Razor DIRT Quad User Manual

User Manual

OWNER’S MANUAL

Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.

NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.

Please have your product along with the 19 character product I.D. code with you
before contacting Razor for warranty assistance and/or replacement parts.

SAFETY WARNINGS

WARNING: Riding a four-wheeled electric product like the the Dirt Quad
does present potential risks and caution is required. Like any riding product,
the Dirt Quad has inherent hazards associated with its use (for example,
falling off or riding it into a hazardous situation). Like any riding product,
Dirt Quads can and are intended to move, and it is therefore possible to lose
control or otherwise get into dangerous situations. Both children and adults
responsible for supervising them must recognize that if such things occur, a
rider can be seriously injured or die, even when using safety equipment and
other precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.

WARNING: PARENTAL AND ADULT RESPONSIBILTY AND
SUPERVISION IS NECESSARY: Because products like this product, can
and do present potential hazards plainly associated with their use, it is well
recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN
SELECTING RIDING PRODUCTS APPROPRIATE TO THE AGE OF A CHILD, OR
PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF VARIOUS
AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS IMPORTANT.
Not every product is appropriate for every age or size of child, and different
age recommendations are found within this category of product which are
intended to reflect the nature of the hazards and the expected mental or
physical ability, or both, of a child to cope with the hazards.

The recommended minimum rider age is 8 and older. Any rider unable
to fit comfortably on the Dirt Quad should not attempt to ride it. A parent’s
decision to allow his or her child to ride this product should be based on
the child’s maturity, skill and ability to follow rules. Do not allow children
under eight (8) years old to ride the Dirt Quad.

Keep this product away from small children and remember that this
product is intended for use only by persons who are, at a minimum,
completely comfortable and competent while operating the product.
Persons with any mental or physical conditions that may make them
susceptible to injury, impair their physical dexterity or mental capabilities
to recognize, understand, and follow safety instructions and to be able to
understand the hazards, should not use or be permitted to use products
inappropriate for their abilities. Persons with heart conditions, head, back
or neck ailments (or prior surgeries to these areas of the body), or pregnant
women, should be cautioned not to operate such products.

DO NOT EXCEED THE WEIGHT LIMIT OF 120 lb (54 kg). Rider weight
does not necessarily mean a person’s size is appropriate to fit or
maintain control of the Dirt Quad.
CHECK AND MAINTAIN PRODUCT CONDITIONS
Before use, check to confirm that any and all chain guards or other
covers and guards are in place and in serviceable condition. Check that
the brake is functioning properly, and that tires are inflated properly and
have sufficient tread remaining. The product should be maintained and
repaired in accordance with the manufacturer’s specifications, using
only the manufacturer’s authorized replacement parts, and should not
be modified from the manufacturer’s original design and configuration.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations which may
affect the locations where the Dirt Quad may be used.
Ride defensively. Watch out for potential obstacles that could catch your
wheel(s) or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, scooters, bikes, children or animals who
may enter your path, and respect the rights and property of others.
The Dirt Quad is meant to be used on private property and on closed courses
and not on public streets or sidewalks. Do not ride your electric four wheeler
in any areas where pedestrian or vehicle traffic are present.
Do not activate the speed control on the hand grip unless you are on the
electric four wheeler and in a safe, outdoor environment suitable for riding.

The normal powered max speed of this product will be approximately 8 mph
(13 km/h), which can be affected by conditions, such as rider weight, inclines
and battery charge level. Avoid excessive speeds that can be associated with
downhill rides.
This product was manufactured for performance and durability, but is not
impervious to damage. Jumping or other aggressive riding can overstress and
damage any product, including the Dirt Quad, and the rider assumes all risks
associated with high-stress activity.
Be careful and know your limitations. Risk of injury increases as the degree
of riding difficulty increases. The rider assumes all risk associated with
aggressive riding activities.
Maintain a hold on the handlebars at all times.
Never carry passengers or allow more than one person at a time to ride the
electric four wheeler.
Never use near steps or swimming pools.
Do not allow hands, feet, hair, body parts, clothing, or similar articles, to come
in contact with moving parts of the Dirt Quad, including the brake, wheels or
drive train, while the motor is on. Do not touch the brake or electric motor on
your electric four wheeler when in use and/or immediately after riding, as
they can become very hot.
Never use headphones or a cell phone to talk or text when riding.
Never hitch a ride with another product or vehicle.
Do not ride the Dirt Quad in wet or icy weather and never immerse the
electric four wheeler in water, as the electrical and drive components could be
damaged by water or create other possible unsafe conditions.
Wet, slick, bumpy, uneven or rough surfaces may increase risks of use. Do not
ride the electric four wheeler in mud, ice, puddles or water. Avoid excessive
speeds that can be associated with downhill rides. Never risk damaging
surfaces, such as carpet or flooring, by use of an electric four wheeler indoors.
Do not ride at night or when visibility is limited.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled), elbow pads and kneepads. A helmet may be
legally required by local law or regulation in your area. A long-sleeved shirt,
long pants and gloves are recommended. Always wear athletic shoes (lace-up
shoes with rubber soles), and keep shoelaces tied and out of the way of the
wheels, brake, motor and drive system. Never ride barefooted or in sandals.
USING THE CHARGER
The charger supplied with the electric four wheeler should be regularly
examined for damage to the cord, plug, enclosure and other parts, and in the
event of such damage, the four wheeler must not be charged until the charger
has been repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from scooter when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
Dirt Quad with a damp cloth.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE
WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE
AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS
ATTENTION TO SAFE OPERATION. USE CAUTION.

BEFORE YOU BEGIN

Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
Because the Dirt Quad is 95 percent assembled and packed at the factory, there should not be any problems, even if
the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 4 for charging information).

WARNING:
DO NOT USE NON-RAZOR PRODUCTS
WITH YOUR RAZOR DIRT
QUAD. The Dirt Quad has been built
to certain Razor design specifications.
The original equipment
supplied at the time of sale was selected
on the basis of its compatibility
with the frame, fork and all other
parts. Certain aftermarket products
may or may not be compatible and
may void your warranty.
Product ID Locations:
(See locations to the left)

1. Footstep (Right Side)
2. Charger
3. Box (Not Shown)
4. Bottom of the Frame
   (Underneath the Unit)

Plastic Bag Contents:

• Charger
• Allen Wrenches
• Owner’s Manual

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.

ASSEMBLY AND SET-UP

Turn power switch off before conducting any maintenance
Attaching the Handlebars
Tool Required: 6 mm Allen Wrench

Note: Handlebar clamps are located
in the plastic bag with owner’s
manual and charger.

Note: The gap between the upper
clamp and lower clamp should be
equal on both sides of handlebar.

Inflating the Tires

Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your
purchase. Inflate the tires to the correct PSI before first time use.

Lower air pressure can result in a shorter ride time.
Periodically check all four tires. Reinflate when needed.

Using a bicycle tire pump equipped for a Schrader valve, inflate the tires to the PSI indicated on the sidewall of the tire.

Testing the Brake
To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted with a cable adjuster
to compensate for cable stretch and/or to fine-tune the lever movement to brake engagement. If brake is not engaging
properly, follow instructions for adjusting the brake outlined on page 5.

WARNING:
Failing to properly adjust and
tighten the bolts that affix the
handlebars can cause you to lose
control and crash.

WARNING:
Do not use the Dirt Quad for the
first time until you have inflated the
tires to the correct PSI. Failure to
do so may damage your Dirt Quad
and void your warranty.

WARNING:
Do not over inflate, as this could
damage the tire or wheel.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your tires, first make sure the pressure
gauge is working, then use very
short bursts to inflate to the correct
PSI. If you inadvertently over inflate
the tire, release the excess pressure
immediately.

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.

CHARGING THE BATTERY

Your Dirt Quad may not have a fully charged battery; therefore you must charge the battery prior to use.

• Initial charge time: 12 hours.

• Recharge time: up to 12 hours, even if the light turns green.
  Recommended maximum charging time is 24 hours.

