PDQ 6400 Series Exit Devices Instruction Manual
- June 4, 2024
- PDQ
Table of Contents
PDQ 6400 Series Exit Devices Instruction Manual
ADJUST FOR DOOR THICKNESS
- Pin can be moved for 1¾”, 2″ or 2 ¼”
- Remove clip, move pin to desired location, reinstall clip
HAND TRIM – 6W/6N Only
-
Adjust lever for proper handing
-
Install lever drive spindle
INSTALL TRIM
- Secure trim and exit device to door
- Trim will always thru bolt to exit device
- Verify operation of both the trim and the exit device
- 6T only – Secure handle with mounting screw and finish washer
REMOVE BACKPLATE
- Remove retaining clip
- Remove (4) screws
- Remove Backplate
DETERMINE FUNCTION
- Standard 6W includes conversion kit within escutcheon
- 6N/6T conversion kit can be ordered separately
INSTALL NEW FUNCTION
-
nstall desired function
-
08 Function: Spring engages beneath boss on locking mechanism. Spring spacer must be installed on inside of spring before tightening screw
-
09 Function: Extension spring to go around boss on locking mechanism
-
-
For 6W Only: Install unneeded function into storage location
-
Reinstall backplate and retaining clip
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>