or cut to a shorter length. More information on cutting the strand can be found on next page.

Here are a few ways you can arrange the extra strand length with your flagpole if you choose not to trim your Dream lights.

Examples:

FIG 7 ARRANGING LIGHTS

TRIMMING LIGHTS

As explained previously, when the kit arrives the strand length is set to fit a 30’ Flagpole. You can use the lights at this length with any size flagpole and arrange any extra length of the strand as you choose. Or if you prefer the exact strand length for your size flagpole, you can trim the light strand to length. Please be very cautious when trimming the lights. Once they are cut they cannot be reconnected.

FIG 8 TRIMMING LIGHTS

MODE CONTROL

FIG 9 MODE CONTROL

  • Press Once- LED on controller will flash Red 3 times and the lights will stay lit for 4 hours and then remain off for 20 hours before turning on again.
  • Press Twice LED on controller will flash Green 3 times and the lights will stay lit for 6 hours and then remain off for 18 hours before turning on again.
  • Press 3x- LED on controller will flash White 3 times and this will CANCEL all timers previously set. You will then need to turn on/off the lights manually.

**If the Dream lights lose or are disconnected from power the timer will need to be restarted.

REMOTE CONTROL PAIRING

When your Dream lights arrive your remote should already be paired to the receiver. Occasionally the remote will need to be reconnected (paired) to the receiver again. If your remote is having trouble communicating with the receiver, try to pair the remote again.

FIG 10 REMOTE CONTROL PAIRING

INSTALLATION TIPS

****When unboxing the Dream lights for the first time, exercise extreme caution while removing the lights and accessories from the protective shipping wrap. The dream lights have been carefully packed to avoid damage during shipping. Use caution when removing the packaging to avoid damaging the lights.

Once you have the distributor installed on your flagpole and you are beginning to unwind the light strands, Use masking tape to hold the individual strands in place until all the strands are unwound and you are ready to stake them to the ground. This will keep the strands from getting tangled as you raise your flagpole.

Storing tips: Be extremely cautious when removing your Dream light system from your flagpole. Wind each strand carefully and use included velcro straps to hold together. Insure the lights and all parts are completely dried. Package safely in the included storage case and store in dry location.

Replacement Parts: Each light strand is connected separately from the distributor. If for some reason an individual light or light strand is malfunctioning it can easily be replaced.

For replacement light strands and other parts, please contact Service First.

INSTRUCTIONS

FIG 12 INSTRUCTIONS

Multiple Patents Pending

www.ServiceFirstProducts.com

e: Contact@weareservicefirst.com

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals