Numatic HFS 1015/1023 Floor Polisher Electric Instruction Manual

: June 13, 2024
: Numatic

Numatic HFS 1015/1023 Floor Polisher Electric Instruction Manual

Assembling the Machine

Fitting the Brush

Tipping the Handle

Operating the Machine

HFT 1530 Twin Speed

Low Speed = 150 rpm

High Speed = 300 rpm

Cable Release

Cable Storage

Rating Label

Company Name & Address
Voltage Frequency
Power rating
Machine Description
Splash Proof Rating
WEEE Logo
CE Mark
Weight (ready to use)
Machine yr/wk Serial number

PPE (personal protective equipment) That may be required for certain operations.

Ear Protection
Safety Footwear
Head Protection
Safety Gloves
Eye Protection
Protective Clothing
Dust / Allergens Protection
Hi Viz Jacket
Caution Floorsign

NOTE:
A risk assessment should be conducted to decide what PPE should be worn.

Safety Critical Components

Mains Lead

HO5VV-F x 15M x 3 x 1.5mm²

WEEE Legislation

Floor Machine, accessories and packaging should be sorted for environmentally – friendly recycling

Only for EU countries:

Do not dispose of Floor Machine into household waste! According to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment and its incorporation into national law. Floor Machine that are no longer suitable for use must be separately collected and sent for recovery in an environmentally – friendly manner.

Floor Machine Maintenance Guidelines

Daily

Keep the machine clean. Ensure brushes/ pads are in good condition. Check for any worn or damaged parts and replace immediately. Do not leave your machine standing on brush, pads or drive boards when not in use.

Weekly – as daily and:-

Regularly examine the power cord.

ORIGINAL INSTRUCTIONS Read the instruction manual before using the appliance

Information for Floor Machines

CAUTION
This Product meets the requirements of IEC 60335 – 2-67 This Machine is also suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, rental businesses and offices for other the normal housekeeping purposes. Care should be taken in the choice of chemicals, detergents and other liquids. Consult your supplier.

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge. Unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety

Do’s and Don’ts:

DO Ensure only competent persons unpack/ assemble the machine.
DO Keep your machine clean.
DO Keep your brushes in good condition.
DO Replace any worn or damaged parts immediately.
DO Daily examine the mains lead for damage, such as cracking or ageing. If damaged is found, replace the lead before further use.
DO Only replace the mains lead with the correct Numatic approved replacement part.
DO Ensure that the work area is clear of obstructions and/ or people.
DO Ensure that the working area is well illuminated.
DO Pre – sweep the area to be cleaned.
DON’T Use steam cleaners or pressure washers to clean the machine or use in the rain.
DON’T Attempt machine maintenance or cleaning unless the power plug has been removed from the supply outlet.
DON’T Allow any inexperienced repairs. Contact your nearest service centre.
DON’T Strain the mains lead or try to unplug by pulling on the mains lead.
DON’T Expect the machine to provide trouble free, reliable operation unless maintained correctly.
DON’T Run the machine over any power cables during operation.
DON’T Leave your machine standing on brush, pads or drive boards when not in use.

WARNING
Operators shall be adequately instructed on the use of this machine. This machine shall be disconnected from its power source (Remove plug from socket outlet.) During cleaning or maintenance or in the event of an accident and when replacing parts or converting the machine to another function.

This machine is not suitable for picking up hazardous dust. Do not allow supply cord to come into contact with the rotating brushes or pads As with all electrical equipment care and attention must be exercised at all times during its use, in addition to ensuring that routine and preventive maintenance is carried out Periodically in order to ensure its safe operation. Failure to carry out maintenance as necessary, including there placement of parts to the correct standard could render the equipment unsafe and the manufacturer can accept no responsibility or liability in this respect.

When ordering spare parts always quote the model number / serial number specified on the rating plate. This machine is for indoor use only. The machine is not to be used or stored outdoors or in wet conditions.

Don’t allow the machine to be used by inexperienced or unauthorised operators or without appropriate training. Only use brushed provided with the appliance or those specified in the instruction manual. The use of other brushes may impair safety. A full range of brushes and accessories are available for this product.

