Ezencon EZ-Y18D Hand Massager User Manual

June 10, 2024
Ezencon

Ezencon Logo User ManualEzencon EZ Y18D Hand Massager EZ-Y18D Hand Massager

Ezencon has been focused on household electric massagers for more than ten years who committed to providing customers with a healthy and active lifestyle.
Smart choose, happy life.

Features

  1. Intelligent pressure with soothing heat function.
  2. Three massage modes to choose (Refresh, Health care, Relax)
  3. Each massage mode with 3 intensity levels for options
  4. Build in rechargeable Lithium batery
  5. Buton control panel

Contents

  • Hand Massager
  • Charging Adapter
  • User Manual

Ezencon EZ Y18D Hand Massager - Charging Adapter

Product Informaton

Product name————————————Hand Massager
Product model——————————EZ-Y18D
Rated voltage—————————5V ****
Rated power——————————10W
Batery capacity————————-2600mAH
Regular time———————-15 min
Product weight————————-0.84 kg

Instructons for Use

Ezencon EZ Y18D Hand Massager - Power buton

Power button
Press the power button to turn on the device, and activate the default mode”Refresh” at low intensity, press again to turn off the device.
Timer button
The default timer is 15 minutes to automatically turn off. Press to set the timer for 5/10/15 minutes.
Heating button
Press to turn on/off the heating function.
Intensity button
Press to set the massage intensity at Low, Medium,High Level and the corresponding LED will light on.
Mode button
Press to change the massage mode between Ml to M3 the corresponding LED will light on. Ml: Refresh, hand back and wrist massage in equably. M2: Health care, massage focus on hand back with pressure relief. M3: Relax, mainly massage for wrist.

Ezencon EZ Y18D Hand Massager - Power buton 1

Note: Air Release Valve Instructons

  1. Default mode: OFF, which ensure the air bags can be inflated and offer air compression.
  2. Air release valve is seting for emergency use only. Turn to “ON” to quickly deflate the air bags.
  3. When the air bags fail, please check the valve and make sure it’s OFF.

Batery Charging

Ezencon EZ Y18D Hand Massager - Batery Charging

  1. When the batey is low, all indicators will start flashing.
  2. Connect the USB cable to any USB charger, it can be plugged in the portable power bank, mobile phone batery chargers, laptop and any USB port.
  3. When charging, the indicator light will turn red.
  4. When full charge, the indicate light will turn green.
  5. Normally it takes about 3~4 hours to fully charged.
  6. You are able to use the massager whilst charging, but it is recommended to charge the batery first then use.

! Note
You should allow your body some rest periods. To avoid straining your muscles too much, we recommend to not exceed a contnuous massage of 15 Minutes per time and not exceed 2 times use one day.
Battery Disposal Warning:
The unit contains a Lithium lon battery. Please contact your local recycling center to find out how to properly dispose of the product.

  • If you suffer from any of the medical conditions listed below, consult with a doctor before using this relaxation massage device.
  • If you:
  • Suffer from a heart condition.
  • Have a sensory disorder or pacemaker.
  • Suffer from osteoporosis or diabetes.
  • Have a malignant tumor.
  • Have neurological disorder or perceptual disorder on head.
  • Have fractured or head surgery of your massaging area.
  • Head skin disease and allergic dermatitis.
  • Suffering from acute diseases or are undergoing medical treatment.
  • We advise you to consult with your doctor before using this massager.
  • The packaging material supplied should not be used as a toy.
  • Failure to observe the above instructions may constitute misuse of the product and can cause serious injury or burns.

Safety Instructons

READ ALL INSTRUCTIONS BEFORE USE. SAVE THESE I NSTRUCTIONS FOR FUTURE REFERENCE.

  • Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
  • Do not wet,do not use pins, never remove cover.
  • This items is NOT A TOY. Close supervision is necessary when this appliance is used by, on,or near children or disabled persons.
  • This appliance should never be left unattended when plugged in.
  • Any possible repairs may only be carried out by authorized expert staff.lmprop-er use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
  • Never touch the power plug with wet hands.
  • Please avoid contact of the device with water, high temperatures and direct sunlight.
  • Do not use any damaged cables, plugs or loose sockets.
  • In case of malfunction, disconnect immediately from the mains.
  • Do not use if you have skin disorders, open wounds,or swollen or inflamed areas.
  • Misuse or incorrect use excludes any liability for damage.
  • Do not use this device while driving.
  • Do not use this product for medical treatment.
  • In order to avoid excessively stimulating the muscles and nerves, the recom-mended massage time should not be exceeded 15 minutes at a time.

Troubleshootng

Trouble Reason/Solution
Can not start the massager Battery Low,please charge it before using
The massager stop abnormally Battery runs out of power, charge the battery;

Self-timed 15 mins is out, restart the product
Massager slight noise| It is normal working noise of the internal mechanism
Airbag not compressing/not inflating| Check if the valve switch on the back of the hand massager is turned OFF

Care and Maintenance

Care and cleaning instructons

  1. Always unplug the unit before cleaning it.
  2. Before cleaning, allow unit to cool.
  3. Dampen a cloth in water or a 3%-5% mild detergent soluton.
  4. Wipe the dirty areas with the wet cloth. Do not use sharp brush, sharp tool, gasoline and diesel to clean it.
  5. Do not use wet cloth clean control panel, lest cause failure, only use dry cloth to wipe the control panel.
  6. Never submerge any part of the unit in liquid.
  7. Wait for the unit to become fully dry before use.

Maintenance

  1. Please keep it into a box and keep in a safe, dry and cool place.
  2. Do not keep it in any place with high temperature, near fire or direct sunlight,or it may faded or damaged.
  3. Do not contact benzene, diluent or any other corrosive liquid.

Warranty

If you have any issue about the product, please feel free to contact us by sending email to support@ezencon.com We will strive to provide the best service within 24 hours.
30 days unconditonally Return
Ezencon product can be returned to receive a full refund for any reason within 30 days.Please contact our customers service ( support@ezencon.com ), our staff will contact you within 24 hours.
90 days refund/replace
Ezencon product can be returned / replaced within 90 days if the product break down in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.
Attention!
No warranty will be given to any force majeure and man-made causes to a defective product, such as improper care, personal tear down and willful damage,etc.

Extend Warranty for Free

▲ Send message “Warranty” and email us support@ezencon.com to extend your warranty from 1 year to 3 years.

Ezencon Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals