anslut 015305 Heat Fireplace Fan Instruction Manual
- June 4, 2024
- anslut
Table of Contents
Item no.015305
STOVE FAN
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
| 
---|---
SAFETY INSTRUCTIONS
- Place the product on a level and stable surface.
- Check that the fan blades are assembled correctly before use. Tighten using a hex key, if necessary.
- Never place the product on unprotected surfaces, especially when it is hot, it may damage the surface. Check that the stove fan handle is in the vertical position before putting it on the stove. Store out of the reach of children. Keep the machine under careful supervision when it is used by children, or near children or pets.
- Never leave the product unattended when running.
- The stove fan gets hot when in use — risk of bum injuries. Always use the handle to more the fan, and do not touch the base of the stove fan. Never attempt to cool the fan quickly, for example by immersing it in water —this will damage the fan.
- Never insert fingers, pens or other objects in the fan.
- Keep your hair, and clothing. jewelry and similar objects away from moving parts.
- Carry the product by the handle.
- Avoid dropping the product and do not expose it to knocks and blows — the risk of material damage. Use a suitable thermometer to check that the temperature above the stove does not exceed 300 °C.
- The warranty does not cover damage caused by overheating.
SYMBOLS
Explanation of the symbols used on the product.
Recycle a discarded product in accordance with applicable regulations for
electrical waste.
DESCRIPTION
- Hondle
- Fon block
- Hex screw
- Foot FIG. 1
The stove fan does not run on the mains or batteries; it uses the heat from the stove or cooker. The unique design of the fan gives stable and silent operation.
TECHNICAL DATA
| Dimensions | W 160 x H 225 x D8.5mm |
|---|---|
| Operating temperature | 60-300 °C |
USE
INTENDED USE
The stove fan is intended to be used on top of free-standing stoves and
cookers with a normal surface temperature of 60-300°C to save fuel and enable
the efficient distribution of heat in the room. If the surface temperature
exceeds 300 °C, move the fan to a position on the stove or cooker that has a
lower temperature, this is to prevent damage to the fan. Use a thermometer
designed for high temperatures.
POSITIONING
Place the fan on top of the stove in such a way that cool air is drawn over
the cooling fins. Do not place the fan on the front of the stove or
immediately in front of the chimney. FIG. 2
JULA AB, BOX 363, SE-532 24 SKARA
2022-02-10
© Jula AB
Documents / Resources
|
anslut 015305 Heat Fireplace
Fan
[pdf] Instruction Manual
015305, Heat Fireplace Fan, Fireplace Fan, Heat Fan, 015305, Fan
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>