taurus PROFESSIONAL 3 COMPACT Deep Fryer User Manual
- June 1, 2024
- taurus
Table of Contents
taurus PROFESSIONAL 3 COMPACT Deep Fryer
Specifications
- Model: Professional 3 Compact, Professional 3 Plus Compact
- Power: Electric
- Features: Lid, Lid handle, Temperature regulating thermostat, Pilot light, Automatic safety button, Control Unit, Heating element, Basket, Basket handle, Basket support, Tank, Level indicators, Rearm button, Mains connection housing, Control unit support
Product Usage Instructions:
Before Use:
- Before using the product for the first time, clean the parts that come in contact with food as described in the Cleaning section.
Filling Oil
- Open the lid.
Usage
- Fully extend the cable before plugging in.
- For Professional 3 Compact, remove the lid. This fryer is not designed to fry with the lid on.
- Slowly insert the basket into the tank to avoid overflow and splashing.
- Empty the basket.
Oil Draining System:
- Place the basket in the tank to allow excess oil from the food to drain.
After Using the Appliance
- Coil the cable and place it in the cable housing.
- The cable housing allows you to store and extract the necessary length of cable to operate the appliance safely, avoiding accident risks.
- Close the lid.
- Put on the protective lid.
- Clean the appliance.
Transport Handles:
- Do not mix oils of different qualities.
Cleaning
- Disassemble the appliance by following these steps:
- Remove the lid.
- The following parts are suitable for cleaning in hot soapy water or dishwasher (using a gentle wash program):
- Basket
- Lid
- Tank
- Body
FAQ
-
Q: Can I use the appliance without filling the oil?
A: No, do not start the appliance without first filling the oil tank to avoid damage. -
Q: How should I store the appliance?
A: Store the appliance out of reach of children or individuals who may not have experience with such devices.
DEEP FRYER
Professional 3 compact Professional 3 plus compact.
DESCRIPTION
- A Lid
- B Lid handle
- C Temperature regulating thermostat
- D Pilot light
- E Automatic safety button
- F Level profiles
- G Control Unit
- H Heating element
- I Basket
- J Basket handle
- K Basket support
- L Tank
- M Level indicators
- N Body
- O Rearm button
- P Mains connection housing
- Q Mains connection
- R Control unit support
- S Lid filter (*)
- T Peephole frying (*)
- U Oil filter (*)
(*) Only available in the model Professional 3 Plus compact.
USE AND CARE
- Fully extendl the appliance’s power cable before each use.
- Do not use the appliance if its accessories are not properly fitted.
- Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
- Do not use the appliance when empty.
- Do not start the appliance without first filling the oil lid.
- Do not move the appliance while in use.
- Do not move the appliance whilst in operation or if the oil is still hot. Once cooled, transport the appliance using the handles.
- Do not use the appliance if it is tipped up and do not turn it over.
- Do not turn the appliance over while it is in use or connected to the mains.
- Do not force the appliance’s work capacity.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when not in use and before undertaking any cleaning task.
- Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
- Do not store or transport the appliance if it is still hot.
- Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
- Never leave the appliance unattended when in use and keep out of the reach of children, as this is an electrical appliance that heats oil to high temperatures and may cause serious burns.
- If, for some reason, the oil was to catch fire, disconnect the appliance from the mains and smother the fire using the lid, a cover or a large kitchen cloth. NEVER WITH WATER.
- Turn the thermostat control to the minimum (MIN) setting. This does not mean that the iron is switched off permanently.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product’s packaging has been removed.
- Before using the product for the first time, clean the parts that will come into contact with food in the manner described in the cleaning section.
OIL FILLING
- Open the cover
- Ensure that the electrical equipment is appropriately positioned.
- Pour oil up to the mark indicating the MAXI-MUM level on the bowl
- The appliance must not be used with less oil than that indicated by the MINIMAL mark.
USE
- Extend the cable completely before plugging it in.
- Connect the appliance to the mains.
- Professional 3 compact ,Remove the lid. This fryer is not designed to fry with the lid on. Professional 3 plus compact can.
- Remove the basket and attach the handle by pivoting until the rods engage in the housing.
- The pilot light (D) comes on.
- Select the desired frying temperature using the thermostat control. The indicator light will turn red, indicating that the oil is being heated (close the lid to save energy).
- Prepare the food to be fried and place it in the basket, making sure that it does not rise above ¾ of its capacity. Allow the food to drain before placing it in the basket.
- Frozen food must be allowed for thaw before-hand. The placing of frozen food or food with high water content in the basket may cause the oil to suddenly spit after a few seconds.
- Wait until the pilot light (D) has gone out which will indicate that the appliance has reached an adequate temperature.
- Slowly place the basket in the bowl to avoid overflowing and splashing.
- When the food has been fried sufficiently, lift the basket and position it in the support in order to allow the excess oil to drain from the food.
- Empty the basket.
- Change the oil approximately every 15 or 20 frying operations, or every 5 – 6 months if not used frequently.
- In order to minimize the generation of acrylamide during the frying process, avoid to reach dark brown colours on the fried food, remove any burnt leftovers from the oil container, food rich in starch (such as potatoes or corns) should not be fried at temperatures higher to 170ºC.
OIL DRANING POSITION
- When the food has been fried sufficiently,remove the lid, lift the basket and hang it with the hook in the tank in order to allow draining the excess of oil from the food.
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Select the minimum position (MIN) using the thermostat control.
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- The cable housing means you can remove and have available the required length of cable for working with the appliance, preventing accident risk situations.
- Close the lid.
CABLE COMPARTMENT
- This appliance has a cable compartment situated on its posterior.
CARRY HANDLE/S
- This appliance has a handle on the upper part of the body, which facilitates comfortable transportation.
PRACTICAL RECOMMENDATIONS
- Fry a few pieces of bread to remove the smell of used oil.
- For food with a high-water content, it is better and quicker to fry in two lots with less food than in just one. This will reduce the risk of splashes and spillage.
- The “two-stage frying method” can be used for an even and crispy coating. This system consists of first frying the food until it is reasonably well done and then frying again using very hot oil to brown the food.
- Olive oil with a minimum acidity level is recommended for frying.
- Do not mix different oils.
- Wash potatoes before frying to stop them from sticking
SAFETY THERMAL PROTECTOR
- In the event of overheating, the thermal safety mechanism will be activated and the appliance will stop operating. When this occurs, the appliance should be disconnected from the mains and left to cool. Then press the rearming button, situated at the back of the electrical circuit, with the tip of a pen or similar in order to reactivate the appliance (Fig.?).
CLEANING
- Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
- Dismantle the appliance as follows:
- Take off the lid
- Remove the basket and take out the electrical equipment
- Remove the tank
- Carefully pour the used oil from the bowl into a container (not the sink), according to the regulations in force for the treatment and disposal of waste.
- Except for the power unit and the mains connection, all the parts can be cleaned with detergent and water or in washing up liquid. Rinse thoroughly to remove all traces of detergent
- Clean the electrical equipment and the mains connection with a damp cloth and dry. DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment using a damp cloth with a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
- Do not submerge the appliance in water or any other liquid, or place it under a running tap.
- If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use.
- The following parts are suitable for cleaning in hot soapy water or in a dishwasher (using a soft cleaning program):
- Basket
- Lid
- Tank
- Body
Avda. Barcelona, s/n 25790 Oliana Spain
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>