Only use brushes or pads which are suitable for the correct operation of the machine for the specific task being preformed.

It is essential that this equipment is correctly assembled and operated in accordance with current safety regulations. When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of the operator and any other persons who may be affected.

| Motor| Speed| Optional Vacuum| Brush| Pad| Range| Weight| Sound Pressure dB(A)@1.7M| HAV M/S2| Dimensions
---|---|---|---|---|---|---|---|---|---|---
HFS 1015| 1000W| 150rpm| DT 130| 400mm| 360mm| 32m| 26Kg| 64.6 dB(A)| 1.78| 1250x560x410mm
HFS 1023| 1000W| 230rpm| DT 130| 400mm| 360mm| 32m| 26Kg| 69.6 dB(A)| 2.35| 1250x560x410mm
HFM 1015| 1000W| 150rpm| DT 130| 450mm| 400mm| 32m| 26Kg| 64.7 dB(A)| 1.76| 1250x560x460mm
HFM 1023| 1000W| 230rpm| DT 130| 450mm| 400mm| 32m| 26Kg| 69.8 dB(A)| 2.33| 1250x560x460mm
HFM 1515| 1500W| 150rpm| DT 130| 450mm| 400mm| 32m| 32Kg| 66.6 dB(A)| 1.54| 1250x560x460mm
HFM 1515 (115V)| 1500W| 150rpm| N/A| 450mm| 400mm| 32m| 32Kg| 67.5 dB(A)| 1.45| 1250x560x460mm
HFM 1523| 1500W| 230rpm| DT 130| 450mm| 400mm| 32m| 32Kg| 69.0 dB(A)| 2.11| 1250x560x460mm
HFM 1530| 1500W| 300rpm| DT 130| 450mm| 400mm| 32m| 32Kg| 62.8 dB(A)| 1.78| 1250x560x460mm
HFM 1545| 1500W| 450rpm| DT 130| 450mm| 400mm| 32m| 32Kg| 70.4 dB(A)| 1.63| 1250x560x460mm
HFT 1530| 1000/1250W| 150/300 rpm| DT 130| 450mm| 400mm| 32m| 32Kg| 70.2 dB(A)| 1.04| 1250x560x460mm
HAV = Hand Arm Vibration (uncertainty 20%)

Spare Parts

MACHINE/ MODELS NO.s| MOTOR| GEARBOX| START CAP| RUN CAP| VOLTAGE RELAY| HANDLE RELAY
---|---|---|---|---|---|---
HFS 1015| 205201| 230206| 205088| 208651| 208582| 206575
HFS 1023| 205201| 230210| 205088| 208651| 208582| 206575
HFM 1015| 205201| 230206| 205088| 208651| 208582| 206575
HFM 1023| 205201| 230210| 205088| 208651| 208582| 206575
HFM 1515| 205202| 230206| 205088| 220897| 902715| 206575
HFM 1523| 205202| 230210| 205088| 220897| 902715| 206575
HFM 1530| 205202| 230209| 205088| 220897| 902715| 206575
HFM 1545| 205204| 230210| 205088| 220897| 902715| 206575
HFT 1530| 205205| 230206| 205088| 220897| 206824| 206575

Notes:

| | HFM Floorcare Accessories
---|---|---
FMA- 606890HFM Soloution Tank.(8ltrs)| FMA-606077:- HFM10Kg weight| FMA-606401:- 400mmPadLoc Drive Board
| |
FMA-606615:- HFMoptional spraytec Kit (1.5ltrs)| FMA-606202:- 450m UnionMix Polish Brush| FMA-606700:- 400mPorcupine Pad Holder
| |
FMA-606178:-HFM Dustrol Kit (DT 130) ( 850W)| FMA-606203:-450 Polyscrub Brush| FMA-60115:- 550mmUnion mix Polish brush
| |
FMA-606250:- HFMDust Filter Kit| FMA-606204:-450mm Nyloscrub Brush