• Always charge the battery immediately after riding.

• Fully charge battery before storing for extended
  periods of time.

• Unplug charger from the wall outlet when not in use.

• Failure to recharge battery periodically may result in a
  battery that will not accept a charge.

• Make sure the Dirt Quad’s power switch is turned OFF
  when unit is not in use. If the power switch is left on
  for an extended period of time, the battery may reach a
  stage at which it will no longer hold a charge.

• To ensure long battery life, never store the product in
  freezing or below freezing temperatures! Freezing will
  permanently damage the battery.

• Run time: Up to 40 minutes of continuous ride time.
  Run time may vary depending on riding conditions, rider
  weight, climate, and/or proper maintenance.

• Constant stopping and starting may shorten ride time.

• Battery life can vary depending on proper maintenance
  and usage of the unit.

Charger
(Note: Charger design may vary from one shown)

1 Plug the charger plug into wall
outlet. The light on the charger should be green.
Note: If green light (LED) does not
turn on, try a different outlet.

2 Make sure the power switch
is in the OFF position. Plug the
charger into the charger port on the Dirt Quad. The light on the charger
should turn red during charging. The
light will turn green again when
charging is complete.

WARNING:
Use ONLY with the recommended charger. Batteries are only to be
charged under adult supervision.
The charger is not a toy. Always
disconnect the charger before wiping down and/or cleaning the
Dirt Quad with a damp cloth.
The charger supplied with the Dirt
Quad should be regularly examined
for damage to the cord, plug,
enclosure and other parts. In the
event of such damage, the Dirt
Quad must not be charged until it
has been repaired or replaced.
Chargers have built-in overcharge
protection to prevent battery from
being overcharged.
Note: If the charger gets warm
during regular use, this is a
normal response and is no cause

for concern. If your charger does
not get warm during use, it does
not mean that it is not working
properly.
Wall outlet – Green (Stand By)
Wall outlet and Unit – Red (Charging)
Charging complete – Green (Charged)
Note: Continue charging unit even
if light turns green prior to 12 hours.
WARNING: Battery
charge can deplete over time.
Periodically recharge battery when
not in use.

PRE-RIDE CHECKLIST

Brake
Check the brake for proper function. When you squeeze the
brake lever, the brake should provide positive braking action.
When you apply the brake with the speed control on, the brake
cut-off switch will stop the motor.
Tires
Periodically inspect the tires for excess wear and replace as
needed. Regularly check the tire pressure and inflate as needed.
If you get a flat tire, the inner tube can be patched or a new tube
can be purchased from Razor or an authorized repair center.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck, bend or break the frame. Get in the habit of
inspecting your product on a regular basis.
Hardware/Loose Parts
Check and secure all fasteners before every ride. There should
not be any unusual rattles or sounds from loose parts or broken
components. If the unit is damaged, do not ride. Reference
“Safety Warnings” on page 1 of this manual.

Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads, kneepads, pants and long sleeves are
recommended. Always wear closed toe shoes (lace-up with
rubber soles) and keep shoelaces tied and out of the way of
the wheels, motor and drive system. NEVER RIDE BAREFOOTED
OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for electric product use. Check with your
insurance company for information regarding insurance.
Storage
Prolonged exposure to UV rays, rain and the elements may
damage the enclosure materials, store indoors when not in use.

USAGE

Starting the Dirt Quad
To start unit, turn on power switch; place both hands on
handlebars and apply the throttle with right hand.

Stopping the Dirt Quad
To stop unit, release the throttle and apply the brake until
the unit comes to a complete stop.

REPAIR AND MAINTENANCE

Turn power switch “OFF” before conducting any maintenance procedures.

• Read the instructions

• Remove charger plug

• Turn the power switch off

• Secure the unit under repair

• Exercise caution around
  exposed parts

• Contact Razor customer service
  if unsure about any repair
  or maintenance

1 To adjust the tension, thread the
brake lever adjuster in or out 1/4
to 1/2 turn until the desired brake
adjustment is attained. Most adjustments
are complete at this step. If
brake still needs further adjustment,
proceed to step 2 for rear brake.

