Medtronic MiniMed 630G Replacement Pump Owner’s Manual

TRANSFER SETTINGS
Misnamed™ 630G Replacement Pump
Owner’s Manual

Misnamed 630G Replacement Pump

Transfer Settings for the Misnamed 630G Replacement Pump
STEP 1 – Before you send your original pump back, copy your current settings onto the Insulin Pump Settings Form. If for any reason you cannot copy the settings, please contact your healthcare professional or reference your CareLink™ Personal reports.
STEP 2 – Insert a AA battery into your new pump. You can use either a lithium, alkaline or rechargeable battery.
STEP 3 – Follow the instructions found in this guide to enter the settings that you have recorded on the Insulin Pump Settings Form into your new pump. For additional information on your pump, please consult the MiniMed pump system user guide.
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Settings Form for the Misnamed 630G insulin pump
We recommend that you record all settings on this form to refer to as you enter them into the new pump.
Insulin Settings, Utilities, Sensor Settings

INSULIN SETTINGS

BOLUS WIZARD SETUP:

Sensor Settings

HIGH SETTINGS Menu > Sensor Settings > High Settings

Time Period| High Limit| Alert before High| Alert on High| Rise Alerta
12:00 A – | mg/dL| On min| On| On mg/dL/min or ↑ | ↑↑ | ↑↑↑
– | __ mg/dL| On min| On| On mg/dL/min or ↑ | ↑↑ | ↑↑↑
__ – | mg/dL| On min| On| On mg/dL/min or ↑ | ↑↑ | ↑↑↑
High Snooze: __ minutes

a Option only available when Rise Alert is on

LOW SETTINGS Menu > Sensor Settings > Low Settings

Time Period| Low Limit| Alert before Low| Suspend on Low| Alert on Low
12:00 A – | mg/dL| On| On| On
– | mg/dL| On| On| On
– | mg/dL| On| On| On
Low Snooze: __ minutes

Programming the Misnamed 630G insulin pump

Startup Wizard
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Once you’ve inserted the battery, the Startup Wizard begins.

1. Select English.
2. When the Select Time Format screen appears, select a 12 Hour or a 24 Hour time format.
3. When Enter Time appears, press to the correct hour and press .
4. Press to the correct minutes and press .
5. Press to change the AM to PM if needed and press .
6. Select Next.
7. When Enter Date appears, select Year. Press to correct year and press . Repeat this to set Month and Day.
8. Select Next.
9. The rewinding screen will briefly appear. Select OK.

Setting Max Basal

Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Insulin Settings > Max Basal/Bolus

1. Select Max Basal. A confirmation message appears. Select Continue.
2. Select Max Basal. Use to set the Max Basal amount and press .
3. Select Save.

Setting Max Bolus
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Insulin Settings > Max Basal/Bolus

1. Select Max Bolus. A confirmation message appears. Select Continue.
2.  Select Max Bolus. Use and to set the Max Bolus amount and press .
3. Select Save.

Setting a Basal Pattern

Note: The pump is intended to be used with a basal pattern. The basal pattern must be manually entered and saved into the pump. There will be no reminder message to program basal rates. Consult a healthcare professional to determine what basal pattern is needed. For more information about basal patterns, consult the Misnamed 630G System User Guide.
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Insulin Settings > Basal Pattern Setup

1. Select Basal 1.

2. Select Options.

3. Select Edit.

4. Press to enter End time. If you have only one basal rate, leave the end time on 12:00A and press . If you have more than one basal rate, press to change the end time and press .

5. Press to enter U/hr and press .

6. Continue adding end times and basal rates as needed. The end time for your last rate must be 12:00A.

7. The Done option appears only when the last End time in your basal pattern is set to 12:00A. Select Done after all settings are entered to go to the next screen.
   Note: Your basal rates have not yet been saved.

8. A screen appears that lets you review your basal pattern. Press to review all the settings. If you need to make any changes, press to return to the edit screen.
   Note: If you press to return to the edit screen without saving, your changes will not be saved. After making any changes on the edit screen, select Done to return to the review screen.

