Medtronic MiniMed 780G System Insulin Pump Instructions
- June 4, 2024
- Medtronic
Table of Contents
MiniMed 780G System Insulin Pump
Instructions
**MiniMed™ 780G System at a glance
**
This quick guide covers the main functions of the MiniMed™ 780G system when the automatic SmartGuard™ function is active. For more details on how to use the product, refer to the system’s instruction manual.
Shortcuts
| To stop the entire insulin delivery or bolus, press UPYou can continue
delivery from the same location.|
---|---|---
| You will find the bolus screen by pressing DOWN.|
| You can access the ‘Time in Range’ by pressing RIGHT.|
| You can view the sensor graph by pressing the DIAMOND BUTTON.|
| Select Button
| Notification Light
Menu
- Press the SELECT button on the Home screen
- The Insulin icon will show as selected
- Move to the desired icon: it changes color and the menu name appears at the top of the screen
Sensor calibration
The insulin pump needs to be calibrated at least every 12 hours. Sometimes the
pump may also request extra calibration to improve performance. When the pump
needs calibration, it displays an Enter BG now alert.
- Use only BG values from fingertips for calibration
- See the next page for instructions on measuring your blood sugar
Note: If the calibration was not accepted, wait at least 15 minutes. Wash your hands and measure the BG again. If the “Calibration not accepted” alert is still received after the second calibration, a Change Sensor alert occurs.
Suspending insulin delivery
If the pump is disconnected from the body, insulin delivery needs to be
suspended.
Suspend: Press UP and select Suspend all Delivery. Select Yes.
Resume: Press UP and select Resume Basal. Select Yes.
Measuring blood glucose
You can also enter blood glucose
to the pump manually:
- Choose from the menu.
- Enter BG
- Select SAVE.
Temporary target
When needed, you can set a temporary target (8.3 mmol/l) for the pump from the SmartGuard™ menu. When the temporary target is active, auto-correction boluses are not delivered.
Pump home screens
Blue Shield:
SmartGuard™ function is active and works normally.
Red bar:
Insulin delivery is suspended.
Note: If the pump is in manual mode, the shield is not shown on the home screen. The pump also works a little differently. Confirm the instructions for manual mode separately.
Pump alerts and all alarms
Pump alerts and all alarms All alerts, alarms, and messages given by the pump must be acknowledged without delay. If necessary, follow the instructions displayed on the pump screen.
Alert:
Your pump needs attention.
E.g. Low battery.
Low reservoir.
Alarm:
Address right away.
E.g. Insulin flow is blocked. Replace the battery now.
Note: The notification light flashes when the pump has an alarm or alert.
Staying in the SmartGuard™ feature:
When the pump requires an action to stay in the SmartGuard™ feature, it
provides notification and the time remaining before an exit to the manual mode
(max. 4 hours).
1) Read the notification from the bar.
2) Respond to the action needed.
If the pump exits to manual mode, confirm the instructions separately.
Australasia Pty Ltd
2 Alma Road
Macquarie Park, NSW 2113, Australia
Tel: +61 2 9857 9000
Fax: +61 2 9889 5167
Toll-Free: 1800 777 808
E-Mail:
[email protected]
Facebook: www.facebook.com/MedtronicDiabetesAUS
YouTube: Medtronic Diabetes ANZ
https://www.medtronic-diabetes.com.au/
Always read the instructions for use.
For detailed information regarding the instructions for use, indications,
contraindications, warnings, precautions, and potential adverse events, please
consult the device manually. For further information, contact your local
Medtronic representative. © 2021 Medtronic Australasia Pty Ltd. All Rights
Reserved. Please note: In contacting the Diabetes Toll-Free, your personal and
health information may be disclosed to an operator located outside Australia.
10250-102021