2 Locate the rear brake caliper
and disc brake behind the right
rear wheel. The distance of the
brake wire between the end of
the cable and the anchor bolt
should be between 37 and 44 mm.
If the rear brake has too much
slack, loosen the rear anchor
bolt with a 5 mm Allen wrench
and pull the brake wire tighter
(direction indicated with arrow).

3 If the brake rotor is dragging
on the brake pads use your fingers
to twist the caliper adjuster
in either direction until rotor
is centered between pads.

WARNING: Failure to
recharge the battery at least once
a month may result in a battery
that will no longer hold a charge

WARNING:
The brake is capable of causing
the electric four wheeler to skid
the tire throwing an unsuspecting
rider. Practice in an open area
free from obstacles until you are
familiar with the brake function.
Avoid skidding to a stop as this
can cause you to lose contr

Note: The brake lever contains a
safety switch to cut power to the
motor when the brake is applied.
In an emergency, applying the
brake will always stop the product
from moving. Do not disable or
replace this lever with anything
other than a genuine Razor
replacement part.

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

Replacing the Fuse

Replacing the Chain
Tools Required: 6 mm Allen Wrench, 10 mm Wrench and Phillips Screwdriver.

WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.

WARNING:
Do not touch motor after use.
Motor is (or can be) very hot.

REPAIR AND MAINTENANCE

Chain and Sprocket

The chain will typically have a “loose spot” and “tight spot” corresponding with a particular sprocket rotational
position. This is normal and common to all chain-driven products due to run- out tolerances of the freewheel and
sprocket. Proper chain alignment must be maintained. If the chain is noisy or rough running, check the lubrication,
tension and alignment of the sprockets, in that order. The chain tensioner must be aligned and free from binding and
the tensioner spring(s) must be operating correctly.

Battery Care and Disposal

Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum battery
life, carefully read the “Charging the Battery” section on page 4 of this owner’s manual.

CONTAINS SEALED LEAD-ACID BATTERIES. BATTERIES MUST BE RECYCLED

Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed leadacid
batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state
approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota, it is
prohibited by law to throw away lead-acid batteries in the municipal waste stream.

Charger
The charger supplied with the Dirt Quad should be regularly examined for damage to the cord, plug, enclosure and
other parts, and in the event of such damage, the product must not be charged until it has been repaired or replaced.
Use ONLY with the recommended charger.

Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect
wheels for excess wear and adjust and replace drive train components as required.
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the
complete selection of replacement parts visit www.razor.com.
Repair Centers
For a list of authorized Razor repair centers:

• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.

WARNING:
To avoid a pinch or injury, keep
fingers away from moving sprockets
and chain

In the US and Canada only:
For more information regarding
recycling of rechargeable batteries,
call toll free 1-800-822-8837, or
visit http://www.call2recycle.org
WARNING: If a battery
leak develops, avoid contact with
the leaking acid and place the
damaged battery in a plastic bag.
Refer to the disposal instructions
at left. If acid comes into contact
with skin or eyes, flush with cool
water for at least 15 minutes and
contact a physician.
WARNING: Battery posts,
terminals and related accessories
contain lead and lead compounds.
Wash your hands after handling.

TROUBLESHOOTING GUIDE

Product should be fully charged prior to doing any troubleshooting and must be done by an adult ONLY.

Product does not run Product is rolling backwards
Undercharged battery
Throttle will not engage if the product is rolling backwards. Come to a
complete stop and then activate the throttle.
Charge the battery. A new battery should have been charged for at least
12 hours before using the product for the first time and up to 12 hours
after each subsequent use.
Check all connectors. Make sure the charger connector is tightly plugged
into the charging port, and that the charger is plugged into the wall.