9. Select Save. If you do not select Save, your changes are not saved.

CAUTION: If you have not selected Save after settings are entered and the screen goes dark, the entered settings will not be saved.
Turn Bolus Wizard On and Setup
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Insulin Settings > Bolus Wizard Setup

1. Select Bolus Wizard to turn feature On.
2. Press to see the rest of the message then select Next.
3. Review the description of Carb Ratio and select Next.
4. Press to enter End time. Press again to leave the end time at 12:00A. If you have more than one carb ratio, use to change the end time and press .
5. Press to enter your carb ratio and press . Continue adding end times and carb ratios as needed.
6. Select Next when done.
7. Review the description of Insulin Sensitivity Factor and select Next.
8. Press to enter End time. Press again to leave the end time at 12:00A. If you have more than one insulin sensitivity factor, use to change the end time and press .
9. Press to enter your insulin sensitivity factor and press . Continue adding end times and insulin sensitivity factors as needed.
10. Select Next when done.
11. Review the description of BG Target and select Next.
12. Press to enter End time. Press again to leave the end time at 12:00A. If you have more than one BG target, use to change the end time and press .
13. Press to enter your Lo target and then press .
14. Press to enter your Hi target and then press . Continue adding end times and BG targets as needed.
15. Select Next when done.
16. Review the description of Active Insulin Time and select Next.
17. Press to enter Duration.
18. Press to enter hr. then press .
19. Select Save.

The Bolus Wizard setup is now complete.

Turn Sensor On
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Sensor Settings

• Select Sensor to turn feature On. You can now see the Sensor Settings menu options.

Programming High Settings
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Sensor Settings > High Settings

1. Select High Settings to turn feature On.
2. Press to set End time. Press again to leave the end time at 12:00A. If setting more than one time segment, press to enter end time of first segment, and press .
3. Press or to set Hi limit and press . Press again to continue.
4. Select each feature you wish to turn on. If a feature is on, select it again to turn it off. When finished, select Next.
5. Enter the next End time and repeat steps to enter limit and alerts, or if finished, select Done.
6. Verify that settings are correct and select Save.
7. If the snooze time needs to be changed, press to Snooze and press . Press to the correct time and press .
   Your High Settings are now entered.

Programming Low Settings
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Sensor Settings > Low Settings

1. Select Low Settings to turn feature On.
2. Press to set End time. Press again to leave the end time at 12:00A. If setting more than one time segment, press to enter end time of first segment, and press .
3. Press to set Lo limit and press . Press again to continue.
4. Select each alert and suspend feature you wish to turn on. If a feature is on, select it again to turn it off.
5. When finished, select Next. Enter the next End time and repeat steps to enter limit and alerts, or if finished, select Done.
6. Verify that settings are correct and select Save.
7. If the snooze time needs to be changed, press to Snooze and press . Press to the correct time and press .

Your Low Settings are now entered.

Connect the Transmitter

Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Utilities > Device Options > Connect Device > Auto Connect

1. Review Auto Connect message. Press and select Continue.
2. Make sure the transmitter is fully charged and remove it from the charger.
3. Immediately select Search on the pump.
4. Confirm that the serial number (SN) on the pump screen matches the serial number on the transmitter.
5. If they match, select Confirm.

The Manage Devices screen will appear with the serial number displayed. Your transmitter and pump are now connected.

Set Calibration Reminder
Note: The settings shown in this guide are for illustration purposes only — your settings may be different.
Menu > Reminders > Calibration

1. Select Reminder to turn the reminder On.
2. Select Time and enter a time between 5 minutes and 6 hours.
3. Select Save.

Note: Please take some time to review ALL your entries and ensure they have been correctly saved.

Technical Support

In Need of Technical Assistance?
24-Hour Technical Support is here to help
Call 1.800.646.4633
For medical advice, contact your healthcare team.

Medtronic MiniMed
18000 Devonshire Street
Northridge, CA 91325
USA
1 800 646 4633
+1 818 576 5555
www.medtronicdiabetes.com
RF: M994838A001
© 2022 Medtronic
M041699C001_1
2022-12-05

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>