datacolor STPP100 Spyder Tripod Pro Owner’s Manual
- June 5, 2024
- datacolor
Table of Contents
datacolor STPP100 Spyder Tripod Pro
Owner’s Manual
Smartphone OS updates or changes in the future might lead to incompatible.
Product illustration
How To Use
Easy to set up, Easy to use
Pairing
- Turn on the shutter by switching the on/off button, AB Shutter3 will enter into pairing mode and the indicator LED starts to flash quickly at the same time
- Activate the Wireless function on your phone and source the devices around
- Select the device of AB Shutter3 ” from the list and paring will be finished automatically in a few seconds
Shooting
- Select a correct app and press the proper button on the shutter Tor 108 and Android phones to take the photos.
Compatible devices
- Compatible with Android 4.2.2 OS or newer and ios 6.0 or newer.
Specifications
Battery
- Positive pole upwards to install the battery.
Easy to set up, Easy to use
Pairing
- Turn on the shutter by switching the on/off button, the shutter will enter into pairing mode, and the indicator LED starts to flash quickly at the same time:
- Activate the Bluetooth function on your phone and sourcing the devices around;
- Select the device of “AB shutter 3” from the list and pairing will be finished automatically in few seconds.
Select APP
Use the inbuilt camera APP to take the photos via “AB shutter 3, or you can download the APP of camera 360 ” from Google play the inbuilt camera cannot be supported, check the compatible device and APP in the following instructions.
Shooting
- Select a correct APP and press the proper button on the shutter for iOS and Android phones to take the photos.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.