BRETFORD TVCT30CAD-AW Cube Transport Cart with Caddies User Guide
- June 3, 2024
- BRETFORD
Table of Contents
BRETFORD TVCT30CAD-AW Cube Transport Cart with Caddies
About Your Product
Product Overview – Front View
The CUBE Transport with Caddies provides charging, mobility, and distribution
for up to 30 devices.
Technical Specifications
CUBE Transport Cart 30 with Caddies | |
---|---|
Model(s) | TVCT30CAD-xx, HPYB2VC/A |
Outer Dimensions (W x D x H) | 28.75ʺ x 18.0ʺ x 37ʺ / 73.0cm x 45.7cm x 94.0 cm |
Caddy Dimensions (W x D x H) | External: 8.4ʺ x 10.0ʺ x 17.0ʺ/ 21.3cm x 25.5cm |
x 43.1 cm Slot Width: 1.25ʺ / 3.17 cm
Capacity| 30 devices
Weight (empty)| 58lb / 26.3kg
Rating| 120V, 12A max. 50-60Hz AC
Charging| Supports device power adapters up to 48W each, or 1,440W total
Warranty| For the latest information, please visit bretford.com/warranty.
Certifications| ETL Listed to UL 62368-1
Using Your Product
Wiring CUBE Transport Cart
Before you begin, ensure the unit is off and unplugged from the wall.
-
Place your devices into the caddies provided.
-
From the front of the cart, plug each of your device power adapters into the AC outlets, located at the back of the power adapter storage area.
-
Connect each device to its respective power adapter and secure the cords using the Cable Boss™ cord management features on the front of the cart. Alternate between wiring devices on the top shelf and wiring devices on the bottom shelf.
-
Manage and organize excess cord lengths in the power adapter storage area, as necessary.
-
Use the included Velcro straps to group the device power cords into bundles of five, for each caddy.
-
Connect the main CUBE Transport Cart power cable into the wall.
-
Toggle the power switch on (“RESET”).
Important Information
Safety Notice
- Product for indoor use only
- Ensure the power switch is in the OFF position and CUBE Transport Cart is disconnected from the wall outlet before plugging devices into e-unit.
- Do not plug the unit in if the switch or power cord has been damaged.
- Unplug unit from the wall before moving to a different location.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For safety purposes, make sure all electrical components do not exceed the maximum load rating of 12 amps.
- Arranging caddies and devices in the cart should be such that a hazardous condition is not achieved due to uneven mechanical loading.
Additional Resources
Contact Support
Technical support is available by contacting Bretford Customer Care via phone, email or the web:
Hours of Operation: M-F, 7:30am – 4:30pm CST
Telephone: +1-800-521-9614
Email:customerservice@bretford.com
Website:www.bretford.com/contact
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>