unitronicAIR JL42531 Remote Control for Air Conditioners Instructions
- June 1, 2024
- unitronicAIR
Table of Contents
unitronicAIR JL42531 Remote Control for Air Conditioners
Instant Search By Brand
Note:
The air conditioner must be switched off. If it is switched on, turn it off
manually.
- Hold down the button corresponding to the brand as shown in the following table for at least 8 seconds, until the conditioner lights up; release the button.
Direct Code Entry
Note:
The air conditioner must be switched off. If it is switched on, turn it off
manually.
- Look for the air conditioner brand in the code table.
- Keep the key pressed for at least 3 seconds until the code on the remote control display starts flashing; release the key.
- Press the TEMP+ and TEMP- keys to display the first code found in the table and press the 0K key.
- Check that all functions are performed correctly, if not, try another code by repeating steps 2 and 3.
Clock
Press and hold the CLOCK button for at least 3 seconds until the time on the display starts flashing; release the key. Use the TEMP+ and TEMP- keys to set the current time. Press the CLOCK key to confirm.
Timer On/Off
- Note: This function is available only for the conditioners that have it on the original remote.
- Press the TIMER ON or TIMER OFF buttons, the timer indicator is displayed and the conditioner is now in the timer state.
Contact Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>