Razor Crazy Cart Instruction Manual

OWNER’S MANUAL

OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your unit and 19 character product I.D. with you before
contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code:

SAFETY WARNINGS

WARNING: The Crazy Cart is not the same as an “ordinary” go-kart and therefore may require greater skill to ride than
an ordinary go-kart. The Crazy Cart is designed to allow movement forward, backward, laterally, in drifting arcs and even to pivot
around in circles– and instead of a “conventional” brake, it uses these new features to also allow very quick stopping
and braking. It is extremely important to start out slowly, and take the time to get familiar and comfortable with the Crazy
Cart’s unique directional control and braking abilities (described on pages 8 and 9), before attempting quick turns or other fast moving
actions, or otherwise trying to make full use of the Crazy Cart’s capabilities. Using this product requires flat open space, free of
traffic or other obstacles.

WARNING: Riding any electric product can be a hazardous activity.
Certain conditions may cause the equipment to fail without fault of the
manufacturer. Like other electric ride-on products, the Crazy Cart can and is
intended to move, and it is therefore possible to lose control, fall off and/or
get into dangerous situations that no amount of care, instruction or expertise
can eliminate. If such things occur you can be seriously injured or die, even
when using safety equipment and other precautions.

RIDE AT YOUR OWN

WARNING: PARENTAL AND ADULT RESPONSIBILITY AND
SUPERVISION NECESSARY: This manual contains important safety
information. It is your responsibility to review this information and make
sure that all riders understand all warnings, cautions, instructions and safety
topics, and assure that young riders are able to safely and responsibly use
this product. Razor recommends that you periodically review and reinforce
the information in this manual with younger riders, and that you inspect and
maintain your children’s product to insure their safety.

WARNING: NOT FOR CHILDREN UNDER AGE 9 OR HEAVIER
THAN 140 LB (63 KG). Because products, like the Crazy Cart, can and
do present potential hazards plainly associated with their use, it is well
recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN
SELECTING RIDING PRODUCTS APPROPRIATE TO THE AGE OF A CHILD, OR
PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF VARIOUS
AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS IMPORTANT.
Not every product is appropriate for every age or size of child, and different
age recommendations are found within this category of product which are
intended to reflect the nature of the hazards and the expected mental or
physical ability, or both, of a rider to cope with the hazards.
Razor recommends that children under the age of 9 not be permitted to
use this product. This recommendation is based not just on age or weight
or height – it reflects consideration of expected maturity and skills as well
as physical size. The recommended rider age of 9 years or older is only an
estimate and can be affected by the rider’s size, weight or skills – not every
child 9 years old will be suited to the product. Certainly, any rider unable to
fit comfortably on the Crazy Cart should not attempt to ride it, but a parent’s
decision to allow his or her child to ride this product should be
based on the child’s maturity, skill, and ability to follow rules. Razor
emphasizes that adults are strongly advised not to disregard Razor’s
recommendations or permit younger children to ride the Crazy Cart.

