OLIGHT i3T EOS Brass User Manual
- June 7, 2024
- OLIGHT
Table of Contents
USER MANUAL
Thank you for purchasing this Olight product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
| | |
---|---|---|---
HIGH| 180 lumens| 60m| 21min
LOW| 5 lumens| 12m| 16h
| | 
|
---|---|---|---
900cd| 1.5m| IPX8| 60m
LENGTH| | 89mm / 3.5in|
BEZEL DIAM.| | 15mm / 0.59in|
WEIGHT| | 75g / 2.65oz
(Including battery)|
*All above specifications are test results based on ANSI/NEMA FL1-2009 Standards
TEAR HERE TO TAKE OUT THE PRODUCT AND DEOXIDIZER.
INSULATING FILM
Before first use, unscrew the tail cap and remove the insulating film.
BATTERY INSTALLATION
If the battery needs to be replaced, make sure that the positive end of the new battery faces the flashlight head when you put it in.
AVAILABLE BATTERIES
- 1 x 1.5V AAA alkaline battery (included)
- 1 x AAA lithium battery
- 1 x AAA NiMH battery
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight, or unexpected danger.
- Throw away the deoxidizer contained in the plastic bag. Keep it out of reach of children to prevent poisoning.
WARNING
- Keep out of reach of children.
- If the light is about to be put aside for a long time or be transported, please unscrew the tailcap and remove the battery to cut off the circuit.
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will go too low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
- It is normal for the flashlight not to be able to reach 180 lumens when the battery voltage is too low (under 1.0V).
- It is normal for the flashlight to blink when the battery is running out.
When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click). Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found here:
https://olightworld.com/ec-declaration
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 year of purchase : Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support
[email protected]
Global Customer Support
[email protected]
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight