anslut 007294 Lamp Socket DCL Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 007294 Lamp Socket DCL
LAMP SOCKET DCL
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions).
Care for the environment!
Recycle discarded product in accordance with local regulations.
SAFETY INSTRUCTIONS
- Do not connect power strips to each other.
- Do not cover the power strip.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried out by an authorised electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords and light sockets. Incorrect installation can result in fatal injury and the risk of fire.
WARNING
The product is only intended for permanent installation.
SYMBOLS
- Read the instructions.
- Approved in accordance with the relevant directives.
- Recycle discarded product as electrical waste.
TECHNICAL DATA
-
Rated voltage
230 V ~ 50 Hz -
Max. capacity
15 kg -
Current
6A
ASSEMBLY
INSTALLATION
- Connect the wires.
- Lock in place with the screws.
- Open the cable inlet, if necessary.
- Put on the casing and tighten the screw.
FIG. 1
Releasing the casing
Release the casing as shown.
FIG. 2
Disconnection of the conductors
FIG. 3
Documents / Resources
|
anslut 007294 Lamp Socket
DCL
[pdf] Instruction Manual
007294, Lamp Socket DCL, 007294 Lamp Socket DCL, Socket DCL, DCL
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>