DO NOT EXCEED THE WEIGHT LIMIT OF 140 lb (63 kg). Rider weight alone
also does not necessarily mean a person’s size is appropriate to fit or maintain
control of the Crazy Cart. Keep this product away from small children and
remember that this product is intended for use only by persons who are, at a
minimum, completely comfortable and competent while operating the product. Persons with any mental or physical conditions that may make them
susceptible to injury, impair their physical dexterity or mental capabilities
to recognize, understand, and follow safety instructions, and to be able to
understand the hazards inherent in a product’s use, should not use or be
permitted to use products inappropriate for their abilities. Persons with heart
conditions, head, back or neck ailments (or prior surgeries to these areas of the
body), or pregnant women, should be cautioned not to operate this product.
NOTICE: This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your electric rideon
product. Because any incident can result in serious injury or even death,
we do not repeat the warning of possible serious injury or death each time
such a possibility is mentioned.
CHECK AND MAINTAIN CRAZY CART
Before use, check to confirm that any and all chain guards or other covers
and guards are in place and in serviceable condition. Check that the parts
are functioning properly, that the main driving tire is inflated properly and
has sufficient tread remaining. The Crazy Cart should be maintained and
repaired in accordance with the manufacturer’s specifications, using only the
manufacturer’s authorized replacement parts, and should not be modified from
the manufacturer’s original design and configuration. Replace worn or broken
parts immediately.
WARNING: SAFE OPERATION REQUIRES CAREFUL
ATTENTION. This product does not have a traditional brake – stopping
is done using the accelerator pedal and steering. Read “How to
Operate” section on pages 8 and 9 of this manual and practice to
develop skills in using the Crazy Cart.
Always check and obey any local laws or regulations which may
affect the locations where the Crazy Cart may be used. The Crazy Cart is
meant to be used on private property and on closed courses, and not on public
streets or sidewalks. Do not ride your electric product in any areas where
pedestrian or vehicle traffic is present.
Do not turn the power switch in the Crazy Cart to ON or depress/activate the
accelerator pedal unless you are seated and in a safe, outdoor environment
suitable for riding. Always turn the power switch to OFF before exiting the
Crazy Cart.
Keep your fingers and other body parts away from the drive chain, steering
system, wheels and all other moving components.
Maintain a hold on the steering wheel at all times.
Ride defensively. Watch out for potential obstacles that could catch your
wheel(s) or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, scooters, bikes, children or animals who
may enter your path, and respect the rights and property of others.

SAFETY WARNINGS

This product was manufactured for performance and durability, but is not
impervious to damage. Bumping into obstacles or other aggressive riding can
overstress and damage any product, including the Crazy Cart, and the rider
assumes all risks associated with high-stress activity. This product is not a
“bumper car.”
Never carry passengers or allow more than one person at a time to ride the
electric product.
Never use headphones or a cell phone when riding. Never hitch a ride with
another product.
Do not ride the Crazy Cart in wet or icy weather and never immerse this
electric product in water, as the electrical and drive components could get
damaged by water or possibly create other unsafe conditions.
Wet, slick, bumpy, uneven or rough surfaces may increase risks. Do not ride
this electric product in mud, ice, puddles or water. Avoid excessive speeds
that can be associated with downhill rides. Never risk damaging surfaces,
such as carpet or flooring, by using an electric product indoors.
Never use near steps or swimming pools.
Do not ride at night or when visibility is limited.
Do not touch the electric motor on your product when in use (or after using) as
it can become very hot.
You may see people on TV or videos performing stunts and trick maneuvers
on the Crazy Cart. These are people who have been practicing a long time and
who accept the risks of trick riding. Do not assume that you can attempt to do
the same tricks without great risk.
Be careful and know your limitations. Risk of injury increases as the degree
of riding difficulty increases. The rider assumes all risk associated with
aggressive riding activities.

PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled). A helmet may be legally required by local
law or regulation in your area. Elbow pads and kneepads, a long-sleeved shirt,
long pants and gloves are recommended. Always wear athletic shoes (lace-up
shoes with rubber soles), and keep shoelaces tied and out of the way of the
wheels, motor, and drive system. Never ride barefooted or in sandals.
USING THE CHARGER
The charger supplied with the Crazy Cart should be regularly examined for
damage to the cord, plug, enclosure and other parts. In the event of such
damage, the Crazy Cart must not be charged until the charger has been
repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from Crazy Cart when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
Crazy Cart with damp cloth.

FAILURE TO USE COMMON SENSE AND HEED THE WARNINGS INCREASES RISK OF SERIOUS INJURY.
USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.

BEFORE YOU BEGIN

TURN POWER SWITCH OFF BEFORE CONDUCTING ANY ASSEMBLY OR MAINTENANCE PROCEDURES.
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
Because the Crazy Cart was 99 percent assembled and packed at the factory, there should not be any problems, even
if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult.
Allow up to 5 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge.

WARNING:
DO NOT USE NON-RAZOR PARTS WITH YOUR CRAZY CART.
The Crazy Cart has been built to certain Razor design specifications.
The original equipment supplied at the time of sale was selected on the
basis of its compatibility with the frame and all other parts. Certain
aftermarket components may not be compatible. Use of non-Razor parts
will void the warranty.

