datacolor Match Pigment Smart Color Matching Solution Installation Guide
- June 3, 2024
- datacolor
Table of Contents
datacolor Match Pigment Smart Color Matching Solution
Datacolor MATCHPIGMENT™ Stand-Alone Installation Guide
All efforts have been made to ensure the accuracy of the information presented
in this format. However, should any errors be detected, Datacolor appreciates
your efforts to notify us of these oversights. Changes are periodically made
to this information and are incorporated into forthcoming versions. Datacolor
reserves the right to make improvements and/or changes in the product(s)
and/or program(s) described in this material at any time. © 2017 Datacolor.
Datacolor, SPECTRUM and other Datacolor product trademarks are the property of
Datacolor. Microsoft and Windows are either registered trademarks of Microsoft
Corporation in the United States and/or other countries. To obtain information
on local agents, contact either of the offices listed below, or visit our
website at www.datacolor.com.
Support Questions?
If you need help with a Datacolor product, please contact one of our top-rated
technical support teams located around the world for your convenience. You can
find contact information below for the Datacolor office in your area.
Introduction
This document will provide information on how to install Datacolor Match
Pigment on a new system or as an upgrade for an existing installation.
This document is for stand-alone computer systems.
The installation procedure includes the following steps:
-
Installation of Datacolor MATCHPIGMENT
The Datacolor Match Pigment program must be installed after installing Sybase. -
Software License Validation
Datacolor Match Pigment will run in a demo mode for 14 days. You will need to validate your software license during the demo period.
System Requirements
The system requirements shown below are the recommended configuration to ensure effective operation of the Datacolor MATCHPIGMENT software in a stand- alone configuration.
Recommended hardware configuration
Notes
- Minimum system configurations may limit performance, data capacity and operation of some features. Faster processor, more memory and faster hard drives will significantly enhance performance.
- Accurate on-screen color display requires monitor calibration and true-color video mode.
- Datacolor spectrophotometers use either an RS-232 Serial or USB connectors. Datacolor Spyder requires a universal serial bus (USB) connection. Printer port requirements (Parallel or USB…) depend on the selected printer.
Please contact Datacolor for Terminal Server hardware and software
requirements.
Terminal Server Configurations
For information on installing Datacolor Match Pigment on a terminal server,
please see the Installation Instructions for Sybase Installation Guide.
New Installation vs. Upgrade
When preparing to upgrade your system, we strongly recommend the following:
- Restart the system before you begin the upgrade. This is especially important if you are running a previous release of Datacolor MATCHPIGMENT . This is done to clear the memory of any modules that might interfere with the program upgrade.
- Backup your database. This can be accomplished through the MatchPigment menu by clicking Database, and then Backup Database. Follow the prompts.
- Store the data on the Datacolor TOOLS desktop before you begin the upgrade. See also Datacolor TOOLS User Guide, Appendix for a list of all files that should be backed up prior to performing an upgrade.
Firewall Blocking Messages
If you have enabled a firewall on the system, you may see a Windows Security
dialog box on several occasions during the installation. You must click
Unblock to continue the installation.
Adobe Reader Installation
To view and print any Datacolor User Guide or PDF document, you must have
installed Adobe Reader. To install Adobe Reader, click on the Install Adobe
Reader button on the installation menu.
Viewing Datacolor MATCHPIGMENT User’s Guide
Once Adobe Reader is installed, you can view the Datacolor MATCHPIGMENT User’s
Guide. It is located on the program USB in the DMP\Documentation directory,
and is in a PDF file format (Datacolor MATCHPIGMENT User Guide.PDF)
Overview
The Datacolor MATCHPIGMENT product includes both Datacolor MATCHPIGMENT and Datacolor TOOLS. These are two separate programs contained on separate USB’s. Please follow these instructions, to insure the successful installation of Datacolor MATCHPIGMENT.
NOTE
If Sybase V12 is not installed on the system you cannot complete the
installation of Datacolor
MATCHPIGMENT.
Before You Begin
- Microsoft Windows® should be properly installed on your computer.
- You must have Windows Administrator rights to install this software.
- Restart the system before installing the software. This removes any memory-resident modules that may interfere with the installation, and is especially important if you have been running a previous version of Datacolor MATCHPIGMENT.
- Install Sybase V12 database management software.
- Close all other programs that are running.
- Have all program installations readily available.
- Install Datacolor MATCHPIGMENT before installing Datacolor TOOLS.
Installation Procedure
To install Datacolor MATCHPIGMENT:
-
Place the Datacolor MATCHPIGMENT USB into the port.
-
Select the Menu.exe
The Main Installation menu should appear automatically: -
Click on Install Datacolor MATCHPIGMENT.
