Razor W13112163017, W13112144017 Power Core E90 Sprint Foot Platforms Replacement Instructions
- June 3, 2024
- Razor
Table of Contents
Razor W13112163017, W13112144017 Power Core E90 Sprint Foot Platforms
Replacement
Required Tools (Not included)
- A. 6 mm Allen wrench
- B. Phillips screwdriver
WARNING
To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to
follow these steps in the correct order may cause irreparable damage.
INSTRUCTION
Step 1
Using a size 6 mm Allen wrench, remove four (4) bolts from under the foot
platform (two (2) on each side). Slide the platform bracket
down.
Step 2
If replacing only the plastic platform, use a Phillips screwdriver to remove
four (4) screws on top of the platform (two (2) on each side). Lift the
plastic off from the bracket.
Step 3
Reverse the steps. ATTENTION : Charge battery 12 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00am – 5:00pm Pacific Time. 1