KIA OCV051173L Navigation-Based Smart Cruise Control User Guide
- June 3, 2024
- KIA
Table of Contents
OCV051173L Navigation-Based
Smart Cruise Control
User Guide
Navigation-Based Smart Cruise Control
Navigation-based Smart Cruise Control operation
Operating conditions
Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied:
- Smart Cruise Control is operating
- Driving on main roads of highways (or motorways)
NOTICE
For more details on how to operate Smart Cruise Control, refer to “Smart
Cruise Control (SCC) (if equipped)” on page 6-99.
Navigation-based Smart Cruise
Control display and control
When Navigation-based Smart Cruise Control operates, it will be displayed on
the cluster as follows:
Navigation-based Smart Cruise Control standby
If the operating conditions are satisfied, the white ( ) symbol will illuminate.
Navigation-based Smart Cruise Control operating
If temporary deceleration is required in the standby state and Navigation-
based Smart Cruise Control is operating, thegreen ( ) symbol will illuminate
on the cluster.
If the Highway Set Speed Auto Changefunction operates, the green ( )symbol and
set speed will illuminate on the cluster, and an audible warning will sound.
WARNING
The warning message will appear in the following circumstances:
A: Drive carefully
- Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed.
NOTICE
Highway Curve Zone Auto Slowdown and Set Speed Auto Change function uses the
same ( ) symbol.
Highway Curve Zone Auto Slowdown
- Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
- Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road.
The higher the driving speed, deceleration will start faster.
Highway Set Speed Auto Change
-
Highway Set Speed Auto Change function will operate when Smart Cruise Control set speed and the highway (or motorway) speed limit is matched.
-
While Highway Set Speed Auto Change function is operating, when the highway (or motorway), speed limit changes, Smart Cruise Control set speed automatically changes to the changed speed limit.
-
If Smart Cruise Control set speed is adjusted different from the speed limit, Highway Set Speed Auto
Change function will be in the standbystate. -
If Highway Set Speed Auto Change function has changed to the standby state by driving on a road other than the highway (or motorway) main road,Highway Set Speed Auto Change function will operate again when you drive on the main road again without setting the set speed.
-
If Highway Set Speed Auto Change function has changed to the standby state by depressing the brake pedal, press the ( ) switch to restart the function.
-
Highway Set Speed Auto Change function does not operate on highway interchanges or junctions.
NOTICE
- Highway Set Speed Auto Change function only operates based on the speed limits of the highway (or motorway), it does not work with the speed cameras.
- When Highway Set Speed Auto Change function is operating, the vehicle automatically accelerates or decelerates when the highway (or motorway) speed limit changes.
- The maximum set speed for Highway Set Speed Auto Change function is 140 km/h (90 mph).
- If the speed limit of a new road is not updated in the navigation, Highway Set Speed Auto Change function may not operate properly.
- If the speed unit is set to a unit other than the speed unit used in your country, Highway Set Speed Auto Change function may not operate properly.
NOTICE
The images or colors may be displayed differently depending on the
specifications of the instrument cluster or theme.
Navigation-based Smart Cruise Control limitations
Navigation-based Smart Cruise Control may not operate normally under the
following circumstances:
- The navigation is not working properly
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>