Product ID Locations:
(See locations to the left)

1. Front of Frame
2. Seat
3. Charger
4. Box (Not Shown)

Plastic Bag Contents:

• Charger
• Tools (DLX Model Only)
• Owner’s Manual

Tools Required (Included – DLX Model Only)

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.

ASSEMBLY AND SET-UP

Turn power switch off before conducting any maintenance procedures.

Attaching the Steering Wheel (DLX model only)
Tool Required: 6 mm Allen Wrench

1. Remove the protector from the steering fork. Insert the steering wheel into the steering fork making sure to align the
   groove on the steering wheel (A) with the groove on the steering fork (B). Push steering wheel all the way down.

2 Using a 6 mm Allen wrench, tighten the steering bolt to secure the steering wheel in place.

WARNING:
Failure to properly tighten the
steering bolt may allow the steering
wheel to dislodge while riding and
may cause you to lose control.

ASSEMBLY AND SET-UP

Adjusting the Seat
Tool Required: 5 mm Allen Wrench

1 Using a 5 mm Allen wrench, remove the four (4) bolts attaching the seat.

2 Move the seat to the desired position and securely tighten the four (4) bolts to the frame.

Inflating the Tire
Tire is inflated when shipped, but it will invariably lose some pressure between the point of manufacturing and your
purchase. Before initial use: Using a bicycle style tire pump equipped for a Schrader-type valve, inflate the front tire
to the correct PSI indicated on the sidewall of the tire.

WARNING:
Do not overinflate, as this could damage tire or wheel.
Note: The pressurized air supplies found at gasoline stations are
designed to inflate high-volume automobile tires. If you decide to
use such an air supply to inflate your Crazy Cart tire, first make sure
the pressure gauge is working, then use very short bursts to inflate to
the correct PSI. If you inadvertently overinflate the tire, release the
excess pressure immediately.

CHARGING THE BATTERY

Your Crazy Cart may not have a fully charged battery; therefore you must charge the battery prior to use.

• Initial charge time: 12 hours.

• Recharge time: up to 12 hours, even if the light
  turns green. Recommended maximum charging time
  is 24 hours.

• Always charge the battery immediately after riding.

• Fully charge battery before storing for extended
  periods of time.

• Unplug charger from the wall outlet when not in use.

• Failure to recharge battery periodically may result in a
  battery that will not accept a charge.

• Make sure the power switch is turned OFF when
  unit is not in use. If the power switch is left on for an
  extended period of time, the battery may reach a stage
  at which it will no longer hold a charge.

• To ensure long battery life, never store the product in
  freezing or below freezing temperatures! Freezing will
  permanently damage the battery.

• Run time: Up to 40 minutes of continuous ride time.
  Run time may vary depending on riding conditions,
  rider weight, climate, and/or proper maintenance.

• Battery life can vary depending on proper maintenance
  and usage of the unit.

Note: Make sure power is turned
OFF when unit is not in use. If
the power switch is left on for
an extended period of time, the
battery may reach a stage at which
it will no longer hold a charge.

1 Plug the charger plug into wall
outlet. The light on the charger
should be green.
Note: If green light (LED) does not
turn on, try a different outlet

2 Plug the charger into the charger
port on the Crazy Cart. Make sure
the power switch is in the OFF
position. The light on the chargershould turn red during charging.
The light will turn green again when
charging is complete.

WARNING: Use ONLY
with the recommended charger.
Batteries are only to be charged
under adult supervision. The charger
is not a toy. Always disconnect the
charger before wiping down and/
or cleaning the Crazy Cart with a
damp cloth.
The charger supplied with the Crazy
Cart should be regularly examined
for damage to the cord, plug,
enclosure and other parts. In the
event of such damage, the Crazy
Cart must not be charged until it has
been repaired or replaced.
Chargers have built-in overcharge
protection to prevent battery from
being overcharged.
Note: If the charger gets warm
during regular use, this is a normal
response and is no cause for
concern. If your charger does not get
warm during use, it does not mean
that it is not working properly.
Wall outlet – Green (stand by)
Wall outlet and unit – Red (charging)
Wall outlet and unit – Green (charged)
Note: Continue charging unit even if
light turns green prior to 12 hours.
WARNING: Failure to
recharge the battery at least once a
month may result in a battery that
will no longer accept a charge.

