Razor W13113290049 Front Wheel Replacement Instruction Manual
- May 15, 2024
- Razor
Table of Contents
Razor W13113290049 Front Wheel Replacement
Required Tools
Required Tools: (Not included)
- A. Phillips screwdriver
- B. Two (2) 19 mm open wrenches
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before performing any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.
Installation Instructions
Step 1
- Using a Phillips screwdriver, remove four (4) screws from the front fork covers. Remove front fork covers and set aside.
Step 2
- Using two (2) 19 mm open wrenches, loosen the lock nuts from the axle. Slide the wheel down.
Step 3
Reverse the steps.
- Reposition the front fork covers and attach with the screws that were removed in Step 1.
ATTENTION: Charge battery 6 hours before using.
Contact
Need Help?
Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00 AM – 5:00 PM PST.
Read User Manual Online (PDF format)
Loading......