-
From the MATCH Pigment Installation Menu select Install Datacolor MATCHPIGMENT.
-
The Datacolor MATCHPIGMENT installation will prompt you to select a language:
-
Select the appropriate language, and click Next. The Installation will begin and then the Installation Wizard will display:
Click Next to continue -
A software license agreement is displayed:
-
To continue with the installation, you must accept the agreement by clicking Yes.
-
The program confirms the folder location for Datacolor MATCHPIGMENT:
- To select a different location for programs, click Browse.
- To accept the default, click Next.
-
The installation confirms the location for the Common Applications Data location. The locations vary depending on whether you are using Microsoft Windows XP, or Microsoft Vista:
The common applications location is: C:\ProgramData.
You should accept the default locations unless otherwise directed by Datacolor applications.
Click Next to accept the default locations.
Select Database Location
The installation confirms the folder location for the Datacolor MATCH PIGMENT database files.
- To select a different folder for the database, click Browse.
-
Desktop and Shortcut Options.
Click Next to continue. -
Program Folder Selection
Click Next to continue. -
Shared Components will now install.
The Datacolor MatchPigmentNavigator window will launch. This component contains elements that are shared with the Datacolor TOOLS application. This screen will display:
Click Next to continue. -
The MatchPigmentNavigator wizard will continue.
Click Install to continue. -
A progress bar will appear on the window and when it fills, the MatchPigmentNavigator installation will be complete.
Click Finish to continue. -
The installation will now begin:
-
Installing the Instrument Drivers:
Click install to continue. -
Installing additional components:
-
The MatchCOM matching engine is installed:
-
After the installation is completed, you will see this screen:
-
You will be prompted to reboot your computer.
You must reboot before you can start the Datacolor Match Pigment program. If you select No, you will receive the following message:
Click OK to reboot your computer.
Software Licensing Procedure
You must license the software to use it. When the program is installed, you
are given a 14-day demonstration period during which you can run the programs
without a valid license. We strongly recommend that you validate all software
licenses immediately after installing the software. You should license
Datacolor MATCHPIGMENT first. The procedure detailed below is used to license
the software via a direct web connection.
Licensing Datacolor MATCHPIGMENT
-
Launch Datacolor MATCHPIGMENT.
The License Validation screen is displayed: -
Double-click on the first product to be licensed.
NOTES
You can license any product that appears on this window. During the demo period, you can click Close to bypass the licensing procedure. However, once the demo period has expired, you cannot proceed without validating the license(s). -
Double-click on the button for the Datacolor MATCHPIGMENT product to be validated.
The Datacolor Security Client window will open.
-
In the Serial Number field, enter the serial number for the product you have selected. This is found on the CD case.
-
Click on the link to the web connection:
The window below is displayed:
This window provides an Internet connection to the Datacolor web validation service, and remains open during the validation procedure.- In the First Name, Last Name and Email fields, provide your contact information.
- In the Serial Number field, enter the product serial number again. It must match the number you entered in the previous screen.
-
Click the Continue button.
The window below is displayed:
This window verifies that the serial number is valid, and displays information about the product. -
Click Continue to proceed.
The program will prompt you for the computer validation number: -
Enter the computer validation number from the Datacolor Security Client window, and click Validate to continue.
A number will be displayed in the Unlock Response Number field.
-
Return to the Datacolor Security Client screen, and enter the Unlock Response Number:
-
Click Continue. The Security Client window closes.
The web validation screen remains displayed. The validation process is completed, and the Datacolor MATCHPIGMENT product you selected is now licensed.
To validate a different Datacolor product license:- Click Close This Window. The Datacolor license validation window is displayed.
- Choose the next product license to be validated, and repeat the procedure.
-
To end the licensing procedure, click Close this Window.
NOTE
You will receive an email confirmation containing the Serial Number and Unlock
Response Number for each license you validate. We recommend that you make
copies of these for reference purposes.
Americas
+1.609.895.7465
+1.800.982.6496 (toll-free)
+1.609.895.7404 (fax)
NSASupport@datacolor.com
Europe
+41.44.835.3740
+41.44.835.3749 (fax)
EMASupport@datacolor.com
Asia Pacific
+852.2420.8606
+852.2420.8320 (fax)
ASPSupport@datacolor.com
Or Contact Your Local Representative
Datacolor has representatives in over 60 countries.
For support, visit http://industrial.datacolor.com/support.
Manufactured by Datacolor
5 Princess Road
Lawrenceville, NJ 08648
1.609.924.2189
Committed to Excellence. Dedicated to Quality. Certified to ISO 9001 in Manufacturing Centers Worldwide.