anslut 019919 Downlight LED for Retrofitting Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019919 Downlight LED for Retrofitting
SAFETY INSTRUCTIONS
Carefully read the instructions before use!
- Save them for future reference.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- Exceeding the permitted maximum voltage can damage the product, or reduce its life span.
- If the permitted maximum temperature is exceeded this can also damage the product, or reduce its life span.
SYMBOLS
| Read the instructions.
---|---
| Safety class II.
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated voltage | 230 V ~ 50 Hz |
|---|---|
| Output | 1.5 W |
| Protection rating | IP20 |
| No. of LEDs | 18 |
| Colour temperature | 2700 K |
| Luminous flux | 65 lm |
| Size | Ø 65 x 6 mm |
| Cord length Transformer – switch | 1500 mm |
| Cord length Switch – junction box | 500 mm |
| Cord length Junction box – LED disc | 1000 mm |
| Operating temperature | -20 to 40°C |
| Storage temperature | -20 to 45°C |
USE
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
INSTALLATION
**FIG. 1
**
DISMANTLING
-
Remove the ring with tweezers.
FIG. 2
-
Open the inner ring with tweezers.
FIG. 3
-
Open the second slot.
FIG. 4
-
Open the third slot and press loose the cover.
FIG. 5
-
Separate the outgoing wire from the circuit board by melting the solder with a soldering iron.
FIG. 6
-
Test the light source by connecting to 12 VDC.
**FIG. 7
**
Documents / Resources
|
anslut 019919 Downlight LED for
Retrofitting
[pdf] Instruction Manual
019919, Downlight LED for Retrofitting, Downlight LED, LED for Retrofitting,
019919, LED
---|---