PRE-RIDE CHECKLIST

Wheels/Tires

Practice drift riding only in wide open areas clear from curbs,
parking blocks and other obstacles. Impacting the wheels
against any hard surface can damage the wheels. Wheels are
not covered under your limited warranty.

Frame, Fork and Steering Wheel

Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck and bend or break a frame. Get in the habit
of inspecting your Crazy Cart on a regular basis.

Hardware/Loose Parts

Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled correctly.
There should not be any unusual rattles or sounds from loose
parts or broken components. If the unit is damaged, do not ride.
Reference “Safety Warnings” on pages 1 and 2 of
this manual.

Safety Gear

Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
athletic shoes (lace-up shoes with rubber soles) and keep shoelaces
tied and out of the way of the wheels, motor and drive system.
NEVER RIDE BAREFOOTED OR IN SANDALS.

Laws and Regulations

Always check and obey any local laws or regulations.

Insurance

Do not assume that your existing insurance policies necessarily
provide coverage for electric product use. Check with your
insurance company for information regarding insurance.

HOW TO OPERATE THE CRAZY CART

Before you ride this exciting product, take the time to learn about how it moves the way it moves. Start out slowly.
With practice and care, you must familiarize yourself with these riding hints and tips so that your experiences with the
Crazy Cart will allow you to maximize fun while keeping in control.
Never turn the Power Switch to ON before sitting down in the driver’s seat ofthe Crazy Cart. By getting yourself situated before turning the power ON , you
won’t risk losing your balance by pushing the accelerator pedal while standing
as you get into (or out of) the Crazy Cart. Always turn the Power Switch to
OFF before exiting the Crazy Cart.

Important Control Features:
Accelerator Pedal, Steering Wheel and Drift Bar

The Crazy Cart allows really creative drifting, spinning and turning that no ordinary go-kart can do. If you have ridden
a Razor RipStik® or a Razor RipRider® 360, think about those caster wheels and how they allow rapid changes of
direction; or how a Razor Ground Force® Drifter™ go-kart allows full speed rear-end drifting. The Crazy Cart builds on
these motions and adds even tighter turning possibilities through the fully rotational center motor and an adjustable
angling ability for the rear caster wheels. Practice with these Crazy Cart characteristics can lead to amazing fun, and
the importance of exercising caution and common sense when riding is – as with all moving products – important for
every rider.

Accelerator Pedal

The Crazy Cart has a foot pedal accelerator that controls the cart’s speed. This variable-speed accelerator allows you
to drive the cart at a range of speeds from 0-12 MPH (0-19 km/h), depending on how much it is depressed. This ability
to dynamically speed up and slow down is a key to controlled drifting. All stopping should be preceded by releasing
any pressure on the accelerator pedal.

Steering Wheel

The Crazy Cart’s steering wheel is different from a normal car or cart in a number of ways. The most important thing to
remember about the Crazy Cart’s steering wheel is that the arrow on it points in the direction where the cart is going
to travel, regardless of how the rest of the cart is oriented. Simply point the arrow where you want the cart to go
(using the Drift Bar can change how the back of the Crazy Cart follows, as described below).

The Crazy Cart’s steering wheel is able to rotate more than 180° in each direction. The steering wheel has a “hard
stop” when it has reached the limit of its turning – it won’t keep going around all the way, but by turning fully one
direction or fully the other direction, you can ride the Crazy Cart backwards – and by turning at or near 90° the Crazy
Cart can go in a very, very tight circle (be careful to avoid losing control by turning so much as to risk becoming dizzy).
The steering configuration of the Crazy Cart’s integrated drive and steering mechanism is similar to what some might
call “shopping cart” design. It has no self-correcting camber or castering features (meaning the steering tube goes
straight up and down so the wheel doesn’t “align” itself on its own). Such steering might, in certain circumstances,
shimmy or vibrate a little — this is normal. Usually it is the result of an uncoordinated or adverse control condition. If
you feel a shimmy in the steering, a change of direction (“counter-steering”) and/or speed change helps re-establishsmooth control.

