Coolaroo 501365 Elevated Pet Bed Pro Instruction Manual
- June 13, 2024
- Coolaroo
Table of Contents
Coolaroo 501365 Elevated Pet Bed Pro Instruction Manual
Congratulations on the purchase of your Coolaroo Elevated Pet Bed Pro. Please be sure to read the instructions before setting up your pet bed.
NO ADDITIONAL
5 minute set up (approximate time)
Parts List
Position the Long Crossbar beneath the Short Crossbar. Open the Slide-Lock Corner piece and place the solid end onto the remaining Short Crossbar (A). Flip the bed over, pull the final crossbar into the open slot (B), and close the Slide-Lock Corner (C)
Note: This product relies on tension, so it might be a tight fit! The tight fit keeps the pet bed taut over time.
Fabric not recommended for use in strong storms or high winds.
MAINTENANCE: Your Elevated Pet Bed Pro has been made of the finest materials and, when properly cared for, will provide years of comfort and support for your pet. To clean, simply rinse with water, scrub with mild soap or any nonabrasive cleaner, rinse, and air dry. Allow bed to dry completely before storing. Call us for missing parts or mechanical problems.
CAUTION: Use of solvents or abrasive cleaners may damage the fabric and will void your warranty. Do not use bleach or chlorine.
Questions or Comments? Contact us at:
GALE Pacific USA | www.coolaroousa.com |
1-800-560-4667
© by GALE Pacific Limited. All rights reserved. Coolaroo® is a registered
trademark of GALE Pacific Limited. coolaroousa.com
coolaroo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>