KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions
- June 6, 2024
- KIA
Table of Contents
KIA XR-4978 Telluride Smart Key 2020+ 5Buttons
Description of manufacturer
Trade mark : DNKR
Name and address of manufacturer
- Name : DENSO KOREA CORPORATION
- Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si,
Name and address of applicant
- Name : DENSO KOREA CORPORATION
- Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si,
Technical description of Smart Key FOB
Type
Model : FD00840
Specifications of Electronic Key
- Nominal frequency: 433.92MHz
- Oscillator frequency (IC clock) : 16MHz
- Oscillator frequency (RF clock) : 27.6MHz
- Type of modulation: FSK/F1D
- Power Supply : 3 VDC
- Nominal supply voltage : One lithium battery
- Type of Battery : Built-in type (Fixed)
- Antenna
Outline of Smart Key FOB
Smart Key FOB is mainly used for locking or unlocking the doors of vehicles. Smart Key FOB detects signals when it reaches the vicinity of vehicle, and sends signals using radiofrequency. Also, Smart Key FOB sends a radio wave signal while a button is pushed. When the button is released, the radio wave signal is automatically off within 0.392 seconds. When the button is depressed continuously, Smart Key FOB sends a signal for a predetermined constant time.
This product sends a signal when the following buttons are pushed.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co- located or operating in conjunction with any other antenna or transmitter. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>