IMPORTANT: Always select
a riding area that is level, smooth,
dry, and completely free of traffic
or obstacles. DO NOT RIDE
AROUND CARS!

Riding Tip: Learning when to
push and when to let off of the accelerator pedal will improve your
ability to do spins, drifts, and tricks smoothly. The best way to learn
the Crazy Cart’s abilities is to try things at low speed.

WARNING: Excessive
duration or speed in spins can lead to loss of balance, loss of control
and tipping. Keeping one’s limbs and head tucked in tight to the
center of the Crazy Cart can reduce risks of tipping over, because
ergonomic forces can increase risk of tipping if the body is leaning
outwards and/or the spinning speed accelerates too greatly.
Take your foot off the accelerator pedal if spinning becomes too fast
to control, do not try to accelerate out of a spin. The Crazy Cart may
accelerate faster when lighter riders are on it, which is one
reason the minimum recommended age is 9. Be safety conscious!

HOW TO OPERATE THE CRAZY CART

Drift Bar for Adjustable Rear Casters
The rear wheels on the Crazy Cart are mounted on casters, like RipStik wheels. By altering the angle of the support for
these wheels, the Crazy Cart can either “track” in the same direction as the drive wheel is going or allow the rear end
to “drift” in response to turning or acceleration forces. The Drift Bar allows control between the two driving modes:
normal mode for straight tracking (down or default) and Crazy Cart mode for drifting (when the Drift Bar is pulled
up). When the Drift Bar is in the down position, the Crazy Cart will track in- line with the front wheel like a traditional
vehicle. As the Drift Bar is raised, it changes the angle of the rear casters and allows the rear of the cart to drift. The
more the Drift Bar is raised, the easier the cart drifts. When the Drift Bar is all the way up, the casters are in “Crazy
Cart mode.” The Crazy Cart can thus actually turn itself around in circles, and the size of the circle the cart will spin in
depends on how much, if any, the Drift Bar is pulled up. The higher the Drift Bar is, the tighter the circle the cart will
spin in.

In Crazy Cart mode, the frame is able to rotate any direction, regardless of the direction of travel. In the Crazy Cart mode
it is possible to drive in a straight line with the frame oriented any direction, including backwards and sideways. The
Drift Bar must be raised all the way up to travel backward in the Crazy Cart.
Spinning, Drifting and Stopping the Crazy Cart
The best use of the Crazy Cart involves careful coordination of the steering, the Drift Bar, and the accelerator. The
majority of spins and drifts that can be done in the Crazy Cart are accomplished by careful accelerator control. Learning
when to add or reduce power is the key to smoothly connecting tricks. Smooth riding also increases the run time
between charges. When first getting oriented with the Crazy Cart, it is highly recommended that riders carefully apply
the accelerator and take time to get familiar with the variable effects of the Drift Bar and steering at low speeds.
There is no separate brake on the Crazy Cart, but with practice it is easy to stop. Of course, removing your foot from
the accelerator will slow the cart down as a result of friction in the drive train. To stop the Crazy Cart’s forward motion
immediately, take your foot off of the accelerator and turn the steering wheel 90 degrees to either side. Removing
your foot from the accelerator and turning the steering wheel will result in the Crazy Cart spinning or drifting in
a circle and slowing to a stop. By turning the steering wheel 90° and taking your foot off the pedal, the rider can
immediately arrest forward motion and instead turn away. In this way, the Crazy Cart can avoid collisions and evade
things otherwise in its path.
For your safety, take the time to get familiar and comfortable with various combinations of accelerator, steering, and
Drift Bar applications to learn how to slow down and how using the Drift Bar affects stopping at slow speeds. Practice
these skills for maximum rider safety.
These basic steering exercises may help to familiarize riders with their Crazy Cart’s capabilities:
1. First steer in a circle with the Drift Bar down.
2. Do the same circles, but raise the Drift Bar to different heights, and note how the chassis reacts to drift
differently based on lifts and steering.
3. Practice bringing the Crazy Cart to a stop by turning 90° to the left or right– note how much more tightly
the Crazy Cart turns with the Drift Bar raised.
4. Practice staying “tucked in” in tight turns or spins.
WARNING: Recognize that these specialized riding features affect how the Crazy Cart functions and require
extra caution and attention to safe riding conditions and practices. Read and review the Safety Warnings on pages
1 and 2, and be extra careful with the Crazy Cart to avoid traffic, obstacles and downhill environments. This is not
a “bumper car” and is not designed to engage in collisions, jumping activities or for use on surfaces other than
hardened, smooth, flat and dry areas.

