SERVICE FIRST 3043 Bird Platform and Feeders Instructions
- June 15, 2024
- SERVICE FIRST
Table of Contents
Flagpole Bird
Platform and Feeders
3043 Bird Platform and Feeders
The Service First Bird Platform and Feeders are designed to fit most flagpoles
up to 30’ in height. This universal Bird feeder adds beauty and liveliness to
any yard and is a great addition to your flagpole. 
Installation instructions:
The Service First Flagpole Bird Platform works with most telescoping or sectional flagpoles. Installation may vary based on the flagpole type and size.
Step 1
For a telescoping flagpole, lower the flagpole to allow access to your desired
install height.
For a sectional flagpole carefully use a ladder
to gain access to the desired height that you wish to install. For 20’ or 25’
Service First flagpoles we suggest installing the Platform on the 2nd or 3rd
sections of the flagpole. For a Service First 30’ sectional flagpole, the
platform will need to be installed on the 3 section. For 2” diameter
flagpoles, the kit includes a rubber spacer to achieve a secure fit.
Step 2
Run the included hose clamps through the Platform and around the flagpole.
Insert the rear support and adjust it so it sits evenly on the flagpole.
Step 3
Hand-tighten the platform to the flagpole ensuring it is level and
stable.
Step 4
Using the included carabiners, attach the Bird Feeder and Water House to the
Platform on opposite sides. 
Note: The Platform has multiple holes,
allowing flexibility in the placement of the feeders or the addition of other
accessories.
Step 5
Fill the feeder with seed and the Water House with water. You can also spread
feed on the platform’s surface if desired. 
Parts
www.ServiceFirstProducts.com
e: Contact@weareservicefirst.com
Designed in the USA
Made in P.R.C.
T: 385-985-7244
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>