Gem Group 101520-231B Auden Bamboo Bluetooth Speaker Instruction Manual

101520-231B Auden Bamboo Bluetooth Speaker
Instruction Manual

Auden Bamboo Bluetooth Speaker
IC ID: 21530-101520
FCC ID: 2AGR4-101520

Overview

1. Power ON/OFF / Play/pause
2. Next track/Vol +
3. Previous track/ Vol
4. Charging and Bluetooth LED indicator
5. Micro USB input
6. RESET
7. Aux input

Specifications

Bluetooth specifications: Bluetooth version 5.0
Transmission distance: up to 10m (This may vary based on environmental factors or the type of Bluetooth device being used )
Product dimensions:878780mm
Battery capacity: 3.7V/1800mAh 6.66Wh
Input: DC 5V / 1A
Speaker power4 5W*1
Frequency80-18KHZ
Input5V / 1A
Playback time4 Hours
Charging time2.5 Hours

PACKING LIST

• Bluetooth® Speaker
• USB Charging Cable
• User Manual

Operation Instructions

1. Power On Press and hold the Power On/Off button for more than 3 seconds to turn on the speaker. The indicator light will turn blue and you will hear a beep.
2. Pairing: Once the speaker is turned on, using your mobile device, search for Bluetooth devices and select Bluetooth ID ‘GEMLINE SPKR’. The speaker will pair automatically.
3. Power Off Press and hold the Power On/Off button for more than 3 seconds to turn off the speaker.
4. Play/Pause: When listening to music, press once to play/ pause music.
5. Next track/Vol +: Press and hold to change the music to the next track. Quickly press to increase volume.
6. Previous track/Vol -: Press and hold to change the music to the previous track. Quickly press to decrease volume.
7. AUX: Plug a 3.5mm audio cable into the back of the speaker in order to play music from a non-Bluetooth-enabled device. 3.5mm audio cable not included.
8. Charging: To charge the speaker, plug the included USB cable into an adapter (adapter not included). The LED indicator light will display a solid red light when charging. When fully charged, the red indicator light will turn off.

Attention:

1. Please enjoy music at an appropriate volume, which will avoid damaging your hearing and sound system.
2. Please avoid exposure, rain, and water droplets, and avoid prolonged exposure to high temperature, high humidity environments.
3. During use, please make it away from heat, and high pressure, and prevent children from playing with this product.
4. When the music volume becomes smaller or distorted, slow, or silent, may indicate that the lithium battery power is shortages, and need to be charged.
5. Please use the power which meets the requirements.
6. Do not drop or bump and applied heavy pressure to avoid damage to the product.
7. Please do not disassemble the product to avoid danger.
8. Long-term not using, please turn off the power and unplug the charger power cable.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver..
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>