CALIBER HWP303U Smart Power Socket User Manual
- June 3, 2024
- CALIBER
Table of Contents
CALIBER HWP303U Smart Power Socket User Manual
SPECIFICATIONS
- Smart 3 way socket type F
- Free “Caliber SMART HOME” app
- Wireless Protocols – Bluetooth® and Wi-Fi freq. 2.4GHz
- Physical ON/OFF button
- All 3 plug sockets can be switched on/off independently, USB outlets switch on/ off simultaneously.
- Cable length: 1,5 meters
- 4 USB charge outputs
- USB Smart charging: 2.4A
- USB DC output: 5.0V/2.4A Max (4.2A max. total) 21W total power
- Child proof power socket
- Rated Current: 3x 8A outputs (1840W • max. 16A / 3680W Total)
- ABS+PC Fire retardant
- IP20 rated
- Power supply: AC 110V-240V~, 50/60HZ
- Smart Home – powered by Tuya
- Accessible by multiple devices (phones, tablets, etc)
- Hacker proof ISO27017:2015
- APP works with any internet connection (WiFi or mobile data)
Communication Mode: Wi-Fi 802.11 b/g/n (2.4GHz) Max e.r.p: <100mW/20dBm
Bluetooth® 2402-2480 Mhz Max e.r.p: <100mW/20dBm
Power supply: AC 110V-240V ~ 50HZ/60Hz
Rated Current: 16A (3840W)
PRODUCT OVERVIEW
The smart EU 3 way socket is a Wi-Fi based socket that works perfectly with Amazon Alexa and Google Assistant by voice control. You can either control it with Android and iOS based APP by phone, anywhere, at any time.
PRODUCT FEATURES
- Amazon Alexa and Google Assistant compatible
- Wi-Fi connection supported
- Bluetooth connection (direct from phone)
- Timing setting available
- Schedule setting available
- Firmware OTA upgrade supported
- CE, RoHS certified
- Energy monitoring
- APP support: iOS 8.0 or Android 4.1 and higher
Safety precautions
Do not open the device. Use the device only for its intended purpose. Do not
use the device if it is damaged or defective. In this case, replacement is
required. This device is intended for indoor use only. Do not use this device
outdoors.
The devices operate only on a stable 2.4GHz Wi-Fi network.
Getting Started
APP download and Account binding
- Scan the QR code on the rear side of this manual to download the APP for Android or iOS system. Or you can download the ‘Caliber smart home’ APP on Apple Store and Google Play.
- Start the APP and register an account with your email address/mobile number and then log-in with the registered account.
Add device:
- Open Bluetooth on your smartphone.
- Enable Bluetooth and location permission for ‘Caliber Smart Home’ app, so the app can find the device via bluetooth.
- Press and hold the ON/OFF button for 5 seconds to enter the connection mode. The LED indicator will blink rapidly. If the LED indicator flashes slowly, press and hold the POWER button again for 5 seconds until the LED indicator flashes quickly.
- In the Caliber Smart Home app, click on the blue plus [+] in the upper right corner to add a device and select “Power distribution”. Then follow the on-screen instructions which may take approximately 30 seconds.
- When the HWP303U is added, the ON/OFF button can also be used manually to turn on or off the connected device.
Go to support.calibereurope.com and enter the model number in the search area to find additional information.
Visit our smart home forum where users share their experiences https://support.calibereurope.com/community/
We are constantly improving/updating our products and product information. It is therefore possible that there is a small difference between the description in this manual and the operation of the product. If something is different or not clear, always check our website for the most current version.
The images used are indicative and may vary per device and version. Some words in the manual may differ in translation from the exact words used in the app.