CALIBER HCG01 Digital Alarm Clock Instruction Manual

June 2, 2024
CALIBER

 HCG 01 Red, White, Blue, Green

Manual

SPECIFICATIONS

Input:| 5,0V DC, 1A
!Please Use suitable adapter only!
---|---
Display:| Time, Date, Temperature
Automatic dimmer:| 50% Brightness from 19:00-06:00 hour
Dimensions:| 71(W) x 18(D) x 39(H)mm
Backup battery (for clock memory):| CR2023 – included (rear hatch)

We are continuously improving/updating our products and product information. It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear; always check our website for the most current version.

Precautions

Points to observe for safe usage
Read this manual carefully before using this item and its components. They contain instructions on how to use this product in a safe and effective manner. Caliber Europe BV cannot be responsible for problems resulting from failure to observe the instructions in this manual.

Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Caliber Europe BV dealer for repairing.

Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

emperature.
Ensure that the ambient temperature is between 0°C and +45°C before turning on the device.

Maintenance.
If you have problems, do not attempt to repair the unit yourself. Return it to your Caliber Europe BV dealer for servicing.

Placement.
Place the product on a flat surface. Provide enough space around the product for sufficient ventilation.

Heat.
Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.

Power supply
!Please Use suitable adapter only!

T

1. SET Key (SET) Pressing this button will switch to different items, in order: time-calenar-temperature-alarm 1 status, alarm 2 status, alarm 3 status.

Long press (3 sec) In time display mode, it will enter the time setting mode. In calendar display mode, calendar settings will be entered. In the setting mode, the content will be flashing. Press buttons 2 and 3 to set the value. Press the SET (1) button again to the next item.
Time setting sequence: time system (12 or 24h), hour, minute, exit
Calendar setting sequence: year, month, day, exit
In the setting mode, the setting will be automatically exited after 15 seconds without pressing any key.

2. Display mode selection
The LED clock has three display modes. You can select different display modes by pressing button 2. There are three types: DP-1, DP-2 and DP-3.
DP-1: Time is displayed for 10 second, then date is displayed for 2 seconds, then temperature is displayed for 2 seconds (continuously)
DP-2: The display will remain in the choice you made with SET (1) button. If you choose time, it always will show time, if you choose temperature, it always will show temperature.
DP-3: When the time is displayed, press SET (1) to switch to any display item. After the product is not operated,15 seconds will be automatically converted to time display. For example, switching to the temperature will be converted to a time display after 15 seconds.

3. Display time selection
Press button 3 to select.
oN Sd = The display will power off after 15 seconds. Pressing any button will activate the display again for 15 seconds.
` –Sd = Display always on

Night mode:
The display will reduce brightness automatically between 19:00-06:00h (about 50%)

Alarm settings:
Press the SET (1) button to switch to the status display of the alarm (1 or 2 or 3). Press button 2 to turn the alarm function on or off. When it is turned on, it is displayed as oN:A1 or oN:A2 or oN:A3, corresponding to 3 alarm clocks. Appears as–:A1 or –:A2 or —:A3 when the alarm is turned off.
When the status of alarm 1 or 2 or 3 is displayed, press and hold SET (1) for more than 3 seconds, it will enter the corresponding alarm 1 or 2 or 3 time setting. In the setting mode, the content will be flashing to display the prompt, single Press buttons 2 or 3 to set the value. In the setting mode, press the SET button to switch to the next item. Alarm time 1 or 2 or 3 time setting item sequence: alarm hour →alarm minute →exit.
In the setting mode, the setting will be automatically exited after 15 seconds without pressing any key. Alarm clock and stop mode.
When the status of alarm 1 or 2 or 3 is set to on, the product will beep to prompt for 1 minute on the set time. Press any button in the 1 minute prompt to stop the alarm.

Back up battery
Insert 1 CR2032 battery (included) into the battery compartment. In the event of a power interruption or if unplugged, your time settings will be saved for a short period of time.

Note: The alarm clock does not work on batteries only

Old appliances and/or batteries must not be disposed with garbage!
If the device/battery can not be used anymore, every user is legally obliged to dispose of old appliances and/or batteries separated from the garbage, e.g. at a collection point of his municipality/district.

WWW.CALIBEREUROPE.COM
CALIBER EUROPE BV · Kortakker 10 · 4264 AE Veen · The Netherlands

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals