Intenso W30C GaN Power Adapter User Manual
- June 15, 2024
- Intenso
Table of Contents
W30C GaN Power Adapter
User Manual
W30C GaN Power Adapter
Please read this manual carefully and observe and follow all the instructions mentioned in it to ensure a long service life and reliable use of the device. Keep this manual handy and pass it on to other users of the device.
SAFETY
Intended use
This product is a power adapter for supplying power to, for example,
smartphones, tablets, eBook readers, headphones, MP3 players and other USB-
enabled devices. It is intended for indoor use only and must not be used
outdoors. It may only be operated within the power limits specified in the
technical data. Be sure to observe the safety instructions for use. Any other
use or use beyond what is specified is deemed as not intended use and can lead
to damages and injuries. This product is not intended for commercial use or
for medical and special applications, where the failure of the product can
cause injuries, mortalities or considerable material damages. Claims of any
type for damages resulting from use other than for the intended purpose or
non-observance of the safety instructions are excluded.
The firmware and/or hardware may be changed at any time without prior notice.
For this reason it is possible that parts of these instructions, technical
data and images in this documentation differ slightly from the product in your
possession. All points described in these instructions only serve the purpose
of clarification and must not inevitably correspond to a certain situation.
Legal claims cannot be made on the basis of these instructions.
Safety information
Dangers for children and persons with restricted physical, sensory or mental
abilities Children often underestimate dangers or do not recognise them at
all. This device is not intended to be used by persons (including children)
with restricted sensory, physical or mental abilities or lack of experience
and/or knowledge, unless they are supervised by a person responsible for their
safety or received instructions from the person on how to use the device and
they have understood the resultant dangers. Unsupervised children should not
have access to the device. Make sure that children do not play with the
device.
Danger of asphyxiation!
Children can put the packaging film or small parts in their mouths and choke
on them.
Risk of injury!
Use the product only in accordance with its intended use and in compliance
with all safety instructions and within the technical performance limits.
Failure to do so may result in danger to life due to electric shock! Do not
attempt to open the device. It does not require maintenance and must not be
repaired independently. The warranty will be voided in this case. If the
device is damaged, do not continue to use it under any circumstances to avoid
possible injury! Also prevent other people from using the defective device.
Never connect or disconnect the device from the mains socket with wet hands!
This could cause an electric shock and endanger your life! Do not simply
disconnect a damaged device from the mains socket! Make sure beforehand that
the mains supply is disconnected, for example by removing the fuse, in order
to avoid a life-threatening electric shock! Do not insert any objects not
intended for use into the openings of the device. This could result in life-
threatening injuries due to an electrical short circuit and/or a resulting
fire. Before use, check that the device is suitable as a power adapter for the
product to be connected. If it is not, do not use it to avoid injury and
damage due to, for example, a short circuit.
Damage!
Keep the device away from any type of moisture and avoid dust, heat and direct
sunlight. Do not use it in the immediate vicinity of heat sources such as
radiators.
Do not apply pressure to the housing, and use the product only if there is
sufficient space for operation. Avoid vibrations and do not drop the product.
Do not place containers filled with liquids (vases, glasses, etc.) on the
device or in its immediate vicinity. There is a risk that the container will
tip over and the liquid will affect the electrical safety. To remove the
device from the mains plug, always pull directly on the device and not on the
cable.
Do not use water or chemical solutions to clean the device, use only a dry
cloth. If the device is brought from a cold room to a warm room, do not use it
immediately. Condensation could occur, which may cause damage. Let it come to
room temperature first after a reasonable period of time.
General safety instructions
Lay connected cables so that they do not pose a tripping hazard. Do not use
damaged cables and do not crush or bend them.
Always use easily accessible mains sockets and disconnect the device from the
power supply as a precaution in the event of a thunderstorm.
When using a multi-plug socket, make sure that the total permissible
electrical power consumption is not exceeded.
If the device will not be used for a longer period of time, please disconnect
it from the mains. To avoid malfunctions, please also observe the operating
instructions and safety instructions of the devices that are connected to the
device.
CE marking says that this product meets the requirements of all EU Directives
applicable for this product.
** The UKCA marking says, that this product meets the requirements of all
UK Directives applicable for this product.
SCOPE OF DELIVERY**
- Intense Power Adapter W30C Gann
- Operating Instruction
Please check whether the contents of this package are complete and undamaged. If this is not the case, please contact the seller or our service department: rma@intenso-international.de
USER GUIDELINES
Product overview
- USB-C output
- EU connector
Operation
Before use: The device can be used worldwide due to the supported mains
voltage of 100 – 240 volts. Please note that a country-specific adapter may be
necessary.
Before connecting, check whether the connected device is suitable for this
power adapter. Pay particular attention to the required power in the operating
manual of the device to be connected and also observe the instructions given
there before using this power adapter. Information about the power limits of
this product can be found in the technical data of this operating manual. Make
sure that you have followed all the instructions in this manual.
Connecting the device:
Plug a suitable USB cable first into the device to be connected and then into
the USB port of this device. Then plug the power adapter into the mains
socket. The connected device should now be properly powered. If you are
charging a device with a rechargeable battery, disconnect the device from the
power supply again when it is fully charged. If you are using a product
without a battery, disconnect the device from the power supply when it will
not be used for a long period of time.
Attention: This device supports Power Delivery (PD), PPS and QC for fast
charging. No manual settings are required; the standards automatically
negotiate the voltage and power between the devices if the connected device
also supports one of the standards. Due to the large number of different end
devices that support these standards, there may be restrictions in the
function, especially if the devices are already older and no longer have the
latest software, and the connected device may only be charged normally.
Please also note that the cable you use must also support the desired fast
charging standard and the higher power output. A 20 V / 3 A cable is required
for power outputs up to 60 watts and a 20 V / 5 A cable for higher power
outputs up to 100 watts.
DISPOSAL
Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Directive
2012/19/EC. All electrical appliances and old electrical appliances must be
disposed of separate from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities. You avoid
environmental damage with the proper disposal of old electrical equipment.
Packaging:
Packaging is raw material. The packaging material of this product is suitable
for recycling and can be reused. Please follow local recycling regulations
when dis- posing of any materials.
OPERATING CONDITIONS
Use the device at temperatures between 5 and 40 degrees Celsius and up to a
maximum altitude of 2000 m above sea level. If you do not plan to use the
device for a long time, store it between -20 to 65 degrees Celsius and charge
it approximately every three months to maintain full performance. Use and
store at a humidity that is between 10% and 90%.
TECHNICAL DATA
| Model designation: | W30C GaN |
|---|---|
| Dimensions (W/H/D): | 35,92 x 68,2 x 32,2 mm |
| Weight: | 50,8 g |
| Input voltage: | 100 — 240 Volt |
| Input alternating current frequency: | 50 / 60 Hz |
| Output voltage: | Supports (backwards compatible) PD 3.0, PPS and QC 4.0 |
5,0 V/DC 3,0 A, max. 15 watts 9,0 V/DC 3,0 A, max. 27 watts 12,0 V/DC 2,5 A,
max. 30 watts 15,0 V/DC 2,0 A, max. 30 watts 20,0 V/DC 1,5 A, max. 30 watts
PPS:
3,3 — 11,0 V/DC 3,0 A, max. 30 watts
3,3 — 16,0 V/DC 2,0 A, max. 30 watts
Average efficiency in operation:| 90,09%
Efficiency at low load (10%)| 81,22%
Power consumption at zero load’| <0,1 watts
References
- international.de - This website is for sale! - Hotels Resources and Information.
- Intenso – for everyday life - Intenso
- Intenso - for everyday life - Intenso
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>