Floor Machines Application Chart

| | Scarifying 4,5,6| Stripping 7| Shampoo 3| Spray Cleaning| Wet Scrubbing 2,8,9| Dry buffing 1,9| Light Spray Buff9| Low Gloss Polish 1| Medium Gloss Polish 1,9| High Speed Polish 9
---|---|---|---|---|---|---|---|---|---|---|---
HFS 1015| 1000W150rpm| | | | | | | | | |
HFS 1023| 1000W230rpm| | | | | | | | | |
HFM 1015| 1000W150rpm| | | | | | | | | |
HFM 1023| 1000W230rpm| | | | | | | | | |
HFM 1515| 1500W150rpm| | | | | | | | | |
HFM 1523| 1500W230rpm| | | | | | | | | |
HFM 1530| 1500W300rpm| | | | | | | | | |
HFM 1545| 1500W450rpm| | | | | | | | | |
HFT 1530| 1000/1250W 150-300rpm| | | | | | | | | |

Note: 10KG & 20Kg Weight, use only on standard speed machines for wet / dry scrubbing, vitrification and crystallisation.

HFT 1530 DRW-12031 06-11-12 (A01) (Floor Machine)

Floor Machine

HFS / HFM 1000W / 1500W DRW-11701 26-09-12 (A01) (Floor Machine)

Floor Machine

Declaration of Conformity

EU DECLARATION OF CONFORMITY

We hereby declare under our sole responsibility that the following equipment fulfils all the relevant provisions of the following EU Directives:

Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU

Machine Description: Floor Machine
Type: HFM, HFS, HFT HNS series

Manufactured by: Numatic International Limited

Relevant standards upon which conformity is declared include:

IEC 60335-1 2010 + National Deviations
IEC 60335- 2-67 2012
EN 55014-1:2006+A2:2011
BS EN 55014-2:1997+A2:2008
BS EN 61000-3-2:2006+A2:2009
BS EN 61000-3-3:2008
EN 62233:2008

A technical construction file for this equipment is retained at the manufacturer’s address under the authorisation of the following signatory:

Name:Allyn Boyes Position: Technical Manager

Signed:

Date: 20/04/2016

Numatic International Limited, Chard , Somerset.
TA20 2GB
www.numatic.co.uk

Numatic International

Warranty

Numatic International Limited warrant to the original purchaser that its products are free of defects in both material or workmanship for the period shown below:-

Homocare and Cloancaro Vacuum cleaners.. 2 Years
Rotary Floor Machines.. 2 Years
Twintec Auto Scrubber Dryer.. 1 Year
Vario Ride-On Scrubber Dryer.. 1 ‘Year 1600 hours
Mopping, Compacts, Combi and Servocare Products.. 1 Year
Individual Accessories and Spare Parts.. 6 Months

Note: This warranty expressly excludes consumable parts such as carbon brushes, floor brushes, mops, batteries etc, that are considered replaceable from time to time during the normal working life of the machine.

A. The warranty period commences from the dale the goods are purchased.
B. All warranty claims must be processed through the Deafer from whom the equipment was purchased. The Dealer will co-operate with the purchaser throughout the warranty claims procedure and will arrange any necessary repairs using genuine Numatic parts.
C. If the original Dealer Is no longer able to fulfil his obligations please contact Numatic International Limited with full details of the claim and proof of purchase so that this may be processed without delay.
D. Any warranty claim can only relate to the specific part that is proven to be at fault and for which a replacement will be supplied but cannot be extended to constitute a claim against the complete machine.
E. Numatic International will supply the Dealer with any warranty parts required. subject to the claim being validated, after return of the faulty items in accordance with Numatic International Limited’s General Conditions of Sale.
F. Claims will not bo accepted if they are the result of fair wear and tear, misuse or abuse of any kind.
G. No replacement will be given unless the appropriate evidence of the validity of the claim has been provided to the satisfaction of Numatic International Limited.
H. Numatic International Limited reserve the right to charge for any unnecessary work canted out as a result of an invalid claim.
I. No variation to this warranty may be made or Implied by any member of Numatic International Limited or its Dealers unless such variation is In writing and authorised by the Company