BRETFORD TVTL30CAD Cube Toploader User Guide
- June 15, 2024
- BRETFORD
Table of Contents
CUBE Toploader Cart
with Caddies
User Guide
About Your Product
Product Overview – Front View
The CUBE Toploader™ Cart with Caddies provides charging, security, and distribution for up to 30 devices.
Product Overview – Inside View
The CUBE Toploader™ Cart with Caddies provides charging, security, and distribution for up to 30 devices.
Technical Specifications
CUBE Toploader™ Cart 30 with Caddies
Model| TVTL30CAD CUBE Toploader™ Cart 30 with Caddies
TVTL30CADUSB CUBE Toploader™ Cart 30 with Caddies Pre- Wired
Outer Dimensions| 34ʺ x 23ʺ x 33ʺ / 86.4cm x 58.4cm x 83.8 cm
Caddy Dimensions| External: 8.4ʺ x 10.0ʺ x 17.0ʺ/ 21.3cm x 25.5cm x 43.1 cm
Capacity| 30 devices
Weight (empty)| TVTL30CAD 118lb / 53.5kg
TVTL30CADUSB 138lb / 62.6kg
Rating| 125Vac, 60Hz, 12A
Charging| Supports device power adapters up to 65W each, or 1,440W total
Warranty| For the latest information, please visit bretford.com/warranty.
Certifications| ETL Listed to UL 62368-1
Using Your Product
CUBE Toploader™ Cart
Setting the Combination Lock
Your new CUBE Cart comes equipped with a resettable Combination Padlock. You
can program the lock with your own combination. The lock starts with 0-0-0-0.
Follow the directions with the look for changing the combination. Remember to
depress the shackle before disengaging it from the lock.
Wiring CUBE Toploader™ Cart
Before you begin, ensure the unit is off and unplugged from the wall.
- TVTL30CADUSB comes fully pre-wired with USB-C adapters. SKIP to Step 10.
- For TVTL30CAD, use the key from the hardware pack to unlock the lower access panel.
- Remove the lower access panel to expose the power outlet modules.
- Open the CUBE Toploader TM cart lid, remove the three cord covers by loosening the thumbscrews
- Drop adapters through the center opening in each row – 10 adapters per opening. After every 5 adapters, access the lower panel to plug into outlets.
- Measuring the perfect length: With the device connector end, measure the length from the divider on the left to reach to the divider on the right. Then secure the cable into the CableBossTM cable management feature in the divider on the left
- Repeat above process for all 30 adapters.
- In each row, pull the 10 cords toward the center of the divider and reinstall the cord cover. Tighten the thumbscrew at the top. Push extra length behind the cover and toward the bottom of the cart.
- Replace the lower access panel and lock using the key.
- Place up to 5 devices into each Bretford Caddy and load into the CUBE ToploaderTM Cart. Recommended to place all charging ports on same side and placed into the cart towards the edge.
- Connect the main CUBE ToploaderTM Cart power cable into the wall.
- Toggle the power switch on (“RESET”).
Power Manager
When the cart is turned on, the timer begins rotating power to half of the
outlets every 10 minutes. This allows efficient charging of the devices in the
cart from one standard wall outlet
Important Information
Safety Notice
- Product for indoor use only
- Ensure the power switch is in the OFF position and CUBE ToploaderTM Cart is disconnected from the wall outlet before plugging devices into eunit.
- Do not plug the unit in if the switch or power cord has been damaged.
- Unplug unit from the wall before moving to a different location.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For safety purposes, make sure all electrical components do not exceed the maximum load rating of 12 amps.
- Arranging caddies and devices in the cart should be such that a hazardous condition is not achieved due to uneven mechanical loading.
- Access panel on rear is for use by Bretford authorized service agent only
The CUBE ToploaderTM Cart weight capacity:
Additional Resources
Contact Support
Technical support is available by contacting Bretford Customer Care via
phone, email or the web:
Hours of Operation: M-F, 7:30am – 4:30pm CST
Telephone: +1-800-521-9614
Email: customerservice@bretford.com
Website: www.bretford.com/contact
Bretford, CUBE, and CUBE ToploaderTM are trademarks or registered marks of Bretford Manufacturing, Inc. Patents pending. © 2021 Bretford Manufacturing, Inc. All rights reserved.
031-11197
Rev. 1 10/2021
10 of 10
Documents / Resources
|
BRETFORD TVTL30CAD Cube
Toploader
[pdf] User Guide
TVTL30CAD Cube Toploader, TVTL30CAD, Cube Toploader, Toploader
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>