Whirlpool WTW5015LW Series Washing Machine Instruction Manual
- September 30, 2024
- Whirlpool
Table of Contents
Whirlpool WTW5015LW Series Washing Machine
Specifications
- Model Numbers: WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, 7MWTW5057MW, WTW5020SW, WTW5025SW
- Cu Ft Capacity:
- WTW5015LW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
- WTW5010LW – 4.6 cu ft DOE (US), 5.3 cu ft IEC (CAN)
- WTW5057LW – 4.7 cu ft / 4.8 cu ft DOE (US), 5.4 cu ft / 5.5 cu ft IEC (CAN)
- 7MWTW5017MW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
- 7MWTW5057MW – 4.7 cu ft DOE (US), 5.4 cu ft IEC (CAN)
- WTW5020SW – 4.6 cu ft DOE (US), 5.3 cu ft IEC (CAN)
- WTW5025SW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
- Minimum Circuit Amperage Rating: 15 A
- Operating Voltage: 120 VAC only
- Operating Frequency: 60 Hz
DETAILED PLANNING DIMENSIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and INSTALLATION INSTRUCTIONS, located in your appliance’s Owner’s Manual, before installing and operating this appliance.
Electrical Requirements
WTW5015LW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
WTW5010LW – 4.6 cu ft DOE (US), 5.3 cu ft IEC (CAN)
WTW5057LW – 4.7 cu ft / 4.8 cu ft DOE (US), 5.4 cu ft / 5.5 cu ft IEC (CAN)
7MWTW5017MW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
7MWTW5057MW – 4.7 cu ft DOE (US), 5.4 cu ft IEC (CAN)
WTW5020SW – 4.6 cu ft DOE (US), 5.3 cu ft IEC (CAN)
WTW5025SW – 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN)
Minimum Circuit Amperage Rating| 15 A
Operating Voltage| 120 VAC only
Operating Frequency| 60 Hz
Product Dimensions
WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, 7MWTW5057MW, WTW5020SW,
WTW5025SW
| | in (minimum)| mm (minimum)| in (maximum)| mm
(maximum)
A| Height (with feet)| 411∕2| 1048| 421∕4| 1074
B| Width| 273/4| 683| –| –
C| Top of Lid Height (with feet)| 381∕2| 962| 382∕3| 982
D| Depth| 27| 692| –| –
Product Dimensions
WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, 7MWTW5057MW, WTW5020SW,
WTW5025SW
| | in (minimum)| mm (minimum)| in (maximum)| mm
(maximum)
E| Height with Lid Open| 553/4| 1415| 563∕8| 1432
F| Height of Lid| 187∕8| 449| –| –
G| Width of Lid| 231∕4| 593| –| –
H| Water Inlet Valves Height| 377∕8| 962| 391∕2| 1003
I| Water Inlet Valves from Side| 41∕2| 116| –| –
J| Power Cord from Side| 21∕2| 63| –| –
K| Power Cord Height| 373∕8| 950| 371∕2| 953
| Power Cord Length| 62| 1530| –| –
L| Drain Hose Outlet Height| 71∕4| 170| 73∕4| 197
M| Drain Hose Outlet from Side| 45∕16| 107| –| –
| Drain Hose Length| 41| 1040| –| –
| Diameter of Drain Hose| 1| 25| –| –
Recessed area or closet installation
NOTE: All washers should have 20″ (508 mm) clearance.
Dimensions show recommended spacing allowed, except for closet door
ventilation openings which are minimum required. This washer has been tested
for installation with a spacing of 0″ (0 mm) clearance on the sides. Consider
allowing more space for ease of installation and servicing, and spacing for
companion appliances and clearances for walls, doors, and floor moldings. Add
spacing of 1″ (25 mm) on all sides of the washer to reduce noise transfer. If
a closet door or louvered door is installed, top and bottom air openings in
the door are required. ®/TM ©2024 Whirlpool. All rights reserved. Used under
license in Canada.
FAQs
- Q: What should I do if the appliance is not functioning properly?
- A: If you encounter any issues with the appliance’s performance, refer to the troubleshooting section in the Owner’s Manual or contact customer support for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>