Riding Tip: With the steering wheel at 90°, the Crazy Cart will move in a circle using the rear inside caster as the “pivot point” if the Drift Bar is down — but will rotate around its center if the Drift
Bar is fully raised.

Riding Tip: (Crazy Cart Model Only)
The front stabilizing posts help to keep your Crazy Cart from tipping
when you are first stepping into the cart and when you turn too hard.

REPAIR AND MAINTENANCE

Turn power switch “OFF” before beginning repair or maintenance:

• Read the instructions

• Remove charger plug

• Turn the power switch off

• Secure the unit under repair

• Exercise caution around
  exposed parts

• Contact Razor customer service
  if unsure about any repair or
  maintenance

Front Wheel/Chain Replacement

Tools Required: Phillips Screwdriver, two (2) 16 mm Wrenches

1 Using a Phillips screwdriver,
remove the seven (7) screws on
the right side of the motor cover(side of the foot pedal throttle)and remove cover.

2 Using a Phillips screwdriver,
remove the three (3) screws
on the chain guard and remove
the chain guard.

3 Using two (2) 16 mm wrenches,
remove the locknuts on the front
axle bolt and slide axle bolt out
from the front wheel. Carefully
remove the chain from around the
wheel sprocket and remove wheel
from the front fork. If replacing the
chain, also remove the chain from
around the motor shaft. Install
replacement wheel/chain.

Rear Wheels/Rear Casters Replacement
Tools Required: 5 mm Allen Wrench, 22 mm Wre

1 Carefully turn unit over.
Using a 5 mm Allen wrench,
loosen coupling bolt and
remove wheel.

2 Install the wheel into the caster

3 To remove the caster, use a
22 mm wrench to loosen nut on the
caster and remove

WARNING: Failure to
properly install and tighten the
screws, nuts and bolts that affix the
steering wheel and seat can cause
you to lose control and crash.
Note: Front wheel hardware
sequence

Right Side (Throttle)
7-1 Locknut
7-2 Split Washer
Fork
7-5 Chain Guard Bracket
7-4 Spacer
Left Side
7-1 Locknut
7-2 Split Washer
7-3 Flat Washer
Fork
7-4 Spacer

WARNING: Failure to
properly adjust and tighten the screws, nuts and bolts that affix
the wheels can cause you to lose control and crash.
Note: Practice riding only in wide open areas clear from curbs,
parking blocks and other obstacles. Impacting the wheels against
any hard surface can damage the wheels. Wheels are not covered
under your limited warranty.

REPAIR AND MAINTENANCE

Battery Care and Disposal

Do not store in freezing or below freezing temperatures! To properly maintain your battery and ensure maximum
battery life, carefully read the “Charging the Battery” section on page 6 of this owner’s manual.

CONTAINS SEALED LEAD-ACID BATTERIES. BATTERIES MUST BE RECYCLED.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed leadacid
batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or
state approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota,
it is prohibited by law to throw away lead-acid batteries in the municipal waste stream.

Charger:
The charger supplied with the electric product should be regularly examined for damage to the cord, plug, enclosure
and other parts and in the event of such damage, the product must not be charged until it has been repaired or
replaced.
Use ONLY with the recommended charger.

Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically
inspect wheels for excess wear, and adjust and replace drive train components as required.

Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners.
For the complete selection of replacement parts visit shop.razor.com.

Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners.
For the complete selection of replacement parts visit shop.razor.com.

Repair Centers
For a list of authorized Razor repair centers:

• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.

In the US and Canada only:
For more information regarding recycling of rechargeable
batteries, call toll free 1-800-822-8837, or visit
http://www.call2recycle.org

WARNING: If a battery
leak develops, avoid contact with the leaking acid and place the
damaged battery in a plastic bag. Refer to the disposal instructions at
left. If acid comes into contact with skin or eyes, flush with cool water
for at least 15 minutes and contact a physician.

WARNING: Battery
posts, terminals and related accessories contain lead and
lead compounds. Wash your hands after handling.

TROUBLESHOOTING GUIDE

*Unit(s) should be turned off and fully charged prior to doing any Troubleshooting
NOTE: All troubleshooting steps should be performed by an adult only

For more troubleshooting tips, a list of available replacement parts or to locate an authorized Service Center in your area,
visit our website at www.razor.com or call toll free +1 866 467 2967 to speak to a live Customer Service Representative

CRAZY CART PARTS

Keep your product running for years with genuine Razor parts. Visit our website for more information on spare part availability.
(Specifications subject to change without notice.)

1. Steering Wheel                            10. Chain Guard         19. Stabilizing Posts
2. Headset (Upper/Lower)              11. Motor                   CRAZY CART DLX MODEONLY
3. Steering Fork                               12. Chain 20. Steering Wheel withBrodieKnob    4. Motor Cover (Right/Left)           13. Battery                  21. Front Caster Wheels
5. Front Wheel                                14. Flag 22. Vertical Drift Bar Extension
6. Accelerator Pedal                        15. Seat
7. On/Off Switch                          16. Drift Bar
8. Charger Port                              17. Rear Caster
9. Control Module                        18. Rear Wheels

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the

NOTICE: INSURANCE
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT. back of this manual.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance, could void the user’s authority to operate the equipment.

WARRANTY

Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase. This Limited Warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, storage or use of the Razor Crazy Cart.
This Limited Warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
• modified in any way;
• rented.
  The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
  Razor does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased.
  For your records, save your original sales receipt with this manual and write the serial number below.

CUSTOMER SERVICE CONTACT INFORMATION
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed below:

AMERICAS                         EUROPE, MIDDLE EAST, AFRICA      ASIA
Razor USA LLC                    Razor USA LLC (Europe) Razor USA LLC (Asia)
P.O. Box 3610                      Handelsweg 2 P.O. Box 3610
Cerritos, CA 90703              2742 RD Waddinxveen Cerritos, CA 90703
USA                                    Netherlands USA
+1 866 467 2967                +44 (0) 120 267 2702 +81 50 7579 6622
Monday – Friday                info@razoreu.com info@razor-asia.com
8:00 AM – 5:00 PM Pacific Time
customersupport@razorusa.com

DISTRIBUTED IN THE UK AND IRELAND BY:
Re:creation Limited
2 Meadows Business Park
Station Approach, Blackwater
Camberley, Surrey GU17 9AB
United Kingdom
+44 (0) 118 973 6222 Tel
+44 (0) 118 973 6220 Fax
sales@recreationltd.co.uk

Printed in China for Razor USA LLC.

DISTRIBUTED IN AUSTRALIA BY:
Funtastic Limited
Suite 2.01, Level 2
315 Ferntree Gully Road
Mount Waverley Vic 3149,
Australia
+1 800 244 543
info@funtastic.com.au

IMPORTED IN JAPAN BY B-PLUS
ASIA CORP.
Razor USA LLC
Kurokawa 3-1, Asaoku,
Kawasaki, Kanagawa
215-0035 JAPAN
+81 (0) 44 328 9067
info@razor-asia.com

Copyright © 2003-2019 Razor USA, LLC. All rights reserved. Razor® and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. Crazy Cart™ is a trademark of Razor USA LLC.

Crazy Cart™ & Crazy Cart™ DLX_2  Manual Optimized

Crazy Cart™ & Crazy Cart™ DLX_2  Manual Original

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>