CALIBER HPG540BT Bluetooth speaker Instruction Manual

HPG540BT Bluetooth speaker
Instruction Manual

Total RMS powEr BOW
Built-in connections:| – Standard USB-A connection (Nadu • max 32GB) – Aux-in 3.5mm jack connection -14″ (6.3mm) Jack input for wired microphone
Power supply:| Built-in rechargeable lithium battery Battery 74V 4400mAh (up to 6 hours playtime)
Power adaptor:| Input: AC100-240V. 50 60Hz, 0.3A. Output: 5Vdc. 0.1-2.1A (10.5W Max)
REchargE powEr:| Charge via USB-C 5.0Vdc, 2.1A
ChargE timE| 5 Hours ( Empty => full )
Dimensions:| 452(W) x 182(D) x 234(H) mm
PackagE contains| HPG54OBT. Manual. Audio Cable 3.5mm, Adaptor + Charging cablE USB-C

Note: we advise you to use the provided adapter only

1. Passive radiators
   Amplify Bass in all directions

2. Easy carrying handle

3. Previous track /Volume decrease
   Short press: Volume decreases
   Long press: Previous track

4. Next track / Volume increase
   Short press: Volume increase
   Long press: Next track

5. Party lights
   Short press to enable/disable party lights

6. Play / Pause
   Play / pause playback.

7. Mode
   Press short to switch between Bluetooth, AUX-IN, and USB (if available).

8. αTWS
   Press and hold to pair a second HPG540BT speak

9. OFF / ON switch
   Long press to turn ON
   Press short to turn OFF

10. Battery indicator lights
    Shows the battery level (indication only)

11. USB port + DC input USB-C
    Plays MP3/WMA songs from a USB stick (32GB max)

12. AUX-in
    Optional wired connection with jack-to-jack cable (cable incl.)

13. Mic input
    1/4” (6,3mm) Jack plug input for external microphone(not included)

Wired microphone, sold separately model: HPG-MIC1
We are continuously improving/updating our products and product information. It’s, therefore, possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear; always check our website for the most current version.

Precautions

Points to observe for safe usage Read this manual carefully before using this device and its components. They contain instructions on how to use this product in a safe and effective manner. Caliber Europe BV cannot be responsible for problems resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Caliber Europe BV dealer for repair. Product cleaning. Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature.
Ensure that the ambient temperature is between 0°C and +45°C before turning on the device.
Maintenance
If you have problems, do not attempt to repair the device yourself. Return it to your Caliber Europe BV dealer for servicing.
Placement
Place the product on a flat surface. Provide enough space around the product for sufficient ventilation.
Heat
Do not locate the appliance in the vicinity of a heated surface or in direct sunlight. Voltage. Check the main voltage indicated on the adapter/product rating label in accordance to the local electricity supply, if it doesn’t, return the product to the store where you bought it.
Plug.
Remove the plug from the outlet, when the product is unused for a long period of time and during thunderstorms.
Replace battery
 The built-in rechargeable battery is not replaceable. Do not remove or replace the battery, do not throw in the trash or in the fire. Use only supplied charging adapter.
Below the descriptions of the features/options of the HPG 540BT, hereafter called “device”.. The numbers between the “(…)” refer to the key or connections on the device. The illustrations can be found in the front of this manual.
Power ON/OFF
Long press the power button (9) to turn ON
Short press to turn OFF
Battery charging
The device has a built-in rechargeable battery. The device is provided with a USB power cable. Use a USB adapter (included) and connect the adapter to the DC-in of the device (11). While charging, the indicators will light up. Charging time is 5 hours with the included adapter. The device will operate without the charging cable using the internal battery. The battery discharge depends on its use of it. E.G: Heavy, loud, bass music will use more energy to produce than the spoken word.
Bluetooth connection

• Turn ON the speaker.
• Use the [MODE] button (7) to select Bluetooth mode.
• Set your Bluetooth device to ‘Search’ using the devices’ Bluetooth menu.
• Choose ‘HPG540BT_CAL’ from the list.
• Select “HPG540BT_CAL” from the list. If necessary, confirm the pairing with the access key: “0000”.
• When the devices are paired successfully, a sound will be heard and you can start playing music on your device. If your device supports AVRCP you can use the buttons on this device to control the playback.

Playing from USB-stick

• Turn the speaker ON.
• Insert a USB stick into the slot (11), and the stored music will be played automatically.
• While playing, press [-] or [+] (3/4) to select the previous or next song.

Note: Under Bluetooth or AUX-in mode, if a USB is inserted it will automatically start playing. To return to the previous mode, use the [MODE] button.
AUX-IN:
You can connect an external device e.g. MP3 player to the AUX-in (12) of this device using a jack-to-jack (cable included).

• When an external device is connected, The device will switch to Aux-in mode automatically.
•  Start playing music on your external device.
  Note: The playback control buttons on this device will not work in this mode.

TWS

1. Turn on two identical speakers you want to pair, please note they must have the same BT pairing name. Only need to set up one of the two devices.
2. Press TWS “ ” button (8), the speaker will make a tone to start pairing, and make a tone again once successfully paired.
3. Make a Bluetooth connection with your mobile phone to play music by the two paired Speakers to create a more powerful surround sound effects.
4. When you want to exit the TWS mode, press TWS “button again to exit the TWS function.
   Note: 1. Users need to make a TWS connection first, then make a Bluetooth connection with the mobile phone.
   2. Under TWS mode and Bluetooth connected, when user long press the TWS button, both the TWS connection and Bluetooth connection will be disconnected.

Remark: Under the TWS mode, if you connected your mobile phone to the device (you set at the beginning) via the provided audio cable, it will start to play AUX via the TWS function, under this status, you can not switch to Bluetooth mode by pressing the Mode button.

Old appliances and/or batteries must not be disposed of with garbage! If the device/battery can not be used anymore, every user is legally obliged to dispose of old appliances and/or batteries separated from the garbage, e.g. at a collection point of his municipality/district.
APPAREIL ET
EMBALLAGES A TRIER Pour en savoir plus : www.quefairedemesdechets.fr
Caliber hereby declares that the device HPG 540BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU RED, 2009/125/EC ERP and 2011/65/EU RoHS.
The latest declaration form can be found at:
https://calibereurope.com/nlmedia/forms/DeclarationHPG540BT.pdf

WWW.CALIBEREUROPE.COM
CALIBER EUROPE BV
Kortakker 10
4264 AE Veen
The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>