Product suddenly stopped
working while in use
Loose wires or connectors
Burned-out fuse
Motor or electrical switch damage
Check all wires and connectors to make sure they are tight.
The fuse will burn out and automatically shut off the power if the motor
is overloaded.
An excessive overload, such as too heavy a rider or too steep a hill, could
cause the motor to overheat. Refer to replacing the fuse instructions on
page 6 of this manual. Correct the conditions that caused the fuse to burn
out and avoid repeatedly burning out fuse.
Contact your local Razor authorized service center for diagnosis and repair.

Short run time (less than
15 minutes per charge)
Undercharged battery
Brake is not adjusted properly
Charge the battery. A new battery should have been charged for at least
12 hours before using the product for the first time and up to 12 hours
after each subsequent use.
Check all wires and connectors. Make sure the battery connector is tightly
plugged into the charger connector, and that the charger is plugged into
the wall.
Refer to brake adjustment instructions on page 5 of this manual.

Product runs sluggishly
Sometimes the product doesn’t
run, but other times it does
Riding conditions are too stressful
Tires are not properly inflated
Product is overloaded
Loose wires or connectors
Motor or electrical switch damage
Use only on solid, flat clean and dry surfaces such as pavement or
level ground.
The tires are inflated when shipped, but they invariably will lose some
pressure between the point of manufacturing and your purchase. Refer to
instructions on page 3 of this manual to properly inflate tires.
Make sure you do not overload the product by allowing more than one
rider at one time, exceeding the maximum weight limit, going up too steep
a hill or towing objects behind the product.
Check all wires around the motor and all connectors to make sure they
are tight.
Contact your local Razor authorized service center for diagnosis and repair.

Product makes loud noises
or grinding sounds
Chain is too dry Apply a lubricant such as 3 in 1TM or Tri-FlowTM to the chain.

For more troubleshooting tips, a list of available replacement parts or to locate an authorized Service Center in your area,
visit our website at www.razor.com or call toll free +1 866 467 2967 to speak to a live Customer Service Representative

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on.

DIRT QUAD PARTS

1. Handlebar Grips (Right/Left)                        Chain Tensioner

2. Throttle                                                          Battery Cover (Right/Left)
   2-1 Sleeve                                          Rear Wheel Complete (Right/Left)

3. Handlebar                                                      Caliper Brake

4. Brake Lever Assembly                                   Disc Brake

5. Handlebar Clamps (x2)                                  Chain

6. Shock Absorber                                            Sprocket

7. Front Wheel Complete (Right/Left)            Chain Guard (Upper/Lower

8. Adjustable Tie Rod                                      Plastic Body with Seat

9. Control Module                                          On/Off Switch

10. Battery (2-12V/7Ah) w/Fuse                      Charger Port

11. Motor (350W)

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.

NOTICE: INSURANCE
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by Razor USA, could void the user’s authority to operate the equipment.

WARRANTY

Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing
defects for a period of 90 days from date of purchase. This Limited Warranty
does not cover normal wear and tear, tires, tubes or cables, or any damage,
failure or loss caused by improper assembly, maintenance, storage or use of
the Razor Dirt Quad.
This Limited Warranty will be void if the product is ever:
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an extended
warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write
the serial number below.
CUSTOMER SERVICE CONTACT INFORMATION

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact
information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional
Customer Service contact information is listed below:

AMERICAS
Razor USA LLC
P.O. Box 3610
Cerritos, CA 90703
USA
+1 866 467 2967
Monday – Friday
8:00 AM – 5:00 PM Pacific Time
customersupport@razorusa.com

DISTRIBUTED IN AUSTRALIA BY:
Funtastic Limited
Suite 2.01, Level 2
315 Ferntree Gully Road
Mount Waverley VIC 3149,
Australia
+1 800 244 543
info@funtastic.com.au

I MPORTED IN JAPAN BY B-PLUS ASIA
CORP.
Razor USA LLC
Kurokawa 3-1, Asaoku,
Kawasaki, Kanagawa
215-0035
Japan
+81 (0) 44 328 9057 Tel
+81 (0) 44 328 9067 Fax
info@razor-asia.com

Razor DIRT QuadManual Optimized

Razor DIRT QuadManual Original

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>