Custom Brackets CB Folding T Flash Bracket CB Folding Instructions
- June 13, 2024
- Custom Brackets
Table of Contents
Custom Brackets CB Folding T Flash Bracket CB Folding
Features and Accessories
Optional Item (sold separately)
WFM-2 Locking shoe mount with anti-twist —- /for wireless operation, flashes
or cords without 114′ x 20 thread)
Camera mounting instructions
Choosing the camera position
The camera plate has two (2) camera position screw holes for positioning the
camera.
- Choosing the front or back hole Depends on anti-twist arms positioning.
Setting the camera anti-twist
Once the camera is positioned, adjust the two (2) camera anti-twists to
contact the front of the camera.
EB The anti-twist arm (with post) arm has four threaded holes and the camera
The anti-twist arm (with post) arm has four threaded holes and the camera
plate has a slot Only use the back threaded hole. Where the anti-twist post
makes contact to the camera is the photographer’s preference.
Tighten the two (2) camera anti-twist screws located on the bottom side of the
camera plate using the 1 /8″ Allen wrench provided with the bracket
The camera screw has some play in the sc1t1w hole. Make sure camera and camera
screw are pushed backward. This will insure the best anti-twist for the
camera.
Flash anti-twist instructions
Canon off-camera cord II, Canon Cord 3, Nikon SC-17 (first time installation)
- Attach cord with screw (do not tighten completely)
- Slide one anti-twist to cord (tighten anti-twist screw)
- Slide other anti-twist to cord (lighten anti-twist screw)
- nighen flash screw to cord
Nikon SC-28, SC-29 Cords (first time installation)
- Attach cord (reversed) with screw (do not tighten completely)
- Slide left anti-twist to cord (lighten anti-twist screw)
- Remove cord and install (normal)
- Slide right anti-twist to cord (tighten anti-twist screw)
- Tighten flash screw to cord
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>